ne3 bandwith problem-dmesg

[Adalto Correia Filho <acorreia_(_at_)_proteus_(_dot_)_com_(_dot_)_br>]

Dearests,

    I forgot to include my dmesg on the previous message, and here it
goes. Sorry about that.

Thanks,

Adalto Correia

OpenBSD 2.7 (GENERIC) #25: Sat May 13 18:04:26 MDT 2000
    deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III (Coppermine) ("GenuineIntel" 686-class) 448 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD
real mem  = 133672960 (130540K)
avail mem = 119361536 (116564K)
using 1657 buffers containing 6787072 bytes (6628K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(63) BIOS, date 12/28/99
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 100%
apm0: AC off, battery charge high, estimated 1:57 minutes
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP (PAC)" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP (PAC)" rev 0x03
pci1 at ppb0 bus 1
"Trident CYBER 9525" rev 0x49 at pci1 dev 0 function 0 not configured
pcib0 at pci0 dev 5 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 5 function 1 "Intel 82371AB IDE (PIIX4)" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IBM-DARA-206000>
wd0: can use 32-bit, PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wd0: 16-sector PIO, LBA, 5729MB, 12416 cyl, 15 head, 63 sec, 11733120 sectors
pciide0: channel 0 interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
atapiscsi0 at pciide0 channel 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-C2302, 1315> SCSI0 5/cdrom removable
cd0: can use 32-bit, PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: channel 1 interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
"Intel 82371AB USB (PIIX4)" rev 0x01 at pci0 dev 5 function 2 not configured
"Intel 82371AB Power Management (PIIX4)" rev 0x03 at pci0 dev 5 function 3 not configured
vendor "AT&T/Lucent", unknown product 0x441 (class communications, subclass miscellaneous, rev 0x01) at pci0 dev 7 function 0 not configured
"Toshiba(2) ToPIC100 PCI-CardBus" rev 0x20 at pci0 dev 11 function 0 not configured
"Toshiba(2) ToPIC100 PCI-CardBus" rev 0x20 at pci0 dev 11 function 1 not configured
"ESS Maestro 2E" rev 0x10 at pci0 dev 12 function 0 not configured
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns8250, no fifo
vt0 at isa0 port 0x60/16 irq 1: vga 80 col, color, 8 scr, mf2-kbd
pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/65536
pcic0 controller 0: <Intel 82365SL rev 1> has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
ne3 at pcmcia1 function 0 "Linksys, EtherFast 10/100 PC Card (PCMPC100 V2), V2.0" port 0x340/16 irq 5
ne3: address 01:d4:ff:03:00:20
pcic0: irq 10
biomask c040 netmask c060 ttymask d4e2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302