CompuShack FASTline-II PCI UTP Quattro on OpenBSD 3.1

[Marc Balmer <marc_(_at_)_msys_(_dot_)_ch>]

Hi All

I am having problems with the following quad fast ethernet adapter:

CompuShack FASTline-II PCI UTP Quattro

This adapter is based on the Digital Semiconductor 21143 chipset which  
is supposed to be supported by OpenBSD.

If I connect more than one ethernet interface and transmit some data  
over the interfaces (it's supposed to be a firewall) I get the the  
error message "dc0: watchdog timeout" after a short period of time.  If  
I use only one interface, there is absolutely no problem.

I have seen that some people reported the same problems with this card,  
but I never found a solution posted to this problem.

Any idea what causes this?

Regards,
Marc

Here is my dmesg output:

OpenBSD 3.1 (GENERIC) #59: Sat Apr 13 15:28:52 MDT 2002
    deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III (Coppermine) ("GenuineIntel" 686-class) 938 MHz
cpu0:  
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,M 
MX,FXSR,SIMD
real mem  = 535326720 (522780K)
avail mem = 490545152 (479048K)
using 5689 buffers containing 26869760 bytes (26240K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(dc) BIOS, date 02/27/01, BIOS32 rev. 0 @  
0xf0ba0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x13b2
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf1310/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB PCI-ISA" rev  
0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xc000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82815 Graphics" rev 0x02
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x02
pci1 at ppb0 bus 1
ppb1 at pci1 dev 9 function 0 "DEC 21152 PCI-PCI" rev 0x03
pci2 at ppb1 bus 2
dc0 at pci2 dev 0 function 0 "DEC 21142/3" rev 0x41: irq 5 address  
00:00:cb:26:10:48
icsphy0 at dc0 phy 5: ICS1890 10/100 media interface, rev. 3
dc1 at pci2 dev 4 function 0 "DEC 21142/3" rev 0x41: irq 5 address  
00:00:cb:26:10:48
icsphy1 at dc1 phy 5: ICS1890 10/100 media interface, rev. 3
dc2 at pci2 dev 8 function 0 "DEC 21142/3" rev 0x41: irq 5 address  
00:00:cb:26:10:48
icsphy2 at dc2 phy 5: ICS1890 10/100 media interface, rev. 3
dc3 at pci2 dev 12 function 0 "DEC 21142/3" rev 0x41: irq 5 address  
00:00:cb:26:10:48
icsphy3 at dc3 phy 5: ICS1890 10/100 media interface, rev. 3
pcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x02: DMA,  
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <MAXTOR 6L060J3>
wd0: 16-sector PIO, LBA, 57259MB, 16383 cyl, 16 head, 63 sec, 117266688  
sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LITEON, CD-ROM LTN526S, YS0A> SCSI0  
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"Intel 82801BA SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c040 netmask c060 ttymask c0e2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302