[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Followup: HP Vectra hanging

It was suggested that I post the dmesg output from the box I'm trying to
install on:

OpenBSD 3.0 (RAMDISKB) #78: Thu Oct 18 15:03:57 MDT 2001
cpu0: F00F bug workaround installed
cpu0: Intel Pentium/MMX ("GenuineIntel" 586-class) 233 MHz
real mem  = 100245504 (97896K)
avail mem = 88821760 (86740K)
using 1249 buffers containing 5115904 bytes (4996K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(b1) BIOS, date 04/15/98, BIOS32 rev. 0 @
apm0 at bios0: Power Management spec V1.2
pcibios0 at bios0: rev. 2.1 @ 0xf6eb0/0x990
pcibios0: PCI BIOS has 7 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 11
pcibios0: PCI Interrupt Router at 000:15:0 ("Intel 82371SB PCI-ISA" rev
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82439HX" rev 0x03
xl0 at pci0 dev 6 function 0 "3Com 3c905B 100Base-TX" rev 0x24: irq 11
exphy0 at xl0 phy 24: 3Com internal media interface
vga1 at pci0 dev 13 function 0 "S3 Trio64V2/DX" rev 0x16
wsdisplay0 at vga1: console (80x25, vt100 emulation)
"Intel 82371SB PCI-ISA" rev 0x01 at pci0 dev 15 function 0 not
pciide0 at pci0 dev 15 function 1 "Intel 82371SB IDE" rev 0x00: DMA,
channel 0 wired to
compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALL ST4.3A>
wd0: 16-sector PIO, LBA, 4104MB, 8895 cyl, 15 head, 63 sec, 8405775
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HITACHI, CDR-8330, 0007> SCSI0 5/cdrom
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
isapnp0 at isa0 port 0x279: read port 0x203
"AZT1008 PnP SOUND DEVICE, AZT0500, , IDE CDROM DISAB" at isapnp0 port
0x0,0x0 irq 0 not
"AZT1008 PnP SOUND DEVICE, AZT1008, , AUDIO" at isapnp0 port
0x220/16,0x388/8,0x534/4 irq 5
drq 1,3 not configured
"AZT1008 PnP SOUND DEVICE, AZT2001, , MPU401 MIDI" at isapnp0 port
0x330/2 irq 9 not
"AZT1008 PnP SOUND DEVICE, AZT3001, , GAME PORT" at isapnp0 port 0x200/8
not configured
biomask c040 netmask c840 ttymask c842
rd0: fixed, 3560 blocks
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02

This is from a HP Vectra VL5/233MMX. I'm going through the config files
I was pointed to, trying to ID all the differences between floppy30 anf

Thanks for all of the help.

Mitchell Surface

Visit your host, monkey.org