[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

staroffice 5.2 freezes



Hello,

I've been tracking the various messages going back
and forth about staroffice working on obsd.  This is
something that I've been looking forward to, and 
do appreciate the work that has went into making
this happen.  I see that many people report success
with this, so I tried it myself, and got something
to go, but when I try to use it after I get the
installation to finish, the program routinely freezes
and then unfreezes for a few seconds and then freezes
for thirty seconds over and over again.  i was
wondering if anybody had any advice for me.   
Thanks in advance.

root_(_at_)_structure> mount
/dev/wd0a on / type ffs (local, softdep)
/dev/wd0d on /usr type ffs (local, noatime, read-only, softdep)
/dev/wd0e on /var type ffs (local, noatime, noexec, nosuid, softdep)
/dev/wd0f on /tmp type ffs (local, noatime, nosuid, softdep)
/dev/wd0g on /home type ffs (local, noatime, nodev, nosuid, softdep)
/dev/wd0h on /space type ffs (local, noatime, nodev, noexec, nosuid, read-only)
kernfs on /kern type kernfs (local)
procfs on /proc type procfs (local)
root_(_at_)_structure> pkg_info | grep redhat
redhat_base-6.2    linux compatibility package based on Redhat
rpm-3.0.6          redhat package manager
root_(_at_)_structure> uname -a
OpenBSD structure 2.9 GENERIC#653 i386
root_(_at_)_structure> dmesg
OpenBSD 2.9 (GENERIC) #653: Sat Apr 28 13:57:59 MDT 2001
    deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III (Coppermine) ("GenuineIntel" 686-class) 1 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD
real mem  = 536375296 (523804K)
avail mem = 492572672 (481028K)
using 5689 buffers containing 26923008 bytes (26292K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(5b) BIOS, date 02/26/01, BIOS32 rev. 0 @ 0xfd820
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xfd7b0/0x850
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdee0/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB PCI-ISA" rev 0x00)
pcibios0: PCI bus #6 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x1800 0xdc000/0x4000! 0xe0000/0x10000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "S3 Savage/IX-MV" rev 0x13
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
cbb0 at pci0 dev 2 function 0 "Texas Instruments PCI1450 PCI-CardBus" rev 0x03: irq 11
cbb1 at pci0 dev 2 function 1 "Texas Instruments PCI1450 PCI-CardBus" rev 0x03: irq 11
fxp0 at pci0 dev 3 function 0 "Intel 82557" rev 0x0c: irq 11, address 00:03:47:6d:c2:4c
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
vendor "AT&T/Lucent", unknown product 0x45c (class communications, subclass serial, rev 0x01) at pci0 dev 3 function 1 not configured
ppb1 at pci0 dev 4 function 0 vendor "Texas Instruments", unknown product 0xac22 rev 0x00
pci2 at ppb1 bus 4
pciide0 at pci2 dev 1 function 0 "CMD Technology PCI0648" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using irq 11 for native-PCI interrupt
cbb2 at pci2 dev 2 function 0 "Texas Instruments PCI1420 PCI-CardBus" rev 0x00: irq 11
cbb3 at pci2 dev 2 function 1 "Texas Instruments PCI1420 PCI-CardBus" rev 0x00: irq 11
cardslot0 at cbb2 slot 0 flags 0
cardbus0 at cardslot0: bus 5 device 0 cacheline 0x8, lattimer 0x80
pcmcia0 at cardslot0
cardslot1 at cbb3 slot 1 flags 0
cardbus1 at cardslot1: bus 6 device 0 cacheline 0x8, lattimer 0x80
pcmcia1 at cardslot1
clcs0 at pci0 dev 5 function 0 "Cirrus Logic CS4614" rev 0x01 irq 11
ac97: codec id 0x43525914
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Spatializer 3D
audio0 at clcs0
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide1 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide1 channel 0 drive 0: <IBM-DJSA-232>
wd0: 16-sector PIO, LBA, 30520MB, 16383 cyl, 15 head, 63 sec, 62506080 sectors
pciide1: channel 0 interrupting at irq 14
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Management" rev 0x03 at pci0 dev 7 function 3 not configured
cardslot2 at cbb0 slot 2 flags 0
cardbus2 at cardslot2: bus 2 device 0 cacheline 0x8, lattimer 0xb0
pcmcia2 at cardslot2
cardslot3 at cbb1 slot 3 flags 0
cardbus3 at cardslot3: bus 3 device 0 cacheline 0x8, lattimer 0xb0
pcmcia3 at cardslot3
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 4840 netmask 4840 ttymask 5842
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
uhub1 at uhub0 port 1
uhub1: Atmel product 0x3312, class 9/0, rev 1.10/3.00, addr 2
uhub1: 4 ports with 4 removable, self powered
uhub1: device problem, disabling port 1
uhub1: at uhub0 port 1 (addr 2) disconnected
uhub1 detached
ugen0 at uhub0 port 1
ugen0: Belkin Components product 0x0103, rev 1.10/2.05, addr 2
duplicate IP address 0.0.0.0 sent from ethernet address 00:20:a6:35:5e:b9

send



Visit your host, monkey.org