[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

cdrecord with atapi drives, makedev.su



Hello,

I have atapi cdwriters connected and Openbsd 3.1 installed.
I have installed the cdrecord port version 1.9.
cdrecord -scanbus tells:

Cdrecord 1.9 (i386-unknown-openbsd3.1) Copyright (C) 1995-2000 Jörg Schilling
cdrecord: No such file or directory. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root.

A part of dmesg looks like:

pcib0 at pci0 dev 7 function 0 "VIA VT82C586 PCI-ISA" rev 0x41
pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x06: ATA33, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MPG3204AT E>
wd0: 16-sector PIO, LBA, 19546MB, 16383 cyl, 16 head, 63 sec, 40031712 sectors
wd1 at pciide0 channel 0 drive 1: <FUJITSU MPE3136AT>
wd1: 16-sector PIO, LBA, 13031MB, 16383 cyl, 16 head, 63 sec, 26688576 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PLEXTOR, CD-R PX-W4012A, 1.02> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
pchb1 at pci0 dev 7 function 3 "VIA VT82C586 Power Mgmt" rev 0x10
pciide1 at pci0 dev 10 function 0 "Promise PDC20269" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 11 for native-PCI interrupt
atapiscsi1 at pciide1 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
atapiscsi1(pciide1:1:1): using PIO mode 3
cd1 at scsibus1 targ 0 lun 0: <PLEXTOR, CD-R PX-W4012A, 1.02> SCSI0 5/cdrom removable
cd1(pciide1:1:1): using PIO mode 3
siop0 at pci0 dev 11 function 0 "Symbios Logic 53c895" rev 0x01: irq 10, has RAM
siop0: scsi bus reset
scsibus2 at siop0: 16 targets
siop0: switching to single-ended mode
rl0 at pci0 dev 12 function 0 "Realtek 8139" rev 0x10: irq 9 address 00:00:e8:63:09:f3
rlphy0 at rl0 phy 0: RTL internal phy
isa0 at pcib0
isadma0 at isa0


In the cdrecord source there is a script MAKEDEV.su. This tells me:

mknod: major or minor number too large


Is there something that can be done to get atapi writers run?

-Hanspeter