[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: D-link DFE-538TX not recongnized



Ah! Thanx, I forgot about that, it must be it.. I'll try it later
today..
Thanx!

JC

-----Original Message-----
From: owner-misc_(_at_)_openbsd_(_dot_)_org [mailto:owner-misc_(_at_)_openbsd_(_dot_)_org]On Behalf Of
Larry Moore
Sent: July 31, 2001 03:55
To: misc_(_at_)_openbsd_(_dot_)_org
Subject: Re: D-link DFE-538TX not recongnized
Importance: Low


Presumably after you made the change in /usr/src/sys/dev/pci you also
ran
"make" in this directory.
That will update pcidevs.h and pcidevs_data.h. You now have the updated
files which will be included in the new kernel you build.

Cheers,

Larry.

----- Original Message -----
From: "Jean-Christophe Sicard" <jc_sicard_(_at_)_bigfoot_(_dot_)_com>
To: <misc_(_at_)_openbsd_(_dot_)_org>
Sent: Tuesday, July 31, 2001 1:11 PM
Subject: D-link DFE-538TX not recongnized


> Hi,
>
> I have a D-link DFE-538TX nic which, according to the FAQ, is supposed
> to be supported by 2.9.  The default kernel did not recognize it,
> (unknown device id 0x1300).  I've seen that support to the Dlink
530TX+
> seems to have been added later (the nic is recognized as a 530TX) so I
> tried rebuilding my kernel with the latest versions (from cvs web) of
> files "pcidevs" and "rtl81x9reg.h" but the new kernel still doesnt
know
> the device id... What gives?
>
> What can I do to get it recognized correctly?
>
> Thanx
>
> dmesg follows:
>
> OpenBSD 2.9-stable (GENERIC) #3: Mon Jul 30 20:59:06 EDT 2001
>     root_(_at_)_sentry:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: F00F bug workaround installed
> cpu0: Intel Pentium/MMX ("GenuineIntel" 586-class) 234 MHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX
> real mem  = 66699264 (65136K)
> avail mem = 56918016 (55584K)
> using 839 buffers containing 3436544 bytes (3356K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(b7) BIOS, date 11/24/98, BIOS32 rev. 0 @
> 0xf04d0
> apm0 at bios0: Power Management spec V1.2 (BIOS mgmt disabled)
> apm0: AC on, battery charge unknown
> pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xaf2
> pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf0a80/112 (5 entries)
> pcibios0: PCI Interrupt Router at 000:01:0 ("Intel 82371FB PCI-ISA"
rev
> 0x00)
> pcibios0: PCI bus #0 is the last bus
> bios0: ROM list: 0xc0000/0x8000
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82439TX System" rev 0x01
> pcib0 at pci0 dev 1 function 0 "Intel 82371AB PIIX4 ISA" rev 0x01
> pciide0 at pci0 dev 1 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
> channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <NEC Corporation DSE2550A>
> wd0: 16-sector PIO, LBA, 2441MB, 4960 cyl, 16 head, 63 sec, 4999680
> sectors
> pciide0: channel 0 interrupting at irq 14
> wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
> pciide0: channel 1 ignored (disabled)
> uhci0 at pci0 dev 1 function 2 "Intel 82371AB USB" rev 0x01: irq 12
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> "Intel 82371AB Power Management" rev 0x01 at pci0 dev 1 function 3 not
> configured
> le1 at pci0 dev 10 function 0 "AMD 79c970 PCnet-PCI LANCE" rev 0x16
> le1: address 00:00:b4:50:be:ff
> le1: 8 receive buffers, 2 transmit buffers
> le1: interrupting at irq 10
> rl0 at pci0 dev 11 function 0 "D-Link Systems 530TX+" rev 0x10: irq 11
> address 00:50:ba:51:4c:75
>
> rl0: unknown device id: 1300
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard
> vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072
> wsdisplay0 at vga0: console (80x25, vt100 emulation), using wskbd0
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> sysbeep0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask 5040 netmask 5c40 ttymask 5cc2
> pctr: 586-class performance counters and user-level cycle counter
> enabled
> dkcsum: wd0 matched BIOS disk 80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
>
> ____________________________________________
> Jean-Christophe Sicard
> E-Mail: jc_sicard_(_at_)_bigfoot_(_dot_)_com



Visit your host, monkey.org