[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

pcmcia megahertz cc10bt



Hi
I have OpenBSD installed on a IBM Thinkpad 390e
I'm trying to use a Megahertz cc10BT pcmcia card.

This card is recognized at boot up and uses the sm0 interface,
and the little internal light
comes on, but on hub, where its plugged in the corresponding led
does not light up.

Any idea on how I can this working 
thanks 
steve

here's my dmesg:

 iospace 0-1f; rdybsy_active wp_active bvd_active io8 io16 irqlevel
sm0 at pcmcia1 function 0 "Megahertz, CC10BT/2, PCMCIA 10BASE-T/2
ETHERNET ADAPTER" port 0x340/16 irq 3: addre
ss 00:00:86:16:e9:f6, utp/aui (default utp)
sm0 detached
syncing disks... done
rebooting...
OpenBSD 2.6 (BEELZEBUB) #0: Wed Feb  9 14:11:11 PST 2000
    steve_(_at_)_beelzebub:/usr/src/sys/arch/i386/compile/BEELZEBUB
cpu0: Intel Pentium II (Celeron) ("GenuineIntel" 686-class, 256KB L2
cache) 299 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
BIOS mem  = 654336 conventional, 200212480 extended
real mem  = 200867840
avail mem = 183115776
using 2477 buffers containing 10145792 bytes of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(34) BIOS, date 05/04/99
bios0: diskinfo 0xe055400c cksumlen 1 memmap 0xe0554088 apminfo
0xe0554148
apm0 at bios0: Power Management spec V1.1
apm0: battery life expectancy 96%
apm0: AC on, battery charge high
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP (PAC)" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP (PAC)" rev 0x03
pci1 at ppb0 bus 1
vendor "Neomagic", unknown product 0x5 (class display, subclass VGA, rev
0x20) at pci1 dev 0 function 0 not co
nfigured
pcib0 at pci0 dev 2 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 2 function 1 "Intel 82371AB IDE (PIIX4)" rev 0x01:
DMA, channel 0 wired to compatibility, 
channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IBM-DKLA-24320>
wd0: can use 32-bit, PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wd0: 16-sector PIO, LBA, 4126MB, 8944 cyl, 15 head, 63 sec, 8452080
sectors
pciide0: channel 0 interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data
transfers)
atapiscsi0 at pciide0 channel 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LG, CD-ROM CRN-8241B, 1.16> SCSI0 5/cdrom
removable
cd0: can use 32-bit, PIO mode 4, DMA mode 2
pciide0: channel 1 interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data
transfers)
"Intel 82371AB USB (PIIX4)" rev 0x01 at pci0 dev 2 function 2 not
configured
"Intel 82371AB Power Management (PIIX4)" rev 0x02 at pci0 dev 2 function
3 not configured
"Texas Instruments PCI1251 PCI-CardBus" rev 0x01 at pci0 dev 3 function
0 not configured
"Texas Instruments PCI1251 PCI-CardBus" rev 0x01 at pci0 dev 3 function
1 not configured
vendor "AT&T/Lucent", unknown product 0x449 (class communications,
subclass miscellaneous, rev 0x01) at pci0 d
ev 6 function 0 not configured
"ESS SOLO-1 AudioDrive" rev 0x02 at pci0 dev 7 function 0 not configured
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
npx0 at isa0 port 0xf0/16: using exception 16
vt0 at isa0 port 0x60/16 irq 1: generic VGA, 80 col, color, 8 scr,
mf2-kbd
pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/16384
pcic0 controller 0: <Intel 82365SL rev 2> has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia0: CIS version PCMCIA 2.0 or 2.1
pcmcia0: CIS info: Megahertz, CC10BT/2, PCMCIA 10BASE-T/2 ETHERNET
ADAPTER, 00008616E9F6
pcmcia0: Manufacturer code 0x128, product 0x103
pcmcia0: function 0: network adapter, ccr addr 300 mask 1
pcmcia0: function 0, config table entry 1: I/O card; irq mask ffff;
iomask 4, iospace 0-f; rdybsy_active wp_ac
tive bvd_active io8 io16 irqlevel
pcmcia0: function 0, config table entry 3: I/O card; irq mask ffff;
iomask 5, iospace 0-1f; rdybsy_active wp_a
ctive bvd_active io8 io16 irqlevel
sm0 at pcmcia0 function 0 "Megahertz, CC10BT/2, PCMCIA 10BASE-T/2
ETHERNET ADAPTER" port 0x340/16 irq 3: addre
ss 00:00:86:16:e9:f6, utp/aui (default utp)
pcmcia1 at pcic0 controller 0 socket 1
pcic0: irq 4
biomask c040 netmask c048 ttymask d05a
pctr: 686-class user-level performance counters enabled
dkcsum: wd0 matched BIOS disk 80
rootdev=0x0 rrootdev=0x300 rawdev=0x302