[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

i386; PS/2 mouse port, intellipoint



I'm using a M$ Intellipoint mouse on i386, with the XFree86 from the Apr
10th/11th i386 snapshot.  The X server works fine with pms0 as the ps2 port,
but I don't seem to be able to use the middle wheel as a button.  I've tried
the intellipoint protocol but it does not work, nor does the microsoft
protocol... Mousesystems works, so I use it, but does anyone know of a better
way to do this?

OpenBSD 2.3 (NMEDIA) #0: Tue Apr 14 10:29:14 PDT 1998
    chris_(_at_)_mimosa:/usr/src/sys/arch/i386/compile/NMEDIA
cpu0: Intel Pentium (P54C) ("GenuineIntel" 586-class) 167 MHz
cpu0: F00F bug workaround installed
BIOS mem  = 654336 conventional, 99614720 extended
real mem  = 100270080
avail mem = 91578368
using 1249 buffers containing 5115904 bytes of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(8c) BIOS, date 11/28/97
bios0: pciinfo 0xf030300c apminfo 0xf0303028 diskinfo 0xf0303050 cksumlen 1
memm
ap 0xf03030cc
apm0 at bios0: Power Management spec V1.1
apm0: AC on, battery charge [no battery]
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82439TX System Controller (MTXC)" rev
0x01
"Intel 82371AB PIIX4 ISA Bridge" rev 0x01 at pci0 dev 7 function 0 not
configure
d
fxp0 at pci0 dev 14 function 0 "Intel 82557 Fast Ethernet LAN Controller" rev
0x
04: Ethernet address 00:a0:c9:92:f3:9f, irq 5
"Cirrus Logic CL-GD5434-8" rev 0x8e at pci0 dev 15 function 0 not configured
ahc0 at pci0 dev 16 function 0 "Adaptec AHA-2940 Ultra" rev 0x00: irq 10
ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs
scsibus0 at ahc0: 16 targets
ahc0: target 2 synchronous at 10.0MHz, offset = 0xf
sd0 at scsibus0 targ 2 lun 0: <DEC, DSP5400S, 427L> SCSI2 0/direct fixed
sd0: 3814MB, 3055 cyl, 26 head, 98 sec, 512 bytes/sec, 7812870 sec total
isa0 at mainbus0
lpt0 at isa0 port 0x378-0x37b irq 7
isadma0 at isa0
npx0 at isa0 port 0xf0-0xff: using exception 16
pccom0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60-0x6f irq 1: CL-GD5430, 80/132 col, color, 8 scr, 
mf2-kbd
pms0 at vt0 irq 12
spkr0 at vt0 port 0x61
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 440 netmask 460 ttymask 14e2
root on sd0a
pctr: Pentium performance counters and user-level cycle counter enabled
dkcsum: sd0 matched BIOS disk 80
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02