X Fatal Error: OpenBSD 2.4, XFree86 3.3.3.1, and Diamond Stealth II S22

[Phillip Lenhardt <philen_(_at_)_ans_(_dot_)_net>]

Earlier today I had 2.3 with the 3.3.3.1 svga server and everything worked fine.
After upgrading to 2.4, I get a fatal error on starting the X server. Any help
in resolving this would be appreciated.

Running startx, I get this error (below it is my dmesg):

XFree86 Version 3.3.3.1 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: December 29 1998
	If the server is older than 6-12 months, or if your card is newer
	than the above date, look for a newer version before reporting
	problems.  (see http://www.XFree86.Org/FAQ)
Operating System: OpenBSD 2.4 i386 
Configured drivers:
  SVGA: server for SVGA graphics adaptors (Patchlevel 0):
      NV1, STG2000, RIVA128, RIVATNT, ET4000, ET4000W32, ET4000W32i,
      ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a,
      ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100,
      et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33,
      gvga, ati, sis86c201, sis86c202, sis86c205, sis86c215, sis86c225,
      sis5597, sis5598, sis6326, tvga8200lx, tvga8800cs, tvga8900b,
      tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b,
      tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi,
      tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, tgui9685,
      cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, 3dimage975,
      3dimage985, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428,
      clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462,
      clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541,
      clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e,
      cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200,
      mgag100, oti067, oti077, oti087, oti037c, al2101, ali2228, ali2301,
      ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7,
      ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek, s3_virge,
      AP6422, AT24, AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160,
      NM2200, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546,
      ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200,
      ct64300, mediagx, V1000, V2x00, p9100, spc8110, generic
Using pcvt driver (version 3.32)
XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keymap: "xfree86(us)" (overrides other XKB settings)
(**) Mouse: type: Microsoft, device: /dev/tty00, baudrate: 1200
(**) Mouse: buttons: 3, 3 button emulation (timeout: 50ms)
(**) SVGA: Graphics device ID: "MyCard2"
(**) SVGA: Monitor ID: "My Monitor"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(--) SVGA: PCI: Rendition Verite 2x00 rev 6, Memory @ 0xe4000000, 0xe5000000, I/O @ 0x6500

Fatal server error:
xf86MapVidMem: Address 0xe4000000 outside allowable range


When reporting a problem related to a server crash, please send
the full server output, not just the last messages

X connection to :0.0 broken (explicit kill or server shutdown).

--

OpenBSD 2.4 (GENERIC) #56: Thu Oct 22 01:26:52 MDT 1998
    deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II ("GenuineIntel" 686-class) 234 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,MMX
BIOS mem  = 654336 conventional, 66060288 extended
real mem  = 66715648
avail mem = 58933248
using 840 buffers containing 3440640 bytes of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(0d) BIOS, date 11/03/97
bios0: apminfo 0xf046a00c diskinfo 0xf046a034 cksumlen 1 memmap 0xf046a0b0
apm0 at bios0: Power Management spec V1.1
apm0: AC on, no battery
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443LX PCI AGP Controller (PAC)" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443LX AGP Device (PAC)" rev 0x03
pci1 at ppb0 bus 1
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA Bridge" rev 0x01
"Intel 82371AB IDE controller (PIIX4)" rev 0x01 at pci0 dev 7 function 1 not configured
"Intel 82371AB USB Host Controller (PIIX4)" rev 0x01 at pci0 dev 7 function 2 not configured
"Intel 82371AB Power Management Controller (PIIX4)" rev 0x01 at pci0 dev 7 function 3 not configured
vendor "Synema", unknown product 0x2000 (class display, subclass VGA, rev 0x06) at pci0 dev 11 function 0 not configured
ne2 at pci0 dev 13 function 0 "Realtek Semi 8029" rev 0x00
ne2: Ethernet address 00:40:05:58:e9:00
ne2: irq 11
isa0 at mainbus0
lpt0 at isa0 port 0x378-0x37b irq 7
isadma0 at isa0
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
atapibus0 at wdc0
acd0 at atapibus0 drive 1: <CD-ROM 36X/AKU, U21I> ATAPI 5/cdrom removable
wd0 at wdc0 drive 0: <FUJITSU MPB3021ATU>
wd0: 2062MB, 4470 cyl, 15 head, 63 sec, 512 bytes/sec, 4224150 sec total
wd0: using 16-sector 16-bit pio transfers, lba addressing
npx0 at isa0 port 0xf0-0xff: using exception 16
pccom0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60-0x6f irq 1: generic VGA, 80 col, color, 8 scr, mf2-kbd
pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0-0x3f5 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 4040 netmask 4840 ttymask 58c2
root on wd0a
pctr: 686-class user-level performance counters enabled
dkcsum: wd0 matched BIOS disk 80
rootdev=0x0 rrootdev=0x300 rawdev=0x302

-- 
In the long run, we are all dead. -JMK                          philen_(_at_)_ans_(_dot_)_net