[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Lance Ethernet PCI (AMD PCnet) not working properly in OpenBSD 3.0



dmesg below.

-=-
You can now flame me, I am full of love.
-Miguel de Icaza, Ximian developer
-=-=
OpenBSD 3.0 (GENERIC) #94: Thu Oct 18 14:48:27 MDT 2001
    deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: F00F bug workaround installed
cpu0: Intel Pentium (P54C) ("GenuineIntel" 586-class) 199 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8
real mem  = 100249600 (97900K)
avail mem = 87531520 (85480K)
using 1249 buffers containing 5115904 bytes (4996K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 07/15/95, BIOS32 rev. 0 @ 0xfdb60
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf6210/112 (5 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371SB PCI-ISA" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x800
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82437VX" rev 0x02
pcib0 at pci0 dev 7 function 0 "Intel 82371SB PCI-ISA" rev 0x01
pciide0 at pci0 dev 7 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC AC2850F>
wd0: 16-sector PIO, LBA, 814MB, 1654 cyl, 16 head, 63 sec, 1667232 sectors
wd0(pciide0:0:0): using PIO mode 0, DMA mode 1
xl0 at pci0 dev 8 function 0 "3Com 3c905C 100Base-TX" rev 0x30: irq 9 address 00:01:02:71:ab:3a
ukphy0 at xl0 phy 24: Generic IEEE 802.3u media interface
ukphy0: OUI 0x00601d, model 0x0035, rev. 0
le1 at pci0 dev 9 function 0 "AMD 79c970 PCnet-PCI LANCE" rev 0x25
le1: address 00:60:b0:ee:a4:65
le1: 8 receive buffers, 2 transmit buffers
le1: interrupting at irq 10
vga1 at pci0 dev 10 function 0 "S3 ViRGE DX/GX" rev 0x01
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask 4040 netmask 4640 ttymask 46c2
pctr: 586-class performance counters and user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302