[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

-current hangs on A7V133



I installed OpenBSD 2.8 on my new computer (A7V133 motherboard, see
attached dmesg). Then I updated the source to -current and created
a new kernel (actually, three: GENERIC and two versions with fewer
devices etc). The boot process hangs after wd0 has been recognized,
i.e., after this:

wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 4 (using DMA data transfers)

The system has one harddrive (IBM) which is attached to the
Promise controller and one CD-ROM which is attached to the VIA IDE
controller (the latter is not recognized correctly and according
to some postings here doesn't work fully due to changes from
revision 'A' to 'B' of VT82C686). I disabled pcibios but that doesn't
help (as expected because 2.8 boots without problems and -current
doesn't give the error message
pcibios0: Warning, unable to fix up PCI interrupt routing)

Any proposals what to check/do next? Thanks!

2.8 works more or less ok (not much testing yet), but softupdates(?)
killed the machine while installing src.tar.gz on the machine
(interestingly enough the connection to another machine was
still ok).

OpenBSD 2.8 (GENERIC) #399: Mon Nov  6 10:59:23 MST 2000
    deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD K7 (Athlon) ("AuthenticAMD" 686-class) 1009 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem  = 267935744 (261656K)
avail mem = 243425280 (237720K)
using 3296 buffers containing 13500416 bytes (13184K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(c9) BIOS, date 01/10/01, BIOS32 rev. 0 @ 0xf0f50
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 found at 0xf0000[0x17d2]
pcibios0: PCI IRQ Routing Table rev. 1.0 found at 0xf1720, size 176 bytes (9 entries)
pcibios0: PCI Interrupt Router at 000:04:0 ("VIA VT82C686A (Apollo 133) PCI-ISA" rev 0x00)
pci_intr_fixup: no compatible PCI ICU found: ICU vendor 0x1106 product 0x0686
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #1 is the last bus
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8363 (Apollo 133) Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "VIA VT8363 (Apollo 133) PCI-AGP" rev 0x00
pci1 at ppb0 bus 1
"ATI Rage Pro" rev 0x5c at pci1 dev 0 function 0 not configured
pcib0 at pci0 dev 4 function 0 "VIA VT82C686A (Apollo 133) PCI-ISA" rev 0x40
pciide0 at pci0 dev 4 function 1 "VIA VT82C586A IDE" rev 0x06: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <ATAPI, 44X CDROM, 3.10> SCSI0 5/cdrom removable
cd0: can use 32-bit, PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: channel 1 interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
"VIA VT83C572 USB" rev 0x16 at pci0 dev 4 function 2 not configured
"VIA VT83C572 USB" rev 0x16 at pci0 dev 4 function 3 not configured
pchb1 at pci0 dev 4 function 4 "VIA VT82C686A (Apollo 133) SMBus" rev 0x40
sis0 at pci0 dev 10 function 0 "National Semiconductor DP83815 10/100" rev 0x00: irq 12 address 00:02:e3:02:47:ea
ukphy0 at sis0 phy 0: Generic IEEE 802.3u media interface
ukphy0: OUI 0x080017, model 0x0002, rev. 1
pciide1 at pci0 dev 17 function 0 "Promise Ultra100/ATA IDE(2)" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 10 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <IBM-DJNA-371350>
wd0: can use 32-bit, PIO mode 4, DMA mode 2, Ultra-DMA mode 4
wd0: 16-sector PIO, LBA, 12949MB, 16383 cyl, 16 head, 63 sec, 26520480 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 4 (using DMA data transfers)
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60/16 irq 1: vga 80 col, color, 8 scr, mf2-kbd
pms0: irq 12 already in use
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 8440 netmask 9440 ttymask 94c2
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302

Visit your host, monkey.org