sparc64 ultra 1 enterprise with le sbus

[Tyler Hardison <thardison_(_at_)_modbee_(_dot_)_com>]

With le sbus installed:

Sun Ultra 1 UPA/SBus (UltraSPARC 167MHz), No Keyboard
OpenBoot 3.25, 256 MB memory installed, Serial #8125726.
Ethernet address 8:0:20:7b:fd:1e, Host ID: 807bfd1e.



Rebooting with command: boot
Boot device: disk  File and args:
OpenBSD IEEE 1275 Bootblock
..>> OpenBSD 3.3-beta (obj) #22: Sun Mar  2 10:33:34 MST 2003
    
deraadt_(_at_)_sparc64_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/sparc64/stand/ofwboot/obj
devopen: getdisklabel says no disk label
Booting /sbus_(_at_)_1f,0/SUNW,fas_(_at_)_e,8800000/sd_(_at_)_0,0:a/bsd
3338632_(_at_)_0x1000000+161520@0x1800000+4032784_(_at_)_0x18276f0
symbols @ 0xfff2c300 73+195936+114239 start=0x1000000
[ using 311024 bytes of bsd ELF symbol table ]
console is /sbus_(_at_)_1f,0/zs_(_at_)_f,1100000:a
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights 
reserved.
Copyright (c) 1995-2003 OpenBSD. All rights reserved.  
http://www.OpenBSD.org

OpenBSD 3.3-beta (GENERIC) #31: Sun Mar  2 13:38:32 MST 2003
    
deraadt_(_at_)_sparc64_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/sparc64/compile/GENERIC
total memory = 268435456
avail memory = 240353280
using 1638 buffers containing 13418496 bytes of memory
bootpath: /sbus_(_at_)_1f,0/SUNW,fas_(_at_)_e,8800000/sd_(_at_)_0,0
mainbus0 (root): Sun Ultra 1 UPA/SBus (UltraSPARC 167MHz)
cpu0 at mainbus0: SUNW,UltraSPARC @ 166.995 MHz, version 0 FPU
cpu0: physical 32K instruction (32 b/l), 16K data (32 b/l), 512K 
external (64 b/l)
timer0 at mainbus0 addr 0xfffc7c00 irq vectors 7f0 and 7f1
sbus0 at mainbus0 addr 0xfffcc000: clock = 25 MHz
DVMA map: ff800000 to ffffe000
IOTDB: f64000 to f66000
audiocs0 at sbus0 slot 13 offset 0xc000000 vector 24 ipl 13
audio0 at audiocs0
auxio0 at sbus0 slot 15 offset 0x1900000
flashprom at sbus0 slot 15 offset 0x0 not configured
SUNW,fdtwo at sbus0 slot 15 offset 0x1400000 vector 29 ipl 11 not 
configured
clock0 at sbus0 slot 15 offset 0x1200000: mk48t59: hostid 807bfd1e
zs0 at sbus0 slot 15 offset 0x1100000 vector 28 ipl 12 softpri 6
zstty0 at zs0 channel 0 (console i/o)
zstty1 at zs0 channel 1
zs1 at sbus0 slot 15 offset 0x1000000 vector 28 ipl 12 softpri 6
zskbd0 at zs1 channel 0
wskbd0 at zskbd0
zstty2 at zs1 channel 1, mouse
uperf0 at sbus0 slot 15 offset 0x1300000: model SUNW,sc-up (0/0) ports 3
SUNW,pll at sbus0 slot 15 offset 0x1304000 not configured
esp0 at sbus0 slot 14 offset 0x8800000 vector 20 ipl 3: dma rev fas
esp0: FAS366/HME, 40MHz, SCSI ID 7
scsibus0 at esp0: 8 targets
sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST34371W SUN4.2G, 7462> SCSI2 
0/direct fixed
sd0: 4094MB, 3882 cyl, 16 head, 135 sec, 512 bytes/sec, 8385121 sec 
total
sd1 at scsibus0 targ 1 lun 0: <SEAGATE, ST34371W SUN4.2G, 7462> SCSI2 
0/direct fixed
sd1: 4094MB, 3882 cyl, 16 head, 135 sec, 512 bytes/sec, 8385121 sec 
total
cd0 at scsibus0 targ 6 lun 0: <IBM, CDRM00203 !K, BZ26> SCSI2 5/cdrom 
removable
hme0 at sbus0 slot 14 offset 0x8c00000 vector 21 ipl 6: address 
08:00:20:7b:fd:1e
nsphy0 at hme0 phy 1: DP83840 10/100 media interface, rev. 0
SUNW,bpp at sbus0 slot 14 offset 0xc800000 vector 22 ipl 2 not 
configured
dma0 at sbus0 slot 1 offset 0x81000: dma rev esc
esp1 at dma0 slot 1 offset 0x80000 vector 3 ipl 3: ESP200, 40MHz, SCSI 
ID 7
scsibus1 at esp1: 8 targets
lebuffer0 at sbus0 slot 1 offset 0x40000: 128K memory
le0 at lebuffer0 slot 1 offset 0x60000 vector 4 ipl 6data fault: 
pc=11f53a0 addr=e0064000
panic: kernel fault
kdb breakpoint at 12653a8
Stopped at      Debugger+0x4:   nop
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS 
PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb> ps
   PID   PPID   PGRP    UID  S       FLAGS  WAIT       COMMAND
ddb> trace
data_access_fault(1c08f00, 0, 11f53a0, e0064000, e0064002, 3) at 
data_access_fa
ult+0x200
trapbase(1fde800, 0, 4, 2007300, f005d35c, 1fdebf8) at trapbase+0x87ac
am7990_stop(1fde800, 1fc5f60, 1850000, 1fc5f60, 0, 1fdebf8) at 
am7990_stop+0x10

am7990_config(1fde800, 1037d38, 1037d60, 11f53c4, 11f5374, 1fd1af0) at 
am7990_c
onfig+0x4
leattach_lebuffer(1fd5600, 1fde800, 1c095d0, 11f5438, 4, 1fd1ae0) at 
leattach_l
ebuffer+0x134
config_attach(1fde800, 1fde800, 1c095d0, 11f4c28, 1c09618, 1fd1af0) at 
config_a
ttach+0x1c4
config_found_sm(1fd5600, 1c095d0, 11f4c28, 0, 1c095d0, d) at 
config_found_sm+0x
24
lebufattach(1fc3800, 1fd5600, fffffffff00783d8, 11f4c80, 1c09698, d) at 
lebufat
tach+0x198
config_attach(1fd5600, 1fd5600, 1c098a0, 1218c78, 1c098e8, 1fd1b20) at 
config_a
ttach+0x1c4
config_found_sm(1fc3800, 1c098a0, 1218c78, 0, 1c098a0, 0) at 
config_found_sm+0x
24
sbus_attach(1fcff80, 1fc3800, 1851010, 1218d40, f005d35c, 0) at 
sbus_attach+0x3
5c
config_attach(1fc3800, 1fc3800, 1c09b70, 1253fdc, 1fd1f90, d) at 
config_attach+
0x1c4
config_found_sm(1fcff80, 1c09b70, 1253fdc, 0, 1c09b90, 0) at 
config_found_sm+0x
24
mainbus_match(0, 1fcff80, 0, 1254138, f005d35c, 182d040) at 
mainbus_match+0x41c

config_attach(1fcff80, 1fcff80, 0, 0, 1c09cc0, 184fe90) at 
config_attach+0x1c4
config_rootfound(1323e98, 0, 10, 0, 1800, 1295678) at 
config_rootfound+0x48
cpu_configure(3ff0, 400, 1800, f, f005d35c, 1800) at cpu_configure+0x64
main(0, 108c710, e000000033c00074, 0, 50, 1009650) at main+0x90
print_dtlb(800, 1000, 1000000, fffb5a80, 18, fffb5cb3) at 
print_dtlb+0x4f8
ddb>

Fresh install just after first boot.

Tyler.