Question about modem setup

[Ming-Ray Liao <ray_(_at_)_liaofamily_(_dot_)_org>]

Hi,
I have a question regarding setting up a PCI modem in openBSD.
It is not a winmodem. It is manufactured by 3Com USR, called
PCI Fax Modem. It runs under linux without the need of special
software. But I have problem setting it up under openBSD using
generic kernel. I don't know if the kernel detected it or not? and
if detected, where is it assignment to?

I looked at the dmesg output, and there is a suspicious looking output
>>unknown vendor 0x12b9 product 0x1008 (class communications,
>>subclass serial, rev 0x01) at pci0 dev 13 function 0 not configured
Is this my modem?
I checked on the mailing list archive, there are a few people who
experienced similar problem setting up their modem. But I didn't
find any solution to it :-(

Here is the output from dmesg:
-----------------------------------------------------
OpenBSD 2.7 (GENERIC) #25: Sat May 13 18:04:26 MDT 2000
  deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II (Klamath) ("GenuineIntel" 686-class, 512KB L2 
cache) 267 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,MMX
real mem  = 133804032 (130668K)
avail mem = 119488512 (116688K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(b5) BIOS, date 09/16/97
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443LX PCI-AGP (PAC)" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443LX AGP (PAC)" rev 0x03
pci1 at ppb0 bus 1
"Matrox MGA Millennium II 2164WA-B AGP" rev 0x00 at pci1 dev 0 function 
0 not configured
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x01
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE (PIIX4)" rev 0x01: 
DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD136AA-35BAA0>
wd0: can use 32-bit, PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wd0: 16-sector PIO, LBA, 12971MB, 16383 cyl, 16 head, 63 sec, 26564832 
sectors
pciide0: channel 0 interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data 
transfers)
atapiscsi0 at pciide0 channel 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, CD-ROM XM-6102B, 1106> SCSI0 
5/cdrom removable
sd0 at scsibus0 targ 1 lun 0: <IOMEGA, ZIP 100, 23.D> SCSI0 0/direct 
removable
sd0: drive offline
cd0: can use 32-bit, PIO mode 3, DMA mode 2
sd0: can use 32-bit, PIO mode 0
pciide0: channel 1 interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 0, DMA mode 2 (using DMA data transfers)
sd0(pciide0:1:1): using PIO mode 3
"Intel 82371AB USB (PIIX4)" rev 0x01 at pci0 dev 7 function 2 not configured
"Intel 82371AB Power Management (PIIX4)" rev 0x01 at pci0 dev 7 function 
3 not configured
unknown vendor 0x12b9 product 0x1008 (class communications, subclass 
serial, rev 0x01) at pci0 dev 13 function 0 not configured
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
vt0 at isa0 port 0x60/16 irq 1: vga 80 col, color, 8 scr, mf2-kbd
pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
isapnp0 at isa0 port 0x279: read port 0x203
isapnp0: No current device for tag, card 1
sb1 at isapnp0 "Creative AWE64 PnP, CTL0045, , Audio" port 
0x220/16,0x330/2,0x388/4 irq 5 drq 1,5: dsp v4.16
midi1 at sb1: <SB MPU-401 UART>
audio0 at sb1
opl0 at sb1: model OPL3
midi2 at opl0: <SB Yamaha OPL3>
joy0 at isapnp0 "Creative AWE64 PnP, CTL7002, PNPB02F, Game" port 0x200/8
"Creative AWE64 PnP, CTL0022, , WaveTable" at isapnp0 port 0x620/4 not 
configured
biomask c040 netmask c040 ttymask d042
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
------------------------------------------------------------------

Thanks for helping,

Ming