[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Applixware 441


For some time trying to get Applixware for Linux version 441 to work 
using Linux emulation, with no succes yet. I have searched the 
repositories (with no luck in fixing my situation, but found several 
people are using it). If I install from cdrom, I get the error message 
that I do not have enough space available (it reports 0 bytes free... 
eventhough there is several GByte free).
If I copy the whole cdrom to harddisk and start up applix, I get error 
messages stating that I do not have the correct authorities (eventhough 
I run it as root). Since it was copied from cdrom, and Linux uses 
different groups etc, I have chgrp'ed and chown'ed the whole directory 
to root. Still no go: then it reports glibc error... 
Some info on my system: 2.8 stable (december 7th 2000). Linux emulation 
installed from ports tree (also dating December 7th), I have read the 
manual page, and made settings accordingly. (several Linux apps run on 
it, like acrobat reader etc)

Since I've asked for support in getting it to work before on this list, 
I have decided to make it somewhat more attractive: for my work I have 
a laptop, which runs NT. In order to be compatible with my colleagues 
in the offices, I need ppt, word and excel (yuk, I know, but it's like 
that). Also 1.2.x or 1.3 of Java is needed. (There is 1 application I 
need that does not run on Jdk 1.1.8: BEA weblogic, a java application 

Obviously: I want to get rid of having to use NT on this laptop, I 
would _very_ much like to use OpenBSD in stead ! 

Bottom line (in the spirit of this time of the year): who is able to 
fix this for me gets a bottle of fine champagne (Gosset, brut 
excellence: Gosset is the oldest Champage house in France, dating back 
1584). Also I will make a donation of $50 (USD) to the OpenBSD project. 
(which means that you help yourself in getting alcoholic in a very 
pleasant way, and on top of that the OpenBSD project  :-)

Happy New Year to you all, including your beloved ones !


PS: enclosed my dmesg output (just in case). This system (the whole 
system) has been build with CLAGS settings for pentiumpro. So don't pay 
attention to the 'generic' label in it please. (laptop is an IBM 390X, 
type 2626L0G)

OpenBSD 2.8-stable (GENERIC) #1: Wed Dec  6 12:35:41 CET 2000
cpu0: Intel Pentium III (Coppermine) ("GenuineIntel" 686-class) 448 MHz
real mem  = 200847360 (196140K)
avail mem = 181100544 (176856K)
using 2477 buffers containing 10145792 bytes (9908K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(ff) BIOS, date 11/27/99, BIOS32 rev. 0 @ 
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 98%
apm0: AC off, battery charge high, estimated 5:56 hours
pcibios0 at bios0: rev. 2.1 found at 0xfd7a0[0x860]
pcibios0: PCI IRQ Routing Table rev. 1.0 found at 0xfdf40, size 160 
bytes (8 entries)
pcibios0: PCI Interrupt Router at 000:02:0 ("Intel 82371FB (Triton) PCI
-ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
"Neomagic Magicgraph NM2200" rev 0x20 at pci1 dev 0 function 0 not 
pcib0 at pci0 dev 2 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 2 function 1 "Intel 82371AB IDE (PIIX4)" rev 0x01: 
DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IBM-DARA-218000>
wd0: can use 32-bit, PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wd0: 16-sector PIO, LBA, 17301MB, 16383 cyl, 16 head, 63 sec, 35433216 
pciide0: channel 0 interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data 
atapiscsi0 at pciide0 channel 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LG, CD-ROM CRN-8241B, 1.22> SCSI0 5/
cdrom removable
cd0: can use 32-bit, PIO mode 4, DMA mode 2
pciide0: channel 1 interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data 
"Intel 82371AB USB (PIIX4)" rev 0x01 at pci0 dev 2 function 2 not 
"Intel 82371AB Power Management (PIIX4)" rev 0x03 at pci0 dev 2 
function 3 not configured
cbb0 at pci0 dev 3 function 0 "Texas Instruments PCI1251B PCI-CardBus" 
rev 0x00
cbb1 at pci0 dev 3 function 1 "Texas Instruments PCI1251B PCI-CardBus" 
rev 0x00
"AT&T/Lucent Win Modem V.90" rev 0x01 at pci0 dev 6 function 0 not 
eso0 at pci0 dev 7 function 0 "ESS SOLO-1 AudioDrive" rev 0x02: ES1946 
rev E, irq 5
eso0: mapping Audio 1 DMA using VC I/O space at 0x10d0
audio0 at eso0
opl0 at eso0: model OPL3
midi0 at opl0: <ESO Yamaha OPL3>
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60/16 irq 1: vga 80 col, color, 8 scr, mf2-kbd
pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
cbb0: bad Vcc request. sock_ctrl 0x0, sock_status 0x30000b20
cbb0: irq 9
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
cbb1: irq 9
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x0, lattimer 0x20
pcmcia1 at cardslot1
biomask c240 netmask c240 ttymask d2c2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
cbb0: bad Vcc request. sock_ctrl 0x30, sock_status 0x30000b20
xl0 at cardbus0 dev 0 function 0: 3Com 3c575C-TX Ethernet: irq 9 
address 00:00:86:5f:0d:30
amphy0 at xl0 phy 0: Am79C873 10/100 media interface, rev. 0


Aernoudt Bottemanne          *      Powered by OpenBSD      *
http://www.bottemanne.net    *    http://www.openbsd.org    *

OpenBSD: secure by default

Visit your host, monkey.org