3.9 PCI Panic

[Benjamin PAGES <bpages_(_at_)_t-systems_(_dot_)_fr>]

Hi, I'm having a "panic" while booting my server.

The installation process works fine, but once the installation is over, 
the boot process ends with a "Panic".
FYI I've included the DMESG from the install floppy at the end of the 
message and the PCI Table given from the bios at the boot.

>> OpenBSD/i386 BOOT 2.10
boot>
booting hd0a:/bsd: 4965736+867880 [52+256080+237351]=0x608cb0
entry point at 0x200120*
[ using 493856 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2006 OpenBSD. All rights reserved. 
http://www.OpenBSD.org

OpenBSD 3.9-current (GENERIC) #652: Wed Mar 22 15:14:13 MST 2006
    deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16
real mem  = 1072144384 (1047016K)
avail mem = 971591680 (948820K)
using 4278 buffers containing 53710848 bytes (52452K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(d2) BIOS, date 11/28/05, BIOS32 rev. 0 @ 0xf9710
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 3.0 @ 0xf0000/0xc894
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc730/352 (20 entries)
pcibios0: PCI Exclusive IRQs: 5 6 10 11
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 6300ESB LPC" rev 0x00)
pcibios0: PCI bus #10 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7520 MCH" rev 0x0c
"Intel E7520 MCH ERR" rev 0x0c at pci0 dev 0 function 1 not configured
"Intel E7520 MCH DMA" rev 0x0c at pci0 dev 1 function 0 not configured
ppb0 at pci0 dev 2 function 0 "Intel MCH PCIE" rev 0x0c
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel PRO/1000 PT (82571EB)" rev 
0x06extent_alloc_
region: extent `ioport' (0x0 - 0xffff)
extent_alloc_region: start 0x30007000, end 0x3000701f
panic: extent_alloc_region: region lies outside extent
Stopped at      Debugger+0x4:   leave
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb> trace
Debugger(d06a6664,20000,d080ba78,3000701f,30007000) at Debugger+0x4
panic(d061a0c0,30007000,3000701f,ffff,30007001) at panic+0x63
extent_alloc_region(d06d8d40,30007000,20,10) at extent_alloc_region+0x68
bus_space_map(0,30007000,20,0,d080bb0c,d080bb14,d080bb18,d188db74) at 
bus_space
_map+0x46
pci_mapreg_map(d188db30,18,1,0,d188db74,d188db70,d188db7c,d188db78,0,80010000,1
8,df520000) at pci_mapreg_map+0x73
em_allocate_pci_resources(d188d800,d04ca890,d188d800,d03266b3) at 
em_allocate_p
ci_resources+0xd6
em_attach(d188bd80,d188d800,d080bc20,0,80010000) at em_attach+0x117
config_attach(d188bd80,d069f8bc,d080bc20,d046c924) at config_attach+0xef
pci_probe_device(d188bd80,80010000,0,0,0) at pci_probe_device+0x135
pci_enumerate_bus(d188bd80,0,0,0,d06a6664) at pci_enumerate_bus+0xef
config_attach(d188af40,d069f028,d080bd00,d04af3d0,d066d764) at 
config_attach+0x
ef
ppbattach(d188be80,d188af40,d080bda0,0,80001000) at ppbattach+0x9c
config_attach(d188be80,d069f658,d080bda0,d046c924) at config_attach+0xef
pci_probe_device(d188be80,80001000,0,0,0) at pci_probe_device+0x135
pci_enumerate_bus(d188be80,0,0,0,d0611855) at pci_enumerate_bus+0xef
config_attach(d188afc0,d069f028,d080bea0,d046c6b4) at config_attach+0xef
mainbus_attach(0,d188afc0,0,0,d080bf10) at mainbus_attach+0x1ce
config_attach(0,d069f004,0,0,d06e1920) at config_attach+0xef
config_rootfound(d063837c,0,d080bf58,d0442808) at config_rootfound+0x27
cpu_configure(0,1,3,0,3fee0000) at cpu_configure+0x1f
main(0,0,0,0,0) at main+0x34c
ddb>
Debugger(d06a6664,20000,d080ba78,3000701f,30007000) at Debugger+0x4
ddb> ps
   PID   PPID   PGRP    UID  S       FLAGS  WAIT       COMMAND
*    0     -1      0      0  7     0x80204             swapper
ddb>

Here is the DMESG from the install floppy:
# dmesg
OpenBSD 3.9 (RAMDISK) #1027: Thu Mar  2 02:47:13 MST 2006
    deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/RAMDISK
cpu0: Intel(R) Xeon(TM) CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,CNXT-ID
real mem  = 1072144384 (1047016K)
avail mem = 974409728 (951572K)
using 4278 buffers containing 53710848 bytes (52452K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(d2) BIOS, date 11/28/05, BIOS32 rev. 0 @ 0xf9710
apm0 at bios0: Power Management spec V1.2
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 3.0 @ 0xf0000/0xc894
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc730/352 (20 entries)
pcibios0: PCI Exclusive IRQs: 5 6 10 11
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 6300ESB LPC" rev 0x00)
pcibios0: PCI bus #10 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7520 MCH" rev 0x0c
"Intel E7520 MCH ERR" rev 0x0c at pci0 dev 0 function 1 not configured
"Intel E7520 MCH DMA" rev 0x0c at pci0 dev 1 function 0 not configured
ppb0 at pci0 dev 2 function 0 "Intel MCH PCIE" rev 0x0c
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel PRO/1000 PT (82571EB)" rev 0x06: 
can't find
io space
em0: Allocation of PCI resources failed
em1 at pci1 dev 0 function 1 "Intel PRO/1000 PT (82571EB)" rev 0x06: irq 
11, add
ress 00:10:f3:0a:4f:cb
ppb1 at pci0 dev 3 function 0 "Intel MCH PCIE" rev 0x0c
pci2 at ppb1 bus 2
em2 at pci2 dev 0 function 0 "Intel PRO/1000 PT (82571EB)" rev 0x06: irq 
10, add
ress 00:10:f3:0a:4f:cc
em3 at pci2 dev 0 function 1 "Intel PRO/1000 PT (82571EB)" rev 0x06: irq 
11, add
ress 00:10:f3:0a:4f:cd
ppb2 at pci0 dev 4 function 0 "Intel MCH PCIE" rev 0x0c
pci3 at ppb2 bus 3
ppb3 at pci3 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci4 at ppb3 bus 4
em4 at pci4 dev 12 function 0 "Intel PRO/1000MF (82546GB)" rev 0x03: irq 
10, add
ress 00:10:f3:09:32:0c
em5 at pci4 dev 12 function 1 "Intel PRO/1000MF (82546GB)" rev 0x03: irq 
11, add
ress 00:10:f3:09:32:0d
"Intel IOxAPIC" rev 0x09 at pci3 dev 0 function 1 not configured
ppb4 at pci3 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci5 at ppb4 bus 5
"Intel IOxAPIC" rev 0x09 at pci3 dev 0 function 3 not configured
ppb5 at pci0 dev 5 function 0 "Intel MCH PCIE" rev 0x0c
pci6 at ppb5 bus 6
ppb6 at pci0 dev 6 function 0 "Intel MCH PCIE" rev 0x0c
pci7 at ppb6 bus 7
em6 at pci7 dev 0 function 0 "Intel PRO/1000 PT (82571EB)" rev 0x06: 
can't find
io space
em6: Allocation of PCI resources failed
em7 at pci7 dev 0 function 1 "Intel PRO/1000 PT (82571EB)" rev 0x06: irq 
11, add
ress 00:10:f3:0a:4f:cf
ppb7 at pci0 dev 7 function 0 "Intel MCH PCIE" rev 0x0c
pci8 at ppb7 bus 8
em8 at pci8 dev 0 function 0 "Intel PRO/1000 PT (82571EB)" rev 0x06: irq 
10, add
ress 00:10:f3:0a:4f:d0
em9 at pci8 dev 0 function 1 "Intel PRO/1000 PT (82571EB)" rev 0x06: irq 
11, add
ress 00:10:f3:0a:4f:d1
ppb8 at pci0 dev 28 function 0 "Intel 6300ESB PCIX" rev 0x02
pci9 at ppb8 bus 9
"Intel 6300ESB USB" rev 0x02 at pci0 dev 29 function 0 not configured
"Intel 5300ESB USB" rev 0x02 at pci0 dev 29 function 1 not configured
"Intel 6300ESB WDT" rev 0x02 at pci0 dev 29 function 4 not configured
"Intel 6300ESB APIC" rev 0x02 at pci0 dev 29 function 5 not configured
"Intel 6300ESB USB" rev 0x02 at pci0 dev 29 function 7 not configured
ppb9 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x0a
pci10 at ppb9 bus 10
vga1 at pci10 dev 14 function 0 "Silicon Motion LynxEM+" rev 0xb0
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
fxp0 at pci10 dev 15 function 0 "Intel 82559ER" rev 0x10, i82551: irq 
11, addres
s 00:10:f3:0a:4f:70
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
ichpcib0 at pci0 dev 31 function 0 "Intel 6300ESB LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 6300ESB IDE" rev 0x02: DMA, 
channel 0 c
onfigured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
wd0 at pciide0 channel 1 drive 0: <Maxtor 6L080L0>
wd0: 16-sector PIO, LBA, 78167MB, 160086528 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
"Intel 6300ESB SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask f3e5 netmask ffe5 ttymask ffe7
rd0: fixed, 3800 blocks
dkcsum: wd0 matches BIOS drive 0x80
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02

Here is the PCI table from the BIOS:
PCI device listing ...
Bus No. Device No. Func No. Vendor/Device Class Device Class 
   IRQ
--------------------------------------------------------------------------------
    0       1         0     8086   3594   0880  Base Sys. Peripherals 
     NA
    0      29         0     8086   25A9   0C03  USB 1.0/1.1 UHCI Cntrlr 
    10
    0      29         1     8086   25AA   0C03  USB 1.0/1.1 UHCI Cntrlr 
    11
    0      29         4     8086   25AB   0880  Base Sys. Peripherals 
     NA
    0      29         5     8086   25AC   0800  I/O(X) APIC Cntrlr 
     NA
    0      31         1     8086   25A2   0101  IDE CntrlrCI Cntrlr 
     14
    0      31         3     8086   25A4   0C05  SMBus Cntrlr 
     11
    1       0         0     8086   105E   0200  Network Cntrlr 
     10
    1       0         1     8086   105E   0200  Network Cntrlr 
     11
    2       0         0     8086   105E   0200  Network Cntrlr 
     10
    2       0         1     8086   105E   0200  Network Cntrlr 
     11
    3       0         1     8086   0326   0800  I/O(X) APIC Cntrlr 
     NA
    3       0         3     8086   0327   0800  I/O(X) APIC Cntrlr 
     NA
    4      12         0     8086   107B   0200  Network Cntrlr 
     10
    4      12         1     8086   107B   0200  Network Cntrlr 
     11
    7       0         0     8086   105E   0200  Network Cntrlr 
     10
    7       0         1     8086   105E   0200  Network Cntrlr 
     11
    8       0         0     8086   105E   0200  Network Cntrlr 
     10
    8       0         1     8086   105E   0200  Network Cntrlr 
     11
   10      14         0     126F   0712   0300  Display Cntrlr 
      5
   10      15         0     8086   1209   0200  Network Cntrlr 
     11
                                                ACPI Controller 
      9


Regards,

Benjamin PAGES.