[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

SB Live support in OBSD 3.1

Hi all,

I just updated my source tree after finding this "# Support the Creative Labs SB Live! sound card with emu(4)." in the log of changes between 3.0 and 3.1. I'm still not able to hear music using either aucat or mpg123. Below is a demsg output with GENERIC 3.1 kernel:

OpenBSD 3.1 (GENERIC) #0: Fri Jul 19 08:13:13 EST 2002
cpu0: AMD Athlon Model 6 (Palomino) ("AuthenticAMD" 686-class) 1.53 GHz
real mem = 314159104 (306796K)
avail mem = 285032448 (278352K)
using 3860 buffers containing 15810560 bytes (15440K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(56) BIOS, date 02/15/02, BIOS32 rev. 0 @ 0xfd860
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xfd860/0x7a0
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdf30/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB PCI-ISA" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x6000! 0xdc000/0x4000!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX" rev 0x01
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x08
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <VMware Virtual IDE Hard Drive>
wd0: 64-sector PIO, LBA, 8000MB, 17338 cyl, 15 head, 63 sec, 16384410 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <NECVMWar, VMware IDE CDR10, 1.00> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x00: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Mgmt" rev 0x08 at pci0 dev 7 function 3 not configured
vga1 at pci0 dev 15 function 0 vendor "VMware", unknown product 0x405 rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
le1 at pci0 dev 16 function 0 "AMD 79c970 PCnet-PCI LANCE" rev 0x10
le1: address 00:50:56:41:32:0c
le1: 8 receive buffers, 2 transmit buffers
le1: interrupting at irq 9
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v4.13
midi0 at sb0: <SB MIDI UART>
audio0 at sb0
opl at sb0 not configured
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pccom2: irq 5 already in use
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c240 netmask c240 ttymask d242
pctr: user-level cycle counter enabled
mtrr: CPU supports MTRRs but not enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302

Here too I get the same message "opl at sb0 not configured" as I used to get before (3.0). The hardware specs of my sound card are:
Creative Labs Sound Blaster Live
model # CT4780
which I believe is a PCI512 card. The card works fine under Redhat Linux 7.3 and uses the EMU10K1 driver.

If I understand the change log on the website correctly, this card should have been supported under 3.1. Am I correct? Is there anything else I need to do to get it running?


Chat with friends online, try MSN Messenger: http://messenger.msn.com

Visit your host, monkey.org