[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Giga Byte GS-SR125EDL



After a cvs update and make kernel ... then reboot and make build ....  
we have

and yes .. I've just noticed the clock is completely out of whack ...  
that's now fixed, so it's not August 22nd but in fact it is

openbsd-1# date
Tue Jun 22 06:38:25 BST 2004



OpenBSD 3.5-current (GENERIC.MP) #0: Sun Aug 22 09:03:39 BST 2004
     root@openbsd-1.home.fido.net:/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(TM) CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu0:  
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, 
CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem  = 1073254400 (1048100K)
avail mem = 987512832 (964368K)
using 4278 buffers containing 53764096 bytes (52504K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(01) BIOS, date 10/03/03, BIOS32 rev. 0 @  
0xfd731
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xfd730/0x8d0
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdf20/192 (10 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0xffff product 0xffff
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000! 0xd0000/0x1a00!  
0xd2000/0x1800 0xd3800/0x1800 0xdf000/0x1000!
mainbus0: Intel MP Specification (Version 1.4) (Gigabyte 8EGPDR Pltfm)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 132 MHz
cpu1 at mainbus0: apid 6 (application processor)
cpu1: Intel Pentium 4 ("GenuineIntel" 686-class) 2.80 GHz
cpu1:  
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, 
CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type ISA
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 11, 16 pins
ioapic1 at mainbus0 apid 3: pa 0xfec01000, version 11, 16 pins
ioapic2 at mainbus0 apid 4: pa 0xfec02000, version 11, 16 pins
ioapic3 at mainbus0 apid 5: pa 0xfec03000, version 11, 16 pins
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CMIC_SL Host" rev 0x32
pchb1 at pci0 dev 0 function 1 "ServerWorks CMIC_SL Host" rev 0x00
pci1 at pchb1 bus 1
vga1 at pci0 dev 5 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pciide0 at pci0 dev 6 function 0 "ITExpress IT8212F" rev 0x10: DMA,  
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 3 int 14 (irq 7) for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y080P0>
wd0: 16-sector PIO, LBA, 78167MB, 160086528 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1 at pciide0 channel 1 drive 0: <Maxtor 6Y080P0>
wd1: 16-sector PIO, LBA, 78167MB, 160086528 sectors
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 6
pcib0 at pci0 dev 15 function 0 "ServerWorks CSB6 PCI" rev 0xa0
pciide1 at pci0 dev 15 function 1 "ServerWorks CSB6 IDE" rev 0xa0: DMA
atapiscsi0 at pciide1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MITSUMI, CD-ROM SR244W, T01A> SCSI0  
5/cdrom removable
cd0(pciide1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
ohci0 at pci0 dev 15 function 2 "ServerWorks CSB6 USB" rev 0x05: apic 2  
int 9 (irq 9), version 1.0, legacy support
ohci0: SMM does not respond, resetting
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ServerWorks OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pchb2 at pci0 dev 15 function 3 "ServerWorks CSB6 LPC" rev 0x00
pchb3 at pci0 dev 16 function 0 "ServerWorks CIOB-E" rev 0x12
pchb4 at pci0 dev 16 function 2 "ServerWorks CIOB-E" rev 0x12
pci2 at pchb4 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5704C" rev 0x02: apic 2 int  
11 (irq 11): address: 00:0d:61:15:6e:0e
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseTX PHY, rev. 0
bge1 at pci2 dev 0 function 1 "Broadcom BCM5704C" rev 0x02: apic 2 int  
10 (irq 10): address: 00:0d:61:15:6e:0f
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseTX PHY, rev. 0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask 0 netmask 0 ttymask 0
pctr: user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
wd1: no disk label
dkcsum: wd1 matched BIOS disk 81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
apm0: disconnected
cpu1: starting
cpu1: CPU at apid 6 running
openbsd-1#

On 22 Jun 2004, at 00:11, Jon Morby wrote:

> Ok,
>
> Well the good news is a pxeboot worked a treat, and we currently have  
> it up on 1 CPU.  I'm fetching -current so I can build an  
> up-to-the-minute kernel and will report back once this is done  
> (possibly tomorrow now considering the time, and pizza is en route :)
>
> If there's any interest ... the dmesg is below (if not, I apologise  
> for the use of bandwidth :)
>
> OpenBSD 3.5-current (GENERIC) #141: Mon Jun 14 12:25:01 MDT 2004
>     deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Xeon(TM) CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
> cpu0:  
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36 
> ,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
> real mem  = 1073254400 (1048100K)
> avail mem = 987570176 (964424K)
> using 4278 buffers containing 53764096 bytes (52504K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(01) BIOS, date 10/03/03, BIOS32 rev. 0 @  
> 0xfd731
> apm0 at bios0: Power Management spec V1.2
> apm0: AC on, battery charge unknown
> pcibios0 at bios0: rev. 2.1 @ 0xfd730/0x8d0
> pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdf20/192 (10 entries)
> pcibios0: no compatible PCI ICU found: ICU vendor 0xffff product 0xffff
> pcibios0: PCI bus #0 is the last bus
> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000! 0xd0000/0x1a00!  
> 0xd2000/0x1800 0xd3800/0x1800 0xdf000/0x1000!
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "ServerWorks CMIC_SL Host" rev 0x32
> pchb1 at pci0 dev 0 function 1 "ServerWorks CMIC_SL Host" rev 0x00
> pci1 at pchb1 bus 1
> vga1 at pci0 dev 5 function 0 "ATI Rage XL" rev 0x27
> wsdisplay0 at vga1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> pciide0 at pci0 dev 6 function 0 "ITExpress IT8212F" rev 0x10: DMA,  
> channel 0 wired to native-PCI, channel 1 wired to native-PCI
> pciide0: using irq 7 for native-PCI interrupt
> wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y080P0>
> wd0: 16-sector PIO, LBA, 78167MB, 160086528 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
> wd1 at pciide0 channel 1 drive 0: <Maxtor 6Y080P0>
> wd1: 16-sector PIO, LBA, 78167MB, 160086528 sectors
> wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 6
> pcib0 at pci0 dev 15 function 0 "ServerWorks CSB6 PCI" rev 0xa0
> pciide1 at pci0 dev 15 function 1 "ServerWorks CSB6 IDE" rev 0xa0: DMA
> atapiscsi0 at pciide1 channel 0 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <MITSUMI, CD-ROM SR244W, T01A> SCSI0  
> 5/cdrom removable
> cd0(pciide1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
> ohci0 at pci0 dev 15 function 2 "ServerWorks CSB6 USB" rev 0x05: irq  
> 9, version 1.0, legacy support
> ohci0: SMM does not respond, resetting
> usb0 at ohci0: USB revision 1.0
> uhub0 at usb0
> uhub0: ServerWorks OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 4 ports with 4 removable, self powered
> pchb2 at pci0 dev 15 function 3 "ServerWorks CSB6 LPC" rev 0x00
> pchb3 at pci0 dev 16 function 0 "ServerWorks CIOB-E" rev 0x12
> pchb4 at pci0 dev 16 function 2 "ServerWorks CIOB-E" rev 0x12
> pci2 at pchb4 bus 2
> bge0 at pci2 dev 0 function 0 "Broadcom BCM5704C" rev 0x02: irq 11:  
> address: 00:0d:61:15:6e:0e
> brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseTX PHY, rev. 0
> bge1 at pci2 dev 0 function 1 "Broadcom BCM5704C" rev 0x02: irq 10:  
> address: 00:0d:61:15:6e:0f
> brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseTX PHY, rev. 0
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> sysbeep0 at pcppi0
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> biomask f3e5 netmask ffe5 ttymask ffe7
> pctr: user-level cycle counter enabled
> dkcsum: wd0 matched BIOS disk 80
> wd1: no disk label
> dkcsum: wd1 matched BIOS disk 81
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
>
> and bsd.mp
>
> OpenBSD 3.5-current (GENERIC.MP) #2: Mon Jun 14 12:43:47 MDT 2004
>     deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel(R) Xeon(TM) CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
> cpu0:  
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36 
> ,CFLUSH,ACPI,MMX,FXSR
> real mem  = 1073254400 (1048100K)
> avail mem = 987512832 (964368K)
> using 4278 buffers containing 53764096 bytes (52504K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(01) BIOS, date 10/03/03, BIOS32 rev. 0 @  
> 0xfd731
> apm0 at bios0: Power Management spec V1.2
> apm0: AC on, battery charge unknown
> pcibios0 at bios0: rev. 2.1 @ 0xfd730/0x8d0
> pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdf20/192 (10 entries)
> pcibios0: no compatible PCI ICU found: ICU vendor 0xffff product 0xffff
> pcibios0: PCI bus #0 is the last bus
> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000! 0xd0000/0x1a00!  
> 0xd2000/0x1800 0xd3800/0x1800 0xdf
> mainbus0: scanning 0x9ec00 to 0x9eff0 for MP signature
> mainbus0: scanning 0x9e400 to 0x9e7f0 for MP signature
> mainbus0: scanning 0xf0000 to 0xffff0 for MP signature
> mainbus0: MP floating pointer found in bios at 0xf71a0
> mainbus0: MP config table at 0x9f170, 316 bytes long
> mainbus0: Intel MP Specification (Version 1.4) (Gigabyte 8EGPDR Pltfm)
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: calibrating local timer
> cpu0: apic clock running at 132 MHz
> cpu0: kstack at 0xe8229000 for 8192 bytes
> cpu0: idle pcb at 0xe8229000, idle sp at 0xe822afa0
> cpu1 at mainbus0: apid 6 (application processor)
> cpu1: Intel Pentium 4 ("GenuineIntel" 686-class) 2.80 GHz
> cpu1:  
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36 
> ,CFLUSH,ACPI,MMX,FXSR
> cpu1: kstack at 0xe822b000 for 8192 bytes
> cpu1: idle pcb at 0xe822b000, idle sp at 0xe822cfa0
> mainbus0: bus 0 is type PCI
> mainbus0: bus 1 is type PCI
> mainbus0: bus 2 is type PCI
> mainbus0: bus 3 is type ISA
> ioapic0 at mainbus0 apid 2: pa 0xfec00000, virtual wire mode, version  
> 11, 16 pins
> ioapic1 at mainbus0 apid 3: pa 0xfec01000, virtual wire mode, version  
> 11, 16 pins
> ioapic2 at mainbus0 apid 4: pa 0xfec02000, virtual wire mode, version  
> 11, 16 pins
> ioapic3 at mainbus0 apid 5: pa 0xfec03000, virtual wire mode, version  
> 11, 16 pins
> ioapic0: int0 attached to ExtINT (type 0x3 flags 0x5)
> ioapic0: int1 attached to isa0 irq 1 (type 0x0 flags 0x5)
> ioapic0: int2 attached to isa0 irq 0 (type 0x0 flags 0x5)
> ioapic0: int3 attached to isa0 irq 3 (type 0x0 flags 0x5)
> ioapic0: int4 attached to isa0 irq 4 (type 0x0 flags 0x5)
> ioapic0: int5 attached to isa0 irq 5 (type 0x0 flags 0x5)
> ioapic0: int6 attached to isa0 irq 6 (type 0x0 flags 0x5)
> ioapic0: int7 attached to isa0 irq 7 (type 0x0 flags 0xf)
> ioapic0: int8 attached to isa0 irq 8 (type 0x0 flags 0x5)
> ioapic0: int9 attached to pci0 device 15 INT_A (type 0x0 flags 0xf)
> ioapic0: int10 attached to isa0 irq 10 (type 0x0 flags 0xf)
> ioapic0: int11 attached to isa0 irq 11 (type 0x0 flags 0xf)
> ioapic0: int12 attached to isa0 irq 12 (type 0x0 flags 0x5)
> ioapic0: int13 attached to isa0 irq 13 (type 0x0 flags 0x5)
> ioapic0: int14 attached to isa0 irq 14 (type 0x0 flags 0x5)
> ioapic0: int15 attached to isa0 irq 15 (type 0x0 flags 0x5)
> ioapic1: int3 attached to pci0 device 5 INT_A (type 0x0 flags 0xf)
> ioapic1: int14 attached to pci0 device 6 INT_A (type 0x0 flags 0xf)
> ioapic0: int9 attached to pci0 device 15 INT_A (type 0x0 flags 0xf)
> local apic: int0 attached to ExtINT (type 0x3 flags 0x5)
> local apic: int1 attached to NMI (type 0x1 flags 0x5)
> mainbus0: MP WARNING: 236 bytes of extended entries not examined
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "ServerWorks CMIC_SL Host" rev 0x32
> pchb1 at pci0 dev 0 function 1 "ServerWorks CMIC_SL Host" rev 0x00
> pci1 at pchb1 bus 1
> vga1 at pci0 dev 5 function 0 "ATI Rage XL" rev 0x27
> wsdisplay0 at vga1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> pciide0 at pci0 dev 6 function 0 "ITExpress IT8212F" rev 0x10: DMA,  
> channel 0 wired to native-PCI,
> pciide0: using apic 3 int 14 (irq 7) for native-PCI interrupt
> wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y080P0>
> wd0: 16-sector PIO, LBA, 78167MB, 160086528 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
> wd1 at pciide0 channel 1 drive 0: <Maxtor 6Y080P0>
> wd1: 16-sector PIO, LBA, 78167MB, 160086528 sectors
> wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 6
> pcib0 at pci0 dev 15 function 0 "ServerWorks CSB6 PCI" rev 0xa0
> pciide1 at pci0 dev 15 function 1 "ServerWorks CSB6 IDE" rev 0xa0: DMA
> atapiscsi0 at pciide1 channel 0 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <MITSUMI, CD-ROM SR244W, T01A> SCSI0  
> 5/cdrom removable
> cd0(pciide1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
> ohci0 at pci0 dev 15 function 2 "ServerWorks CSB6 USB" rev 0x05: apic  
> 2 int 9 (irq 9), version 1.0
> ohci0: SMM does not respond, resetting
> usb0 at ohci0: USB revision 1.0
> uhub0 at usb0
> uhub0: ServerWorks OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 4 ports with 4 removable, self powered
> pchb2 at pci0 dev 15 function 3 "ServerWorks CSB6 LPC" rev 0x00
> pchb3 at pci0 dev 16 function 0 "ServerWorks CIOB-E" rev 0x12
> pchb4 at pci0 dev 16 function 2 "ServerWorks CIOB-E" rev 0x12
> pci2 at pchb4 bus 2
> bge0 at pci2 dev 0 function 0 "Broadcom BCM5704C" rev 0x02: apic 2 int  
> 11 (irq 11): address: 00:0d
> brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseTX PHY, rev. 0
> bge1 at pci2 dev 0 function 1 "Broadcom BCM5704C" rev 0x02: apic 2 int  
> 10 (irq 10): address: 00:0d
> brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseTX PHY, rev. 0
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> sysbeep0 at pcppi0
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> biomask 0 netmask 0 ttymask 0
> ioapic3: enabling
> ioapic3: int0 0x10000 0x0
> ioapic3: int1 0x10000 0x0
> ioapic3: int2 0x10000 0x0
> ioapic3: int3 0x10000 0x0
> ioapic3: int4 0x10000 0x0
> ioapic3: int5 0x10000 0x0
> ioapic3: int6 0x10000 0x0
> ioapic3: int7 0x10000 0x0
> ioapic3: int8 0x10000 0x0
> ioapic3: int9 0x10000 0x0
> ioapic3: int10 0x10000 0x0
> ioapic3: int11 0x10000 0x0
> ioapic3: int12 0x10000 0x0
> ioapic3: int13 0x10000 0x0
> ioapic3: int14 0x10000 0x0
> ioapic3: int15 0x10000 0x0
> ioapic2: enabling
> ioapic2: int0 0x10000 0x0
> ioapic2: int1 0x10000 0x0
> ioapic2: int2 0x10000 0x0
> ioapic2: int3 0x10000 0x0
> ioapic2: int4 0x10000 0x0
> ioapic2: int5 0x10000 0x0
> ioapic2: int6 0x10000 0x0
> ioapic2: int7 0x10000 0x0
> ioapic2: int8 0x10000 0x0
> ioapic2: int9 0x10000 0x0
> ioapic2: int10 0x10000 0x0
> ioapic2: int11 0x10000 0x0
> ioapic2: int12 0x10000 0x0
> ioapic2: int13 0x10000 0x0
> ioapic2: int14 0x10000 0x0
> ioapic2: int15 0x10000 0x0
> ioapic1: enabling
> ioapic1: int0 0x10000 0x0
> ioapic1: int1 0x10000 0x0
> ioapic1: int2 0x10000 0x0
> ioapic1: int3 0x1a100 0x0
> ioapic1: int4 0x10000 0x0
> ioapic1: int5 0x10000 0x0
> ioapic1: int6 0x10000 0x0
> ioapic1: int7 0x10000 0x0
> ioapic1: int8 0x10000 0x0
> ioapic1: int9 0x10000 0x0
> ioapic1: int10 0x10000 0x0
> ioapic1: int11 0x10000 0x0
> ioapic1: int12 0x10000 0x0
> ioapic1: int13 0x10000 0x0
> ioapic1: int14 0xa140 0x0
> ioapic1: int15 0x10000 0x0
> ioapic0: enabling
> ioapic0: int0 0x10700 0x0
> ioapic0: int1 0x170 0x0
> ioapic0: int2 0x10100 0x0
> ioapic0: int3 0x1b0 0x0
> ioapic0: int4 0x1b1 0x0
> ioapic0: int5 0x10100 0x0
> ioapic0: int6 0x141 0x0
> ioapic0: int7 0x1a100 0x0
> ioapic0: int8 0x10100 0x0
> ioapic0: int9 0xa142 0x0
> ioapic0: int10 0xa150 0x0
> ioapic0: int11 0xa151 0x0
> ioapic0: int12 0x10100 0x0
> ioapic0: int13 0x10100 0x0
> ioapic0: int14 0x143 0x0
> ioapic0: int15 0x144 0x0
> pctr: user-level cycle counter enabled
> dkcsum: wd0 matched BIOS disk 80
> wd1: no disk label
> dkcsum: wd1 matched BIOS disk 81
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> WARNING: / was not properly unmounted
> apm0: disconnected
> cpu1: starting, init idle stack ptr is 0xe822cfa0
> cpu1: CPU 6 running
> openbsd-1#
>
>
>
> On 21 Jun 2004, at 03:54, Nick Holland wrote:
>
>> Jon Morby wrote:
>>
>>> I've taken both a current snapshot and a release snapshot of 3.5's  
>>> boot  CD and tried to boot them on one of the boxes we have here,  
>>> but I get  "ERR X" before boot even starts.
>>
>>> Any suggestions gratefully received!
>>
>> What is it you are trying to boot the CDs in? (yes, a CDROM drive,  
>> but how
>> is it attached?)
>>
>> The ERR X coming from a CD boot is SO unrelated to the day-to-day  
>> booting
>> of OpenBSD that I would not jump to any conclusions about the  
>> compatability
>> of OpenBSD and the box based on this (there may be an issue with USB  
>> CDROM
>> drives and booting OpenBSD).  Just use some other install technique,
>> such as floppy, pxeboot, or even moving the drive to another computer  
>> to
>> get around it.  Once you have a basic OpenBSD install in place, you  
>> can then
>> do bsd.rd upgrades and reinstalls.
>>
>> BTW: if you already have this machine in hand as you seem to, DO THIS
>> IMMEDIATELY, I don't mean next week, tomorrow at the latest.  This  
>> could be
>> a really good time to deal with any issues IF there are any with this  
>> system.
>>
>> Nick.
>> -- 
>> http://www.holland-consulting.net
>>
>>
> Kindest Regards
>
> Jon Morby
>
> fax to email service -  register at http://www.fido.net/fax2email/
> and for all your telecom needs - http://www.fidotelecom.com/
> -- 
> FidoNet Registration Services Ltd                    tel: 08714 333 666
> fido.net - the internet made simple!                  fax: 08714 334  
> 000
>
>
Kindest Regards

Jon Morby

fax to email service -  register at http://www.fido.net/fax2email/
and for all your telecom needs - http://www.fidotelecom.com/
-- 
FidoNet Registration Services Ltd                    tel: 08714 333 666
fido.net - the internet made simple!                  fax: 08714 334 000