[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

CDROM not found



Hello,
I installed an OpenBSD 3.0 a few days ago and it seems it doesn't find my cdrom. I'm an OpenBSD newbie and that's why I'm using a GENERIC kernel. My cdrom is on IDE and it's a sony atapi cdrom.
Here's my dmesg output :

OpenBSD 3.0-current (GENERIC) #49: Wed Feb 13 16:18:32 MST 2002
    deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Duron ("AuthenticAMD" 686-class) 601 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem  = 133738496 (130604K)
avail mem = 118444032 (115668K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(a2) BIOS, date 06/27/00, BIOS32 rev. 0 @ 0xfb230
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xb6b0
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdbb0/128 (6 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11 12
pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C596A PCI-ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x10000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8363 Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "VIA VT8363 PCI-AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Nvidia Riva TNT2" rev 0x15
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "VIA VT82C686 PCI-ISA" rev 0x22
pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x10: ATA66, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST315320A>
wd0: 16-sector PIO, LBA, 14594MB, 16383 cyl, 16 head, 63 sec, 29888820 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
pciide0:0:1: device timeout waiting to send SCSI packet
sd0 at scsibus0 targ 0 lun 0: <, , > SCSI0 0/direct fixed
wdc_atapi_start: not ready, st = 58
pciide0:0:1: device timeout waiting to send SCSI packet
sd0: mode sense (4) returned nonsense; using fictitious geometry
sd0(atapiscsi0:0:0): Check Condition on opcode 0x25
    SENSE KEY: Not Ready
     ASC/ASCQ: Medium Not Present
sd0(atapiscsi0:0:0): could not get size
sd0: 0MB, 0 cyl, 64 head, 32 sec, 512 bytes/sec, 0 sec total
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
sd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x10: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 7 function 3 "VIA VT83C572 USB" rev 0x10: irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pchb1 at pci0 dev 7 function 4 "VIA VT82C686 SMBus" rev 0x30
rl0 at pci0 dev 9 function 0 "Realtek 8139" rev 0x10: irq 11 address 00:50:fc:01:8e:69
rlphy0 at rl0 phy 0: RTL internal phy
emu0 at pci0 dev 10 function 0 "Creative Labs SoundBlaster Live" rev 0x07: irq 12
ac97: codec id 0x83847608 (SigmaTel STAC9708/11)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at emu0
"Creative Labs SoundBlaster Live Digital Input" rev 0x07 at pci0 dev 10 function 1 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 4060 netmask 4860 ttymask 48e2
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
ums0 at uhub0 port 2 configuration 1 interface 0
ums0: Microsoft Microsoft IntelliMouse\M-. Optical, rev 1.10/1.21, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
wsmouse0 at ums0 mux 0
duplicate IP address 0.0.0.0 sent from ethernet address 00:07:eb:04:0b:00
duplicate IP address 0.0.0.0 sent from ethernet address 00:07:eb:04:0b:00

Thanks for help ...
Marek Sulovsky


Visit your host, monkey.org