[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Weird Zipdrive



I've got a DFI Pentium/450 mboard and just added a NEC Zip drive
as secondary master (there is no secondary slave).

It can read and write Zip disks okay -- its own. It cannot read disks
made by other machines of any file system. The disks it makes cannot
be read by another machine.

I have tried:

  1. Changing the Zip drive
  2. Changing Zip disks
  3. Different file systems
  4. Changing the IDE cable
  5. BIOS setting UDMA mode from AUTO to OFF
Any tips greatly appreciated. dmesg attached below (zipdrive is sd0(c)).

------------------

OpenBSD 2.8 (2.8) #5: Sat Mar  3 18:53:42 MST 2001
    root_(_at_)_koscej:/usr/kernel/2.8
cpu0: Intel Pentium III ("GenuineIntel" 686-class, 512KB L2 cache) 451 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD
real mem  = 133804032 (130668K)
avail mem = 120999936 (118164K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(48) BIOS, date 10/26/99, BIOS32 rev. 0 @ 0xfb340
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 found at 0xf0000[0xb7bc]
pcibios0: PCI BIOS has 6 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 10 11
pcibios0: PCI bus #1 is the last bus
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
"S3 Trio3 DX2" rev 0x02 at pci1 dev 0 function 0 not configured
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE (PIIX4)" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
atapiscsi0 at pciide0 channel 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 1 lun 0: <CREATIVE, CD5230E, 1.01> SCSI0 5/cdrom removable
cd0: can use 32-bit, PIO mode 4, DMA mode 2
wd0 at pciide0 channel 0 drive 0: <Maxtor 91366U4>
wd0: can use 32-bit, PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wd0: 16-sector PIO, LBA, 13029MB, 16383 cyl, 16 head, 63 sec, 26684784 sectors
pciide0: channel 0 interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
cd0(pciide0:0:1): using PIO mode 4, DMA mode 2 (using DMA data transfers)
atapiscsi1 at pciide0 channel 1
scsibus1 at atapiscsi1: 2 targets
sd0 at scsibus1 targ 0 lun 0: <IOMEGA, ZIP 100, 14.A> SCSI0 0/direct removable
sd0: drive offline
sd0: can use 32-bit, PIO mode 0
pciide0: channel 1 interrupting at irq 15
sd0(pciide0:1:0): using PIO mode 3
"Intel 82371AB USB (PIIX4)" rev 0x01 at pci0 dev 7 function 2 not configured
"Intel 82371AB Power Management (PIIX4)" rev 0x02 at pci0 dev 7 function 3 not configured
isa0 at pcib0
isadma0 at isa0
ne0 at isa0 port 0x240/32 irq 9
ne0: NE2000 Ethernet
ne0: address 00:80:ad:c9:ed:7c
sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v4.13
midi at sb0 not configured
audio0 at sb0
opl at sb0 not configured
opl0 at isa0 port 0x388/1638: model OPL3
midi0 at opl0: <Yamaha OPL3>
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60/16 irq 1: vga 80 col, color, 8 scr, mf2-kbd
pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c040 netmask c240 ttymask d2c2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
dkcsum: sd0 had no matching BIOS disk
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
IP Filter: already initialized
tun0: not multicast capable, IPv6 not enabled
tun0: not multicast capable, IPv6 not enabled

-- 
Jack J. Woehr                 # Ceterum censeo
PO Box 51, Golden, CO 80402   # in herbas belli
http://www.softwoehr.com      # ab idem desistamus.