Re: Problem with dual nics

[Ryan <SpanglerRP22_(_at_)_uww_(_dot_)_edu>]

Here is the dmesg output:

OpenBSD 3.0 (GENERIC) #94: Thu Oct 18 14:48:27 MDT 2001
    deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: F00F bug workaround installed
cpu0: Intel Pentium (P54C) ("GenuineIntel" 586-class) 166 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8
real mem  = 133804032 (130668K)
avail mem = 118681600 (115900K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(55) BIOS, date 06/21/96, BIOS32 rev. 0 @ 0xf7872
pcibios0 at bios0: rev. 2.1 @ 0xf7820/0x840
pcibios0: PCI BIOS has 5 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 9 10 11
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371SB PCI-ISA" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82439HX" rev 0x01
pcib0 at pci0 dev 7 function 0 "Intel 82371SB PCI-ISA" rev 0x01
pciide0 at pci0 dev 7 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <QUANTUM SIROCCO1700A>
wd0: 8-sector PIO, LBA, 1628MB, 3309 cyl, 16 head, 63 sec, 3335472 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MITSUMI, CD-ROM FX120T !B, b01> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 0, DMA mode 2
sis0 at pci0 dev 15 function 0 "National Semiconductor DP83815 10/100" rev 0x00: irq 11 address 00:02:e3:1f:f7:c4
nsphyter0 at sis0 phy 0: DP83815 10/100 integrated, rev. 1
xl0 at pci0 dev 16 function 0 "3Com 3c905 100Base-TX" rev 0x00: irq 10 address 00:60:08:2f:3e:c5
nsphy0 at xl0 phy 24: DP83840 10/100 media interface, rev. 1
vga1 at pci0 dev 18 function 0 "Matrox MGA Millenium 2064W (Storm)" rev 0x01
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
isapnp0 at isa0 port 0x279: read port 0x203
sb1 at isapnp0 "Creative ViBRA16C PnP, CTL0001, , Audio" port 0x220/16,0x330/2,0x388/4 irq 5 drq 1,5: dsp v4.13
midi1 at sb1: <SB MPU-401 UART>
audio0 at sb1
opl0 at sb1: model OPL3
midi2 at opl0: <SB Yamaha OPL3>
joy0 at isapnp0 "Creative ViBRA16C PnP, CTL7001, PNPB02F, Game" port 0x200/8
biomask c040 netmask cc40 ttymask dcc2
pctr: 586-class performance counters and user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302

Here is the file hostname.sis0

inet 192.168.1.1 255.255.240.0 NONE media 10baseT

Here is the file hostname.xl0

dhcp NONE NONE NONE 



-- 
Ryan Spangler
428 N Harmony Ln, Apt. 3
Whitewater, WI 53190
(262) 473-8392
SpanglerRP22_(_at_)_uww_(_dot_)_edu