[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: dc0 not working.
- To: misc_(_at_)_openbsd_(_dot_)_org
- Subject: Re: dc0 not working.
- From: Henning Brauer <lists-openbsd_(_at_)_bsws_(_dot_)_de>
- Date: Wed, 27 Jun 2001 19:50:03 +0200
- Mail-followup-to: misc_(_at_)_openbsd_(_dot_)_org
On Wed, Jun 27, 2001 at 04:13:53PM +0000, Michael Lestinsky wrote:
> I have a machine running -stable from June 25th. One of the network-cards
> is 21143-based. It's working quite fine as de0. When I switch from
> de-driver to dc-driver this happens:
> (from dmesg:)
> OpenBSD 2.9-stable (MAGRATHEA) #0: Mon Jun 25 22:05:37 CEST 2001
> dc0 at pci0 dev 11 function 0 "DEC DECchip 21142/3" rev 0x41: irq 11
> address 00:00:cb:56:1a:96
> OUI 0x00057d model 0x0003 rev 0 at dc0 phy 5 not configured
> dcphy0 at dc0 phy 31: internal PHY
Hmm, odd. the OUI ... line suggests there is an unsupported PHY, the next
line says there is a dcphy.
> (from ifconfig -a:)
> dc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> media: Ethernet none (100baseTX)
> status: no carrier
> inet 192.168.1.2 netmask 0xffffff00 broadcast 192.168.1.255
ifconfig dc0 media 100BaseTX mediaopt full-duplex
for 100MBit/s full-duplex. man ifconfig for more.
* Henning Brauer, hostmaster_(_at_)_bsws_(_dot_)_de, http://www.bsws.de *
* Roedingsmarkt 14, 20459 Hamburg, Germany *
Unix is very simple, but it takes a genius to understand the simplicity.
Visit your host, monkey.org