[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Notebook Panic with Linksys Wireless PCMCIA card

I have a Toshiba Satellite Pro T2400CT that has been happily running
OpenBSD since 2.6 or so.
However, I now want to make it my base station.
I have a Linksys WPC11 PCMCIA card that is on the supported list of the
wi driver.
I recently upgraded my laptop to OpenBSD 2.9 and I have made no
modifications at all to the kernel, etc.

When I insert the Linksys card, or boot with it inserted I get this:
pcmcia1 at pcic0 controller0 socket1
wi0 at pcmcia1 function0 "Instant Wireless ,  Network PC Card, Version
kernel: reserved trap trap, code=0
Stopped at      _Xrsvd: push1   $0

As far as I can tell the wi driver is there and I certainly didn't
expect a system panic from booting with the card.  I tried the card in
both PCMCIA slots, and I get the same result.  My Ethernet card works
fine in either slot.

Any ideas what is wrong?

Thanks in advance.

my dmesg:
OpenBSD 2.9 (GENERIC) #653: Sat Apr 28 13:57:59 MDT 2001
cpu0: Intel 486DX2 ("GenuineIntel" 486-class)
cpu0: FPU,V86
real mem  = 12365824 (12076K)
avail mem = 6553600 (6400K)
using 176 buffers containing 720896 bytes (704K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(91) BIOS, date 09/27/94
apm0 at bios0: Power Management spec V1.1
apm0: battery life expectancy 100%
apm0: AC on, battery charge high, charging, estimated 3:00 hours
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xe0000/0x10000
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072
wsdisplay0 at vga0: console (80x25, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
aic0 at isa0 port 0x340/32 irq 11
scsibus0 at aic0: 8 targets
wdc0 at isa0 port 0x1f0/8 irq 14
wd0 at wdc0 channel 0 drive 0: <TOSHIBA MK1924FCV>
wd0: 16-sector PIO, LBA, 518MB, 1053 cyl, 16 head, 63 sec, 1061712
wd0(wdc0:0:0): using PIO mode 4
sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01
midi0 at sb0: <SB MIDI UART>
audio0 at sb0
opl0 at sb0: model OPL3
midi1 at opl0: <SB Yamaha OPL3>
pcppi0 at isa0 port 0x61
midi2 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16450, no fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/65536
pcic0 controller 0: <Intel 82365SL rev 1> has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
ep1 at pcmcia0 function 0 "3Com Corporation, 3C589, TP/BNC LAN Card Ver.
2a" port 0x360/16 irq 3: address 00:20:af:8d:5d:f5, utp/aui/bnc (default
pcmcia1 at pcic0 controller 0 socket 1
pcic0: irq 9, polling enabled
biomask 4840 netmask 4848 ttymask 5aca
pctr: no performance counters in CPU
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302

[demime 0.98d removed an attachment of type text/x-vcard which had a name of harris.vcf]