Problem installing 2.7 on a HP Netserver LC2000r

[Volker Kindermann <volker_(_dot_)_kindermann_(_at_)_innominate_(_dot_)_com>]

Hi,

I've tried to install OpenBSD 2.7 on a HP Netserver LC2000r. But there
is a problem with the hardware detection (dmesg File attached to this
mail). The installer can't find any harddrive.

But the harddrive is there, RedHat Linux installs flawless.

This machine should serve as a firewall and I would like it running
OpenBSD instead of linux.

Could you help?

Thank you very much
Volker 


OpenBSD 2.7 (RAMDISK) #71: Sat May 13 18:18:00 MDT 2000
    deraadt_(_at_)_i386_(_dot_)_openbsd_(_dot_)_org:/usr/src/sys/arch/i386/compile/RAMDISK
cpu0: Intel Pentium III (Coppermine) ("GenuineIntel" 686-class) 592 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,MMX,FXSR,SIMD
real mem  = 133730304 (130596K)
avail mem = 120115200 (117300K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(48) BIOS, date 07/06/00
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Reliance Computer CNB20LE Host" rev 0x05
pchb1 at pci0 dev 0 function 1 "Reliance Computer CNB20LE Host" rev 0x05
pci1 at pchb1 bus 3
ncr0 at pci1 dev 6 function 0 "Symbios Logic 53c896" rev
0x06pci_mem_find: expected mem type 00000000, found 00000004
: ultra2 wide scsi, irq 11
CACHE TEST FAILED: host wrote 1, ncr read -15616.
CACHE TEST FAILED: ncr wrote 2, host read 1.
CACHE INCORRECTLY CONFIGURED.
ncr1 at pci1 dev 6 function 1 "Symbios Logic 53c896" rev
0x06pci_mem_find: expected mem type 00000000, found 00000004
: ultra2 wide scsi, irq 5
CACHE TEST FAILED: host wrote 1, ncr read -16892.
CACHE TEST FAILED: ncr wrote 2, host read 0.
CACHE INCORRECTLY CONFIGURED.
fxp0 at pci0 dev 2 function 0 "Intel 82557" rev 0x08: irq 9, address
00:d0:b7:e7:d7:32
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
fxp1 at pci0 dev 3 function 0 "Intel 82557" rev 0x08: irq 9, address
00:d0:b7:e7:c9:95
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 4
fxp2 at pci0 dev 4 function 0 "Intel 82557" rev 0x08: irq 9, address
00:10:83:fd:d3:35
inphy2 at fxp2 phy 1: i82555 10/100 media interface, rev. 4
vendor "ATI Technologies", unknown product 0x4759 (class display,
subclass VGA, rev 0x7a) at pci0 dev 5 function 0 not configured
"Reliance Computer ROSB4 SouthBridge" rev 0x4f at pci0 dev 15 function 0
not configured
pciide0 at pci0 dev 15 function 1 "Reliance Computer ROSB4 IDE" rev
0x00: DMA (unsupported), channel 0 configured to compatibility, channel
1 configured to compatibility
pciide0: channel 0 interrupting at irq 14
atapiscsi0 at pciide0 channel 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HITACHI, CDR-8435, 0010> SCSI0 5/cdrom
removable
cd0: can use 16-bit, PIO mode 4
pciide0: channel 1 ignored (not responding; disabled or no drives?)
isa0 at mainbus0
isadma0 at isa0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60/16 irq 1: vga 80 col, color, 8 scr, mf2-kbd
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 4860 netmask 4a60 ttymask 4a62
rd0: fixed, 3560 blocks
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02


-- 
volker_(_dot_)_kindermann_(_at_)_innominate_(_dot_)_com
consultant                                              innominate AG
                                                 the linux architects
tel: +49-6196-77798-31  fax: -77                   www.innominate.com