[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

ssh-add [-l|-L]



% man ssh-add
...
     -l      Lists fingerprints of all identities currently represented by the
             agent.

     -L      Lists public key parameters of all identities currently repre-
             sented by the agent.
...

% ssh-agent zsh
% ssh-add
Enter passphrase for /home/jakemsr/.ssh/id_dsa: <passphrase entered>
Identity added /home/jakemsr/.ssh/id_dsa (/home/jakemsr/.ssh/id_dsa)
% ssh-add -l
Enter passphrase for /home/jakemsr/.ssh/id_dsa: <passphrase entered>
Identity added /home/jakemsr/.ssh/id_dsa (/home/jakemsr/.ssh/id_dsa)
% ssh-add -L
Enter passphrase for /home/jakemsr/.ssh/id_dsa: <passphrase entered>
Identity added /home/jakemsr/.ssh/id_dsa (/home/jakemsr/.ssh/id_dsa)
%

Huh?

[:r /var/run/dmesg.boot]
OpenBSD 2.9-current (FUNK) #0: Tue Aug 21 11:38:19 PDT 2001
    root_(_at_)_funk:/usr/src/sys/arch/i386/compile/FUNK
cpu0: AMD Athlon Model 4 (Thunderbird) ("AuthenticAMD" 686-class) 751 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem  = 267956224 (261676K)
avail mem = 245891072 (240128K)
using 3296 buffers containing 13500416 bytes (13184K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(4e) BIOS, date 09/06/00, BIOS32 rev. 0 @ 0xfb410
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xb890
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfde80/144 (7 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C596A PCI-ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8363 Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "VIA VT8363 PCI-AGP" rev 0x00
pci1 at ppb0 bus 1
pcib0 at pci0 dev 7 function 0 "VIA VT82C686A PCI-ISA" rev 0x22
pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x10: ATA66, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD153AA-00BAA0>
wd0: 16-sector PIO, LBA, 14679MB, 16383 cyl, 16 head, 63 sec, 30064608 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SAF, CD-RW4432A, 1.1A> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
"VIA VT83C572 USB" rev 0x10 at pci0 dev 7 function 2 not configured
"VIA VT83C572 USB" rev 0x10 at pci0 dev 7 function 3 not configured
pchb1 at pci0 dev 7 function 4 "VIA VT82C686A SMBus" rev 0x30
auvia0 at pci0 dev 7 function 5 "VIA VT82C686A AC-97 Audio" rev 0x20: irq 5
ac97: codec id 0x414c4325
ac97: codec features Realtek 3D
auvia0: warning: codec doesn't support hardware AC'97 2.0 Variable Rate Audio
audio0 at auvia0
vga0 at pci0 dev 9 function 0 "3DFX Interactive Voodoo3" rev 0x01
wsdisplay0 at vga0: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
dc0 at pci0 dev 12 function 0 "ADMtek AN983" rev 0x11: irq 11 address 00:00:00:04:00:00
ukphy0 at dc0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000895, model 0x0001, rev. 0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c040 netmask c840 ttymask d8c2
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
wd0a:  aborted command, interface CRC error reading fsbn 64 of 64-79 (wd0 bn 127; cn 0 tn 2 sn 1), retrying
wd0: transfer error, downgrading to Ultra-DMA mode 3
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 3
wd0a:  aborted command, interface CRC error reading fsbn 64 of 64-79 (wd0 bn 127; cn 0 tn 2 sn 1), retrying
wd0: soft error (corrected)

-- 
<jakemsr_(_at_)_jakemsr_(_dot_)_com>
<jakemsr_(_at_)_clipper_(_dot_)_net>
<jakemsr_(_at_)_granitesky_(_dot_)_com>



Visit your host, monkey.org