[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Fwd: OpenBSD 6/28 snapshot (ASUS A7V333) [kerndtr@kerndt.com]



On 06/29/04 21:41:51, rickie kerndt wrote:
usb issues with usb floppy on usb2 head (ehci0) only detected when
plugged in at boot.
An IOMEGA mem stick not detected on usb2 head. Both work as expected on
usb1 head.

OpenBSD 3.5-current (GENERIC) #190: Mon Jun 28 15:06:39 MDT 2004
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(TM) XP 2100+ ("AuthenticAMD" 686-class) 1.74 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV, 
PAT,PSE36,MMX,FXSR,SSE
real mem  = 1073307648 (1048152K)
avail mem = 987557888 (964412K)
using 4278 buffers containing 53768192 bytes (52508K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(85) BIOS, date 10/29/02, BIOS32 rev. 0 @
0xf17b0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x1e62
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf1d90/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C586 ISA" rev  
0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xd000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8366 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8366 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon 7500 QW" rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
cmpci0 at pci0 dev 5 function 0 "C-Media Electronics CMI8738/C3DX  
Audio"
rev 0x10: irq 10
audio0 at cmpci0
"Texas Instruments TSB43AB21 FireWire" rev 0x00 at pci0 dev 7 function  
0
not configured
uhci0 at pci0 dev 9 function 0 "VIA VT83C572 USB" rev 0x50: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 9 function 1 "VIA VT83C572 USB" rev 0x50: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 9 function 2 "VIA VT6202 USB 2.0" rev 0x51: irq 10
ehci0: EHCI version 0.95
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
dc0 at pci0 dev 15 function 0 "Lite-On PNIC-II" rev 0x25: irq 5,  
address
00:00:94:cc:69:46
dcphy0 at dc0 phy 31: internal PHY
pcib0 at pci0 dev 17 function 0 "VIA VT8233 ISA" rev 0x00
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y080L0>
wd0: 16-sector PIO, LBA, 78167MB, 160086528 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SONY, CD-ROM CDU5221, 0.35> SCSI0 5/ 
cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci2 at pci0 dev 17 function 2 "VIA VT83C572 USB" rev 0x23: irq 9
usb3 at uhci2: USB revision 1.0
uhub3 at usb3
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 17 function 3 "VIA VT83C572 USB" rev 0x23: irq 9
usb4 at uhci3: USB revision 1.0
uhub4 at usb4
uhub4: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ef45 netmask ef65 ttymask ffe7
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
ehci0: handing over full speed device on port 3 to uhci1
uhub2: port 3, device disappeared after reset
umass0 at uhub1 port 1 configuration 1 interface 0
umass0: MITSUMI MITSUMI USB FDD, rev 1.10/1.00, addr 2
umass0: using UFI over CBI
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <, , > SCSI0 0/direct fixed
sd0: 101520MB, 101520 cyl, 64 head, 32 sec, 512 bytes/sec, 207913170  
sec
total
umass0: at uhub1 port 1 (addr 2) disconnected
sd0 detached
scsibus1 detached
umass0 detached
umass0 at uhub3 port 2 configuration 1 interface 0
umass0: I0MEGA Mini128MB*IOM2B5, rev 2.00/0.71, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <I0MEGA, Mini128MB*IOM2B5, 2.00> SCSI0
0/direct removable
sd0: 124MB, 124 cyl, 64 head, 32 sec, 512 bytes/sec, 254464 sec total
umass0: at uhub3 port 2 (addr 2) disconnected
sd0 detached
scsibus1 detached
umass0 detached
uhub3: port error, restarting port 1
umass0 at uhub3 port 1 configuration 1 interface 0
umass0: MITSUMI MITSUMI USB FDD, rev 1.10/1.00, addr 2
umass0: using UFI over CBI
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <, , > SCSI0 0/direct fixed
sd0: 103185MB, 103185 cyl, 64 head, 32 sec, 512 bytes/sec, 211323858  
sec
total