Re: ppp with a Siemens cell-phone

[Henning Brauer <lists-openbsd_(_at_)_bsws_(_dot_)_de>]

On Mon, Aug 20, 2001 at 05:04:30PM +0200, Felix Kronlage wrote:
> On Mon, Aug 20, 2001 at 03:16:12PM +0200, Henning Brauer wrote:
> 
> > yes, s35i. The only important piece here is the port speed, it is fixed to
> > 19200 bit/s. Excerpt from my ppp.conf:
> >   set device /dev/tty00
> >   set speed 19200
> > Works like a charm.
> > No special settings needed otherwise.
> 
> mmmh. weird. Here's my ppp.conf:
> 
> | default:
> |  set log Phase Chat LCP IPCP CCP tun command
> |  set device /dev/tty00
> |  set speed 19200
> | set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT OK-AT-OK 
> |ATE1Q0 OK \\ dATDT\\T TIMEOUT 40 CONNECT"
> 
> still hangs :(

Uh. Using the original Siemens serial cable?
At a second glance it looks like I changed the dial string a bit - the
timeouts are higher.

default:
 set device /dev/tty00
 set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 15 \"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 80 CONNECT"

bsws:
 set speed 19200
 set phone 04037503XXX
 set log Phase Chat LCP IPCP CCP tun command
 set login
 set authname brahe
 set authkey XXXXXXXXXXXXX
 set timeout 60
 set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
 add default HISADDR
 enable dns
 allow user brahe


-- 
* Henning Brauer, hostmaster_(_at_)_bsws_(_dot_)_de, http://www.bsws.de *
* Roedingsmarkt 14, 20459 Hamburg, Germany               *
Unix is very simple, but it takes a genius to understand the simplicity.
(Dennis Ritchie)