[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

savecore dumps core file on boot (swap related?)



Everytime I (re)boot savecore insists on writing a dump core
on /var/crash:

savecore: reboot
Dec 19 16:08:34 tanit savecore: reboot
savecore: system went down at Mon Dec 17 18:05:02 2001
savecore: writing core to: /var/crash/bsd.19.core
savecore: writing kernel to: /var/crash/bsd.19

(the date and time of the crash, 17 18:05:02, is the same
everytime, just the # number changes).

Since, according to Nick Holland, this might be related to
swap not being correctly cleaned, I booted on single user
mode and newfs on sd0b and wd0b.  But savecore is persisting.

Does anyone know how this could be solved or if it could be
related to something different?


OpenBSD 3.0 (GENERIC) #94: Thu Oct 18 14:48:27 MDT 2001
    deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon Model 4 (Thunderbird) ("AuthenticAMD" 686-class) 909 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem  = 536375296 (523804K)
avail mem = 491732992 (480208K)
using 5689 buffers containing 26923008 bytes (26292K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(ef) BIOS, date 04/30/01, BIOS32 rev. 0 @ 0xf0f70
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x1842
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf1770/208 (11 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x10b9 product 0x1533
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x800 0xcc000/0x4800
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Acer Labs M1647 PCI" rev 0x04
ppb0 at pci0 dev 1 function 0 "Acer Labs M5247 AGP/PCI-PCI" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Matrox MGA G200 AGP" rev 0x01
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ohci0 at pci0 dev 2 function 0 "Acer Labs M5237 USB" rev 0x03: irq 9, OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pciide0 at pci0 dev 4 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc4: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST38630A>
wd0: 16-sector PIO, LBA, 8207MB, 16383 cyl, 16 head, 63 sec, 16809660 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ohci1 at pci0 dev 6 function 0 "Acer Labs M5237 USB" rev 0x03: irq 5, OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcib0 at pci0 dev 7 function 0 "Acer Labs M1543 PCI-ISA" rev 0x00
xl0 at pci0 dev 9 function 0 "3Com 3c905C 100Base-TX" rev 0x74: irq 15 address 00:50:04:e9:b3:65
exphy0 at xl0 phy 24: Broadcom 3C905C internal PHY, rev. 6
eap0 at pci0 dev 11 function 0 "Ensoniq CT5880" rev 0x02pci_intr_map: no mapping for pin A
: couldn't map interrupt
ahc1 at pci0 dev 12 function 0 "Adaptec AHA-2940AU" rev 0x03: irq 11
ahc1: Single Channel A, SCSI Id=7, 3/255 SCBs
scsibus0 at ahc1: 8 targets
ahc1: target 0 synchronous at 20.0MHz, offset = 0xf
sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST39173N, 6244> SCSI2 0/direct fixed
sd0: 8683MB, 7501 cyl, 10 head, 237 sec, 512 bytes/sec, 17783240 sec total
ahc1: target 2 synchronous at 20.0MHz, offset = 0xf
cd0 at scsibus0 targ 2 lun 0: <PIONEER, DVD-ROM DVD-305, 1.00> SCSI2 5/cdrom removable
"Acer Labs M7101 Power Mgmt" rev 0x00 at pci0 dev 17 function 0 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 4a60 netmask ca60 ttymask dae2
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 81
dkcsum: sd0 matched BIOS disk 80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02



-- 
Horacio