Unknown CMOS layout

[petr_(_dot_)_sajtos_(_at_)_ct_(_dot_)_cz]

Hi all,

I have installed OpenBSD 2.7. Every time I reboot the computer I get
"clock: unknown CMOS layout". Can someone help me?

Thanks,
Petr


dmesg output:

OpenBSD 2.7 (GENERIC) #25: Sat May 13 18:04:26 MDT 2000
    deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II (Celeron) ("GenuineIntel" 686-class, 128KB L2
cache) 488 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,F
XSR
real mem  = 133738496 (130604K)
avail mem = 119422976 (116624K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(84) BIOS, date 08/02/99
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP (PAC)" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP (PAC)" rev 0x03
pci1 at ppb0 bus 1
"Nvidia Riva TNT2" rev 0x15 at pci1 dev 0 function 0 not configured
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE (PIIX4)" rev 0x01:
DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST320423A>
wd0: can use 32-bit, PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wd0: 32-sector PIO, LBA, 19536MB, 16383 cyl, 16 head, 63 sec, 40011300
sectors
wd1 at pciide0 channel 0 drive 1: <QUANTUM FIREBALL EL5.1A>
wd1: can use 32-bit, PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wd1: 16-sector PIO, LBA, 4892MB, 10602 cyl, 15 head, 63 sec, 10018890
sectors
pciide0: channel 0 interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data
transfers)
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (using DMA data
transfers)
atapiscsi0 at pciide0 channel 1
scsibus0 at atapiscsi0: 2 targets
probe(atapiscsi0:0:0): Check Condition on opcode 0
    SENSE KEY: Aborted Command
cd0 at scsibus0 targ 0 lun 0: <ATAPI, CD-ROM DRIVE-40X, T0BP> SCSI0
5/cdrom removable
sd0 at scsibus0 targ 1 lun 0: <IOMEGA, ZIP 100, 14.A> SCSI0 0/direct
removable
sd0: drive offline
cd0: can use 32-bit, PIO mode 3, DMA mode 2, Ultra-DMA mode 2
sd0: can use 32-bit, PIO mode 0
pciide0: channel 1 interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 3, Ultra-DMA mode 2 (using DMA data
transfers)
sd0(pciide0:1:1): using PIO mode 3
"Intel 82371AB USB (PIIX4)" rev 0x01 at pci0 dev 7 function 2 not
configured
"Intel 82371AB Power Management (PIIX4)" rev 0x02 at pci0 dev 7 function
3 not configured
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60/16 irq 1: vga 80 col, color, 8 scr, mf2-kbd
pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
isapnp0 at isa0 port 0x279: read port 0x203
sb1 at isapnp0 "Creative ViBRA16X PnP, CTL0043, , Audio" port
0x220/16,0x330/2,0x388/4 irq 5 drq 1,3: dsp v4.16
midi1 at sb1: <SB MPU-401 UART>
audio0 at sb1
opl0 at sb1: model OPL3
midi2 at opl0: <SB Yamaha OPL3>
joy0 at isapnp0 "Creative ViBRA16X PnP, CTL7005, PNPB02F, Game" port
0x201/1
biomask c040 netmask c040 ttymask d0c2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
wd1: no disk label
dkcsum: wd1 matched BIOS disk 81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
clock: unknown CMOS layout