Re: testing for 2.8

[Alf Breull <puma_(_at_)_hannover_(_dot_)_sgh-net_(_dot_)_de>]

Installation of v 2.8 from ftp://ftp.de.openbsd.org (Berlin), Oct 23,
(from an msdos slice) in an IBM Aptiva, P2-400, was without problems;
ethernet card was an RTL8019, working at ne3 (not ne1) = I was able to
connect to ftp.de.openbsd.org; dmesg is given below. Also, g77 run 
without problems ('g77 -o h1 h1.f sub1.f').

---
Additional information:
The disk geometry is (chs) 784,255,63, with msdos plus winnt at wd0i
and free space between (chs) 657,0,1 and 783,254,63 (996.2 MB).

>From earlier CD installations (2.6 and 2.7), I remembered OpenBSD being
not too happy when the last available cyl (783) was included in fdisk,
so, again, just the space between (chs) 657,0,1 and 782,254,63 was used.

This IBM ('designed for win98 and winnt') didn't allow linux (SUSE 6.4,
yast 1 and 2, and redhat 6.1) to run installation tools (screen froze).
---

Alf


--- dmesg (IBM Aptiva, P2-400) ----

OpenBSD 2.8 (GENERIC) #366: Sat Oct 21 07:21:01 MDT 2000

deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel
Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 398 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,
FXSR
real mem  = 66629632 (65068K)
avail mem = 56770560 (55440K)
using 838
buffers containing 3432448 bytes (3352K) of memory
mainbus0 (root)
bios0 at
mainbus0: AT/286+(00) BIOS, date 10/15/98, BIOS32 rev. 0 @ 0xfdb70
apm0 at
bios0: Power Management spec V1.2
apm0: AC on, battery charge
unknown
pcibios0 at bios0: rev. 2.1 found at 0xf0000[0x10000]
pcibios0: PCI
IRQ Routing Table rev. 1.0 found at 0xf6e10, size 176 bytes (9
entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB
(Triton) PCI-ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
pci0 at
mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel
82443BX PCI-AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP"
rev 0x03
pci1 at ppb0 bus 1
"NVidia/SGS-Thomson Velocity128" rev 0x22 at
pci1 dev 0 function 0 not configured
pcib0 at pci0 dev 7 function 0 "Intel
82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB
IDE (PIIX4)" rev 0x01: DMA, channel 0 wired to compatibility, channel 1
wired to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC
AC26400B>
wd0: can use 32-bit, PIO mode 4, DMA mode 2, Ultra-DMA mode
2
wd0: 16-sector PIO, LBA, 6149MB, 13328 cyl, 15 head, 63 sec, 12594960
sectors
pciide0: channel 0 interrupting at irq 14
wd0(pciide0:0:0): using
PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
atapiscsi0 at
pciide0 channel 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0
lun 0: <TEAC, CD-532E-A, 1.0A> SCSI0 5/cdrom removable
cd0: can use 32-bit,
PIO mode 4, DMA mode 2
pciide0: channel 1 interrupting at irq
15
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data
transfers)
"Intel 82371AB USB (PIIX4)" rev 0x01 at pci0 dev 7 function 2
not configured
"Intel 82371AB Power Management (PIIX4)" rev 0x02 at pci0
dev 7 function 3 not configured
eap0 at pci0 dev 12 function 0 "Ensoniq
AudioPCI97" rev 0x04: irq 9
ac97: codec id 0x43525903 (Cirrus Logic
CS4297)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, No 3D
Stereo
audio0 at eap0
isa0 at pcib0
isadma0 at isa0
ne1 at isa0 port
0x300/32 irq 10
ne1: NE2000 (RTL8019) Ethernet
ne1: address
00:00:1c:52:b6:dd
eg0: can't map I/O space
pcppi0 at isa0 port 0x61
midi0
at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq
7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8
irq 4: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60/16 irq 1: vga 80 col,
color, 8 scr, mf2-kbd
pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0/6 irq 6
drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
isapnp0 at isa0
port 0x279: read port 0x20b
ne3 at isapnp0 "Realtek Plug & Play Ethernet
Ca, @@@1980, PNP80D6, " port 0x220/32 irq 3
ne3: NE2000 (RTL8019)
Ethernet
ne3: address 00:00:1c:52:b6:dd
biomask c040 netmask c448 ttymask
d4ca
pctr: 686-class user-level performance counters enabled
mtrr: Pentium
Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0
rrootdev=0x300 rawdev=0x302