[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

typematic rate setting too high (xorg build on OBSD-current)



Hi all,

There seems to be no predefinded category for xorg in sendbug, so I'm 
sending this as a normal mail.

I've rebuilt OBSD-current and xorg today. The typematic rate has 
accelerated drastically since then. It is still adjustable via the menu 
in XFCE4 - but I had to set it to "very slow" to keep my (M$ natural) 
keyboard usable.

Regards,
Andreas
syncing disks... OpenBSD 3.6-current (GENERIC) #0: Sun Dec 19 14:22:17 CET 2004
    root_(_at_)_obsd_(_dot_)_bartula_(_dot_)_de:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) XP 2600+ ("AuthenticAMD" 686-class) 1.93 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem  = 536387584 (523816K)
avail mem = 482484224 (471176K)
using 4278 buffers containing 26923008 bytes (26292K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(6e) BIOS, date 07/17/03, BIOS32 rev. 0 @ 0xfb990
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xd8e4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd820/192 (10 entries)
pcibios0: PCI Exclusive IRQs: 3 5 10 11
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xd000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Nvidia nForce2 PCI" rev 0xc1
"Nvidia nForce2" rev 0xc1 at pci0 dev 0 function 1 not configured
"Nvidia nForce2" rev 0xc1 at pci0 dev 0 function 2 not configured
"Nvidia nForce2" rev 0xc1 at pci0 dev 0 function 3 not configured
"Nvidia nForce2" rev 0xc1 at pci0 dev 0 function 4 not configured
"Nvidia nForce2" rev 0xc1 at pci0 dev 0 function 5 not configured
pcib0 at pci0 dev 1 function 0 "Nvidia nForce2 ISA" rev 0xa3
"Nvidia nForce2 SMBus" rev 0xa2 at pci0 dev 1 function 1 not configured
ohci0 at pci0 dev 2 function 0 "Nvidia nForce2 USB" rev 0xa3: irq 10, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Nvidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 2 function 1 "Nvidia nForce2 USB" rev 0xa3: irq 11, version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Nvidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0 at pci0 dev 2 function 2 "Nvidia nForce2 USB" rev 0xa3: irq 3
ehci0: EHCI version 1.0
ehci0: companion controllers, 4 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Nvidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
"Nvidia nForce2 Audio" rev 0xa2 at pci0 dev 5 function 0 not configured
auich0 at pci0 dev 6 function 0 "Nvidia nForce2 AC-97 Audio" rev 0xa1: irq 10, nForce2 AC97
ac97: codec id 0x414c4720 (Avance Logic ALC650)
ac97: codec features 20 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auich0
ppb0 at pci0 dev 8 function 0 "Nvidia nForce2 PCI-PCI" rev 0xa3
pci1 at ppb0 bus 1
fxp0 at pci1 dev 9 function 0 "Intel 82557" rev 0x05, i82558: irq 11, address 00:90:27:17:de:a7
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 0
pciide0 at pci0 dev 9 function 0 "Nvidia nForce2 IDE" rev 0xa2: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG SV1203N>
wd0: 16-sector PIO, LBA48, 114498MB, 234493056 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <YAMAHA, CRW8824E, 1.00> SCSI0 5/cdrom removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <PIONEER, DVD-ROM DVD-104F, 1.23> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
ppb1 at pci0 dev 30 function 0 "Nvidia nForce2 AGP" rev 0xc1
pci2 at ppb1 bus 2
vga1 at pci2 dev 0 function 0 vendor "ATI", unknown product 0x4150 rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
vendor "ATI", unknown product 0x4170 (class display subclass miscellaneous, rev 0x00) at pci2 dev 0 function 1 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ef6d netmask ef6d ttymask ffef
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
uhub3 at uhub2 port 3
uhub3: NEC Corporation USB2.0 Hub Controller, class 9/0, rev 2.00/1.00, addr 2
uhub3: 4 ports with 4 removable, self powered
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
auich0: measured ac97 link rate at 48004 Hz, will use 48000 Hz
Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	ModulePath   "/usr/X11R6/lib/modules"
	FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
	FontPath     "/usr/X11R6/lib/X11/fonts/mscorefonts/"
	FontPath     "/usr/X11R6/lib/X11/fonts/TTF/"
	FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
	FontPath     "/usr/X11R6/lib/X11/fonts/CID/"
	FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
	FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
	Load  "extmod"
	Load  "glx"
	Load  "dbe"
	Load  "record"
	Load  "xtrap"
	Load  "type1"
	Load  "freetype"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option      "XkbModel" "microsoft"
	Option      "XkbLayout" "de"
	Option      "XkbRules" "xorg"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "wsmouse"
	Option	    "Device" "/dev/wsmouse"
	Option	    "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
	#DisplaySize	  350   260	# mm
	Identifier   "Monitor0"
	VendorName   "LCA"
	ModelName    "electr19b2"
 ### Uncomment if you don't want to default to DDC:
#	HorizSync    30.0 - 108.0
#	HorizSync    57.0 - 0.0
#	VertRefresh  50.0 - 140.0
	Option	    "DPMS"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "Dac8Bit"            	# [<bool>]
        #Option     "PanelOff"           	# [<bool>]
        #Option     "DDCMode"            	# [<bool>]
        #Option     "MonitorLayout"      	# [<str>]
        #Option     "IgnoreEDID"         	# [<bool>]
        #Option     "UseFBDev"           	# [<bool>]
        #Option     "VideoKey"           	# <i>
        #Option     "MergedFB"           	# [<bool>]
        #Option     "CRT2HSync"          	# [<str>]
        #Option     "CRT2VRefresh"       	# [<str>]
        #Option     "CRT2Position"       	# [<str>]
        #Option     "MetaModes"          	# [<str>]
        #Option     "MergedDPI"          	# [<str>]
        #Option     "NoMergedXinerama"   	# [<bool>]
        #Option     "MergedXineramaCRT2IsScreen0" 	# [<bool>]
        #Option     "DisplayPriority"    	# [<str>]
        #Option     "PanelSize"          	# [<str>]
        #Option     "ForceMinDotClock"   	# <freq>
        #Option     "RenderAccel"        	# [<bool>]
        #Option     "SubPixelOrder"      	# [<str>]
        #Option     "ShowCache"          	# [<bool>]
        #Option     "DynamicClocks"      	# [<bool>]
	Identifier  "Card0"
	Driver      "ati"
	VendorName  "ATI Technologies Inc"
	BoardName   "RV350 AP [Radeon 9600]"
	BusID       "PCI:2:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	DefaultColorDepth 24
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes "1280x960" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection