[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Mounting of Linux drive(not working)

Hmm, I recently installed a snapshot of OpenBSD on august 3rd(So it's a 
august 3rd snapshot).

I have OpenBSD installed on wd0, and I had mandrake linux with default 
partitioning installed on wd1.  Attached is my dmesg and disklabel -v wd1.

Shown in /dev is wd1a - wd1p.  Since I did not know anything about the 
linux partitioning, since I only used it to watch movies via X, I 
attempted to mount each /dev entry, wd1a - wd1p to /mnt/linux using:

mount -t ext2fs /dev/wd1X /mnt/linux

and /mnt/linux did exist.  for wd1a - wd1f I get 

mount_ext2fs: /dev/wd1X on /mnt/linux: Input/output error

And everything after that is not configured, so I'd assume a - f are the 
linux partitions.  What am I doing wrong or missing?  I read man mount and 
OpenBSD 2.9-current (GENERIC) #0: Sun Aug  5 15:57:49 CDT 2001
cpu0: AMD Athlon Model 4 (Thunderbird) ("AuthenticAMD" 686-class) 900 MHz
real mem  = 133738496 (130604K)
avail mem = 118906880 (116120K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(31) BIOS, date 03/21/01, BIOS32 rev. 0 @ 0xfb2a0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xb728
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdc80/144 (7 entries)
pcibios0: PCI Exclusive IRQs: 9 10 11 12
pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C596A PCI-ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8363 Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "VIA VT8363 PCI-AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "3DFX Interactive Banshee" rev 0x03
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "VIA VT82C686A PCI-ISA" rev 0x40
pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x06: ATA100, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 91080D5>
wd0: 16-sector PIO, LBA, 10300MB, 16383 cyl, 16 head, 63 sec, 21095424 sectors
wd1 at pciide0 channel 0 drive 1: <Maxtor 91000D5>
wd1: 16-sector PIO, LBA, 9541MB, 16383 cyl, 16 head, 63 sec, 19541088 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <CD-ROM, Drive/F5A, B1.5> SCSI0 5/cdrom removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <CREATIVE, CD-RW RW8435E, BC03> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x16: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 7 function 3 "VIA VT83C572 USB" rev 0x16: irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
"VIA VT82C686A SMBus" rev 0x40 at pci0 dev 7 function 4 not configured
auvia0 at pci0 dev 7 function 5 "VIA VT82C686A AC-97 Audio" rev 0x50: irq 10
ac97: codec id 0x83847600 (SigmaTel STAC9700)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
auvia0: warning: codec doesn't support hardware AC'97 2.0 Variable Rate Audio
audio0 at auvia0
vendor "LuxSonor", unknown product 0x1e (class multimedia, subclass video, rev 0x02) at pci0 dev 9 function 0 not configured
fxp0 at pci0 dev 10 function 0 "Intel 82557" rev 0x08: irq 10, address 00:03:47:09:ef:93
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
eap0 at pci0 dev 11 function 0 "Ensoniq AudioPCI" rev 0x01: irq 9
audio1 at eap0
de0 at pci0 dev 12 function 0 "DEC 21041" rev 0x21: irq 11
de0: Asante 21041 [10Mb/s] pass 2.1 address 00:00:94:98:a1:98
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
de0: enabling 10baseT port
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c240 netmask ce40 ttymask cec2
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
ums0 at uhub1 port 2 configuration 1 interface 0
ums0: Microsoft Microsoft IntelliMouse\M-. Explorer, rev 1.10/1.07, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
wsmouse0 at ums0 mux 0
pf: started
de0: abnormal interrupt: receive process stopped

# /dev/rwd1c:
type: ESDI
disk: wd1s1
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 255
sectors/cylinder: 16065
cylinders: 1027
total sectors: 16514064
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0		# microseconds
track-to-track seek: 0	# microseconds
drivedata: 0 

8 partitions:
#        size   offset    fstype   [fsize bsize   cpg]
  a:    65536        0    4.2BSD        0     0     0 	# (Cyl.    0 - 4*)
  b:   286384    65536      swap                      	# (Cyl.    4*- 21*)
  c: 16514064        0    unused        0     0       	# (Cyl.    0 - 1027*)
  e:    61440   351920    4.2BSD        0     0     0 	# (Cyl.   21*- 25*)
  f: 16100704   413360    4.2BSD        0     0     0 	# (Cyl.   25*- 1027*)