[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
panic(?) when doing fsck on usb2 HD
- To: bugs_(_at_)_openbsd_(_dot_)_org
- Subject: panic(?) when doing fsck on usb2 HD
- From: Daniel W Barowy <dan_(_at_)_barowy_(_dot_)_net>
- Date: Thu, 18 Aug 2005 15:56:22 -0400
- Cc: echang_(_at_)_bedfordstmartins_(_dot_)_com
Hello,
I have OpenBSD 3.7 (from CD-ROM) and -stable patches installed, and
it runs normally on this machine until this crash. I recently added a
USB 2.0 PCI card to this machine (IOGear GIC220U; "Acer Labs" in the
dmesg, I think), and I've plugged in an external USB2 200 GB LaCie drive.
I can get this machine to crash every time if I follow this procedure:
1. Boot machine.
2. Log in, type "sudo fsck /dev/sd1a"
3. I will see the following on the screen-- the problem always appears
during "Phase 5" of an fsck:
-bash-3.00$ sudo fsck /dev/sd1a
** /dev/rsd1a
** Last Mounted on /mnt/lacie
** Phase 1 - Check Blocks and Sizes
INCORRECT BLOCK COUNT I=2617222 (72 should be 0)
CORRECT? [yn] y
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
Stopped at apm_cpu_idle+0x4a: leal 0xfffffff4(%ebp),%esp
ddb{1}>
Apologies in advance if this was fixed in -current. I do not have
the liberty of testing (during regular work hours, at least) on this
machine, as it is a production machine.
dmesg:
OpenBSD 3.7-stable (GENERIC.MP) #1: Tue Jul 26 12:45:05 EDT 2005
root_(_at_)_marketing_(_dot_)_bedfordstmartins_(_dot_)_com:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 993 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 1073319936 (1048164K)
avail mem = 972853248 (950052K)
using 4278 buffers containing 53768192 bytes (52508K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 04/04/01, BIOS32 rev. 0 @ 0xffe90
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc1e0/240 (13 entries)
pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks ROSB4
SouthBridge" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x200 0xc8800/0x1400
mainbus0: Intel MP Specification (Version 1.4) (DELL POWEREDGE 9A)
cpu0 at mainbus0: apid 1 (boot processor)
cpu0: apic clock running at 132 MHz
cpu1 at mainbus0: apid 0 (application processor)
cpu1: Intel Pentium III ("GenuineIntel" 686-class) 993 MHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type PCI
mainbus0: bus 5 is type PCI
mainbus0: bus 6 is type PCI
mainbus0: bus 7 is type PCI
mainbus0: bus 8 is type PCI
mainbus0: bus 9 is type PCI
mainbus0: bus 10 is type PCI
mainbus0: bus 11 is type PCI
mainbus0: bus 12 is type PCI
mainbus0: bus 13 is type PCI
mainbus0: bus 14 is type PCI
mainbus0: bus 15 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 16 pins
ioapic0: misconfigured as apic 0, remapped to apic 2
ioapic1 at mainbus0: apid 3 pa 0xfec01000, version 11, 16 pins
ioapic1: misconfigured as apic 0, remapped to apic 3
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x06
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x06
pci1 at pchb1 bus 1
vga1 at pci0 dev 6 function 0 "ATI Mach64 GY" rev 0x7a
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ohci0 at pci0 dev 8 function 0 "Acer Labs M5237 USB" rev 0x03: apic 3
int 8 (irq 14), version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 8 function 3 vendor "Acer Labs", unknown product
0x5239 rev 0x01: apic 3 int 1 (irq 11)
ehci0: EHCI version 1.0
ehci0: companion controller, 2 ports each: ohci0
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: Acer Labs EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: single transaction translator
uhub1: 6 ports with 6 removable, self powered
pcib0 at pci0 dev 15 function 0 "ServerWorks ROSB4 SouthBridge" rev 0x50
pchb2 at pci0 dev 17 function 0 "ServerWorks CNB20LE Host" rev 0x06
pci2 at pchb2 bus 6
ppb0 at pci2 dev 4 function 0 "Intel i960 RM PCI-PCI" rev 0x02
pci3 at ppb0 bus 7
ahc1 at pci3 dev 6 function 0 "Adaptec AIC-7880" rev 0x02: apic 3 int 9
(irq 7)
scsibus0 at ahc1: 8 targets
cd0 at scsibus0 targ 5 lun 0: <NEC, CD-ROM DRIVE:466, 1.07> SCSI2
5/cdrom removable
pchb3 at pci0 dev 17 function 1 "ServerWorks CNB20LE Host" rev 0x06
pci4 at pchb3 bus 8
fxp0 at pci4 dev 4 function 0 "Intel 82557" rev 0x08, i82559: apic 3 int
5 (irq 5), address 00:02:b3:5d:40:3a
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
ppb1 at pci4 dev 8 function 0 "DEC 21154 PCI-PCI" rev 0x05
pci5 at ppb1 bus 9
ppb2 at pci5 dev 0 function 0 "DEC 21154 PCI-PCI" rev 0x05
pci6 at ppb2 bus 10
ami0 at pci6 dev 0 function 0 "AMI MegaRAID" rev 0x20: apic 3 int 3 (irq
10) Dell 493/64b/lhc
ami0: FW 1.57, BIOS v3.13, 128MB RAM
ami0: 2 channels, 0 FC loops, 1 logical drives
scsibus1 at ami0: 40 targets
sd0 at scsibus1 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
sd0: 51834MB, 6607 cyl, 255 head, 63 sec, 512 bytes/sec, 106156032 sec total
"QLogic ISP12160" rev 0x06 at pci5 dev 1 function 0 not configured
ahc2 at pci4 dev 10 function 0 "Adaptec AHA-3960D U160" rev 0x01: apic 3
int 2 (irq 14)
scsibus2 at ahc2: 16 targets
ahc3 at pci4 dev 10 function 1 "Adaptec AHA-3960D U160" rev 0x01: apic 3
int 9 (irq 7)
scsibus3 at ahc3: 16 targets
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 0 netmask 0 ttymask 0
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
umass0 at uhub1 port 1 configuration 1 interface 0
umass0: LaCie USB 2.0 LaCie d2 HD, rev 2.00/9a.bc, addr 2
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets
sd1 at scsibus4 targ 1 lun 0: <WDC WD20, 00BB-22FTA0, 15.0> SCSI4
0/direct fixed
sd1: 190782MB, 190782 cyl, 64 head, 32 sec, 512 bytes/sec, 390721968 sec
total
dkcsum: sd0 matched BIOS disk 80
dkcsum: sd1 had no matching BIOS disk
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
WARNING: / was not properly unmounted
-bash-3.00$
-bash-3.00$
-bash-3.00$
-bash-3.00$ cat /var/run/
cron.pid dmesg.boot ld.so.hints sendmail.pid syslog.pid
dev.db inetd.pid pflogd.pid sshd.pid utmp
-bash-3.00$ cat /var/run/dmesg.boot
OpenBSD 3.7-stable (GENERIC.MP) #1: Tue Jul 26 12:45:05 EDT 2005
root_(_at_)_marketing_(_dot_)_bedfordstmartins_(_dot_)_com:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 993 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 1073319936 (1048164K)
avail mem = 972853248 (950052K)
using 4278 buffers containing 53768192 bytes (52508K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 04/04/01, BIOS32 rev. 0 @ 0xffe90
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc1e0/240 (13 entries)
pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks ROSB4
SouthBridge" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x200 0xc8800/0x1400
mainbus0: Intel MP Specification (Version 1.4) (DELL POWEREDGE 9A)
cpu0 at mainbus0: apid 1 (boot processor)
cpu0: apic clock running at 132 MHz
cpu1 at mainbus0: apid 0 (application processor)
cpu1: Intel Pentium III ("GenuineIntel" 686-class) 993 MHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type PCI
mainbus0: bus 5 is type PCI
mainbus0: bus 6 is type PCI
mainbus0: bus 7 is type PCI
mainbus0: bus 8 is type PCI
mainbus0: bus 9 is type PCI
mainbus0: bus 10 is type PCI
mainbus0: bus 11 is type PCI
mainbus0: bus 12 is type PCI
mainbus0: bus 13 is type PCI
mainbus0: bus 14 is type PCI
mainbus0: bus 15 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 16 pins
ioapic0: misconfigured as apic 0, remapped to apic 2
ioapic1 at mainbus0: apid 3 pa 0xfec01000, version 11, 16 pins
ioapic1: misconfigured as apic 0, remapped to apic 3
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x06
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x06
pci1 at pchb1 bus 1
vga1 at pci0 dev 6 function 0 "ATI Mach64 GY" rev 0x7a
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ohci0 at pci0 dev 8 function 0 "Acer Labs M5237 USB" rev 0x03: apic 3
int 8 (irq 14), version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 8 function 3 vendor "Acer Labs", unknown product
0x5239 rev 0x01: apic 3 int 1 (irq 11)
ehci0: EHCI version 1.0
ehci0: companion controller, 2 ports each: ohci0
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: Acer Labs EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: single transaction translator
uhub1: 6 ports with 6 removable, self powered
pcib0 at pci0 dev 15 function 0 "ServerWorks ROSB4 SouthBridge" rev 0x50
pchb2 at pci0 dev 17 function 0 "ServerWorks CNB20LE Host" rev 0x06
pci2 at pchb2 bus 6
ppb0 at pci2 dev 4 function 0 "Intel i960 RM PCI-PCI" rev 0x02
pci3 at ppb0 bus 7
ahc1 at pci3 dev 6 function 0 "Adaptec AIC-7880" rev 0x02: apic 3 int 9
(irq 7)
scsibus0 at ahc1: 8 targets
cd0 at scsibus0 targ 5 lun 0: <NEC, CD-ROM DRIVE:466, 1.07> SCSI2
5/cdrom removable
pchb3 at pci0 dev 17 function 1 "ServerWorks CNB20LE Host" rev 0x06
pci4 at pchb3 bus 8
fxp0 at pci4 dev 4 function 0 "Intel 82557" rev 0x08, i82559: apic 3 int
5 (irq 5), address 00:02:b3:5d:40:3a
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
ppb1 at pci4 dev 8 function 0 "DEC 21154 PCI-PCI" rev 0x05
pci5 at ppb1 bus 9
ppb2 at pci5 dev 0 function 0 "DEC 21154 PCI-PCI" rev 0x05
pci6 at ppb2 bus 10
ami0 at pci6 dev 0 function 0 "AMI MegaRAID" rev 0x20: apic 3 int 3 (irq
10) Dell 493/64b/lhc
ami0: FW 1.57, BIOS v3.13, 128MB RAM
ami0: 2 channels, 0 FC loops, 1 logical drives
scsibus1 at ami0: 40 targets
sd0 at scsibus1 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
sd0: 51834MB, 6607 cyl, 255 head, 63 sec, 512 bytes/sec, 106156032 sec total
"QLogic ISP12160" rev 0x06 at pci5 dev 1 function 0 not configured
ahc2 at pci4 dev 10 function 0 "Adaptec AHA-3960D U160" rev 0x01: apic 3
int 2 (irq 14)
scsibus2 at ahc2: 16 targets
ahc3 at pci4 dev 10 function 1 "Adaptec AHA-3960D U160" rev 0x01: apic 3
int 9 (irq 7)
scsibus3 at ahc3: 16 targets
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 0 netmask 0 ttymask 0
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
umass0 at uhub1 port 1 configuration 1 interface 0
umass0: LaCie USB 2.0 LaCie d2 HD, rev 2.00/9a.bc, addr 2
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets
sd1 at scsibus4 targ 1 lun 0: <WDC WD20, 00BB-22FTA0, 15.0> SCSI4
0/direct fixed
sd1: 190782MB, 190782 cyl, 64 head, 32 sec, 512 bytes/sec, 390721968 sec
total
dkcsum: sd0 matched BIOS disk 80
dkcsum: sd1 had no matching BIOS disk
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
WARNING: / was not properly unmounted
I am not entirely sure if this is a kernel panic or not. If I run 'show
panic' at the ddb{1}> prompt, I get: "the kernel did not panic", and
bear with me for a moment, it appears to crash later...
Here is a trace:
ddb{1}> trace
apm_cpu_idle(0,0,0,0,0) at apm_cpu_idle+0x4a
Here is the output of ps:
ddb{1}> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
20783 8059 8059 0 3 0x2004006 physio fsck_ffs
8059 25244 8059 0 3 0x2004086 wait fsck
25244 1 25244 1000 3 0x2004086 wait bash
7428 1 7428 0 3 0x2004086 ttyin getty
12415 1 12415 0 3 0x2004086 ttyin getty
12894 1 12894 0 3 0x2004086 ttyin getty
5890 1 5890 0 3 0x2004086 ttyin getty
24058 1 24058 0 3 0x2004086 ttyin getty
10802 1 10802 0 3 0x2000084 select cron
23745 1 23745 0 3 0x2040184 select sendmail
19478 1 19478 0 3 0x2000084 select sshd
15794 1 15794 0 3 0x2000184 select inetd
7514 1 7514 0 3 0x2000084 poll ntpd
1237 1 32685 83 3 0x2000186 poll ntpd
25195 25493 25493 74 3 0x2000184 bpf pflogd
25493 1 25493 0 3 0x2000084 netio pflogd
16399 3993 3993 73 3 0x2000184 poll syslogd
3993 1 3993 0 3 0x2000084 netio syslogd
11 0 0 0 3 0x2100204 crypto_wa crypto
10 0 0 0 3 0x2100204 aiodoned aiodoned
9 0 0 0 3 0x2100204 syncer update
8 0 0 0 3 0x2100204 cleaner cleaner
7 0 0 0 3 0x100204 reaper reaper
6 0 0 0 3 0x2100204 pgdaemon pagedaemon
5 0 0 0 3 0x2100204 usbevt usb1
4 0 0 0 3 0x2100204 usbtsk usbtask
3 0 0 0 3 0x2100204 usbevt usb0
2 0 0 0 3 0x2100204 kmalloc kmthread
1 0 1 0 3 0x2004084 wait init
0 -1 0 0 3 0x2080204 scheduler swapper
Here is the output of 'show registers':
ddb{1}> show registers
ds 0xe9020010
es 0x10
fs 0x58
gs 0xe9020010
edi 0xe9023000
esi 0
ebp 0xe9024f90
ebx 0
edx 0xa
ecx 0xd1862c00 end+0x11f9290
eax 0
eip 0xd0466a52 apm_cpu_idle+0x4a
cs 0x8
eflags 0x246
esp 0xe9024f68
ss 0xe9020010
apm_cpu_idle+0x4a: leal 0xfffffff4(%ebp),%esp
Now, however, if I run "boot dump", I seem to get a kernel panic. Of
course, this may have something to do with my limited understanding of
ddb (just following the instructions in the FAQ, here). I'll run
through all of the trace, ps, show registers stuff again, too:
ddb{1}> boot dump
syncing disks... panic: tsleep
Stopped at Debugger+0x4: leave
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb{1}> show panic
tsleep
ddb{1}> trace
Debugger(e9024b88,0,e9024b80,d05bb8e0,40) at Debugger+0x4
panic(d04e4438,e9024bd8,e9024bb0,d0200563,0) at panic+0x63
ltsleep(d7ddc9a4,11,d04f85dd,0,0,0,e9024be0,0) at ltsleep+0xfb
vwaitforio(d7ddc934,0,d04f85dd,0,0) at vwaitforio+0x40
ffs_fsync(e9024c28,d7ddc934,30042,d05bb8e0,d056d280) at ffs_fsync+0xb0
VOP_FSYNC(d7ddc934,d7dfc000,1,d05bb8e0,d7ddc934,20002,d05bb8e0,d18e5800)
at VOP
_FSYNC+0x34
ffs_sync(d18e5800,1,d7dfc000,d05bb8e0) at ffs_sync+0xc7
dounmount(d18e5800,80000,d05bb8e0,0) at dounmount+0x43
vfs_unmountall(d05bb8e0,0,0,d056c664) at vfs_unmountall+0xc2
vfs_shutdown(e9024d88,0,e9024d60,d01e1870,4900) at vfs_shutdown+0x70
boot(4900,1,e9024d80,0,0) at boot+0x178
db_boot_halt_cmd(d0466a52,0,ffffffff,e9024d88,d056ac20) at db_boot_halt_cmd
db_command(d056ac20,d056aa40,e9024e90,d01e1691,e9024e6c) at db_command+0xff
db_command_loop(0,e9024f28,e9024ed0,d03305f4,9) at db_command_loop+0x9c
db_trap(9,0,e9024ed0,d0330599,e9024f18) at db_trap+0x86
kdb_trap(9,0,e9024f28,d1862c00) at kdb_trap+0xe8
trap() at trap+0xb9
--- trap (number 9) ---
apm_cpu_idle(0,0,0,0,0) at apm_cpu_idle+0x4a
ddb{1}> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
20783 8059 8059 0 3 0x2004006 physio fsck_ffs
8059 25244 8059 0 3 0x2004086 wait fsck
25244 1 25244 1000 3 0x2004086 wait bash
7428 1 7428 0 3 0x2004086 ttyin getty
12415 1 12415 0 3 0x2004086 ttyin getty
12894 1 12894 0 3 0x2004086 ttyin getty
5890 1 5890 0 3 0x2004086 ttyin getty
24058 1 24058 0 3 0x2004086 ttyin getty
10802 1 10802 0 3 0x2000084 select cron
23745 1 23745 0 3 0x2040184 select sendmail
19478 1 19478 0 3 0x2000084 select sshd
15794 1 15794 0 3 0x2000184 select inetd
7514 1 7514 0 3 0x2000084 poll ntpd
1237 1 32685 83 3 0x2000186 poll ntpd
25195 25493 25493 74 3 0x2000184 bpf pflogd
25493 1 25493 0 3 0x2000084 netio pflogd
16399 3993 3993 73 2 0x2000184 syslogd
3993 1 3993 0 3 0x2000084 netio syslogd
11 0 0 0 3 0x2100204 crypto_wa crypto
10 0 0 0 3 0x2100204 aiodoned aiodoned
9 0 0 0 3 0x2100204 syncer update
8 0 0 0 3 0x2100204 cleaner cleaner
7 0 0 0 3 0x100204 reaper reaper
6 0 0 0 3 0x2100204 pgdaemon pagedaemon
5 0 0 0 3 0x2100204 usbevt usb1
4 0 0 0 3 0x2100204 usbtsk usbtask
3 0 0 0 3 0x2100204 usbevt usb0
2 0 0 0 3 0x2100204 kmalloc kmthread
1 0 1 0 3 0x2004084 wait init
* 0 -1 0 0 3 0x2080204 scheduler swapper
ddb{1}> show registers
ds 0x10
es 0xd0100010 kernel_text+0x10
fs 0xe9020058
gs 0xe9020010
edi 0xd04e4438 addrmask+0xdb8
esi 0xe9024b7c
ebp 0xe9024b50
ebx 0x100
edx 0xa
ecx 0xd056c664 kprintf_mutex
eax 0x1
eip 0xd0330a84 Debugger+0x4
cs 0x8
eflags 0x202
esp 0xe9024b50
ss 0xe9020010
Debugger+0x4: leave
Now, if I run "boot dump" again, I get the following message:
dumping to dev 401, offset 6288793
dump area improper
But I suspect this last bit has something to do with me not having
configured a place to actually put a dump file.
Thanks! Let me know if I can supply any additional information.
Dan Barowy
Visit your host, monkey.org