[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

cardbus/ne3



I recently purchased a new laptop with cardbus support "Texas Instruments
PCI1211 PCI-CardBus".. I'm using a generic pcmcia card that shows up as
ne3 "Network Everywhere, Fast Ethernet 10/100 PC Card, 2.0".  Here's the
problem:

With floppyC28.fs, the cardbus device is detected and it sees and
configures my ne3 card, but I get device timeouts when using the network
card (dhclient, ifconfig, etc..)

I did have it working at one point today, when I tried an older
2.7-current ramdiskB I had lying around.. unfortunately I didn't realize
I'd have problems with 2.8-beta, so I've since formatted it.. hence I have
no idea what date it was..

I also tried another generic ne3 pcmcia card I have and got the same
device timeouts with it..


Does anyone have any ideas?

Thanks in Advance, (dmesg follows)
--Bob 

OpenBSD 2.8-beta (RAMDISKC) #35: Sun Sep 17 15:44:13 MDT 2000
    deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/RAMDISKC
cpu0: AMD K6-2 ("AuthenticAMD" 586-class) 473 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX
real mem  = 28880896 (28204K)
avail mem = 22925312 (22388K)
using 378 buffers containing 1548288 bytes (1512K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(12) BIOS, date 01/14/00, BIOS32 rev. 0 @
0xfd720
apm0 at bios0: Power Management spec V1.2
pcibios0 at bios0: rev. 2.1 found at 0xfd83e
pcibios0: PCI IRQ Routing Table rev. 1.0 found at 0xfdf70, size 112 bytes
(5 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C596A (Apollo
Pro) PCI-ISA" rev 0x00)
pci_intr_fixup: no compatible PCI ICU found: ICU vendor 0x1106 product
0x0686
pcibios0: PCI bus #2 is the last bus
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 vendor "VIA", unknown product 0x501 rev
0x03
ppb0 at pci0 dev 1 function 0 vendor "VIA", unknown product 0x8501 rev
0x00
pci1 at ppb0 bus 1
vendor "Trident", unknown product 0x8420 (class display, subclass VGA, rev
0x5c) at pci1 dev 0 function 0 not configured
"VIA VT82C686A (Apollo 133) PCI-ISA" rev 0x19 at pci0 dev 7 function 0 not
configured
pciide0 at pci0 dev 7 function 1 "VIA VT82C586A IDE" rev 0x06: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <IBM-DARA-206000>
wd0: can use 32-bit, PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wd0: 16-sector PIO, LBA, 5729MB, 12416 cyl, 15 head, 63 sec, 11733120
sectors
pciide0: channel 0 interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data
transfers)
atapiscsi0 at pciide0 channel 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, CD-ROM XM-1902B, 1014> SCSI0
5/cdrom removable
cd0: can use 32-bit, PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: channel 1 interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data
transfers)
"VIA VT83C572 USB" rev 0x0a at pci0 dev 7 function 2 not configured
"VIA VT82C686A (Apollo 133) SMBus" rev 0x20 at pci0 dev 7 function 4 not
configured
"VIA VT82C686A (Apollo 133) AC-97 Audio" rev 0x21 at pci0 dev 7 function 5
not configured
"AT&T/Lucent LTMODEM" rev 0x01 at pci0 dev 9 function 0 not configured
cbb0 at pci0 dev 10 function 0 "Texas Instruments PCI1211 PCI-CardBus" rev
0x00: irq 9
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
isa0 at mainbus0
isadma0 at isa0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60/16 irq 1: vga 80 col, color, 8 scr, mf2-kbd
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c240 netmask c240 ttymask c242
rd0: fixed, 3560 blocks
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
ne3 at pcmcia0 function 0 "Network Everywhere, Fast Ethernet 10/100 PC
Card, 2.0" port 0x1840/16
ne3: address 00:e0:98:86:ee:b6