[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

SMP on Intel Xeon



bsd boots fine. It's running httpd and X.
bsd.mp boots, but after the legend 'starting network' the following message
appear:

ahc1: Timedout SCB already complete. Interrupts may not be functioning.

and gets repeated ad infinitum.


-------------- bsd.mp dmesg --------------
OpenBSD 3.5-current (GENERIC.MP) #8: Wed Jun 16 16:30:26 MDT 2004
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(TM) CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem  = 1072717824 (1047576K)
avail mem = 987009024 (963876K)
using 4278 buffers containing 53739520 bytes (52480K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(42) BIOS, date 08/29/03, BIOS32 rev. 0 @ 0xfd6e0
pcibios0 at bios0: rev. 2.1 @ 0xfd6e0/0x920
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfde80/352 (20 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x8086 product 0x2480
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4800 0xe3000/0x1000!
mainbus0: scanning 0x9b800 to 0x9bbf0 for MP signature
mainbus0: scanning 0x9b400 to 0x9b7f0 for MP signature
mainbus0: scanning 0xf0000 to 0xffff0 for MP signature
mainbus0: MP floating pointer found in bios at 0xf64d0
mainbus0: MP config table at 0x9bd70, 332 bytes long
mainbus0: Intel MP Specification (Version 1.4) (            SE7501CW2)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: calibrating local timer
cpu0: apic clock running at 132 MHz
cpu0: kstack at 0xe8226000 for 8192 bytes
cpu0: idle pcb at 0xe8226000, idle sp at 0xe8227fa0
cpu1 at mainbus0: apid 6 (application processor)
cpu1: Intel Pentium 4 ("GenuineIntel" 686-class) 2.80 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF
cpu1: kstack at 0xe8228000 for 8192 bytes
cpu1: idle pcb at 0xe8228000, idle sp at 0xe8229fa0
mainbus0: bus 0 is type PCI   
mainbus0: bus 1 is type PCI   
mainbus0: bus 2 is type PCI   
mainbus0: bus 3 is type PCI   
mainbus0: bus 4 is type PCI   
mainbus0: bus 5 is type ISA   
ioapic0 at mainbus0 apid 2: pa 0xfec00000, virtual wire mode, version 20, 24 pins
ioapic1 at mainbus0 apid 3: pa 0xfec80000, virtual wire mode, version 20, 24 pins
ioapic2 at mainbus0 apid 4: pa 0xfec80400, virtual wire mode, version 20, 24 pins
ioapic0: int0 attached to ExtINT (type 0x3 flags 0x5)
ioapic0: int1 attached to isa0 irq 1 (type 0x0 flags 0x5)
ioapic0: int2 attached to isa0 irq 0 (type 0x0 flags 0x5)
ioapic0: int3 attached to isa0 irq 3 (type 0x0 flags 0x5)
ioapic0: int4 attached to isa0 irq 4 (type 0x0 flags 0x5)
ioapic0: int19 attached to pci0 device 29 INT_B (type 0x0 flags 0xf)
ioapic0: int6 attached to isa0 irq 6 (type 0x0 flags 0x5)
ioapic0: int7 attached to isa0 irq 7 (type 0x0 flags 0x5)
ioapic0: int8 attached to isa0 irq 8 (type 0x0 flags 0x5)
ioapic0: int9 attached to isa0 irq 9 (type 0x0 flags 0x5)
ioapic0: int16 attached to pci0 device 29 INT_A (type 0x0 flags 0xf)
ioapic0: int17 attached to pci4 device 1 INT_A (type 0x0 flags 0xf)
ioapic0: int12 attached to isa0 irq 12 (type 0x0 flags 0x5)
ioapic0: int13 attached to isa0 irq 13 (type 0x0 flags 0x5)
ioapic0: int14 attached to isa0 irq 14 (type 0x0 flags 0x5)
ioapic0: int15 attached to isa0 irq 15 (type 0x0 flags 0x5)
ioapic0: int18 attached to pci0 device 29 INT_C (type 0x0 flags 0xf)
ioapic0: int21 attached to pci4 device 3 INT_A (type 0x0 flags 0xf)
ioapic0: int20 attached to pci4 device 4 INT_A (type 0x0 flags 0xf)
ioapic0: int23 attached to pci4 device 5 INT_A (type 0x0 flags 0xf)
local apic: int0 attached to ExtINT (type 0x3 flags 0x5)
local apic: int1 attached to NMI (type 0x1 flags 0x5)
mainbus0: MP WARNING: 144 bytes of extended entries not examined
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x254c rev 0x01
"Intel E7500 DRAM" rev 0x01 at pci0 dev 0 function 1 not configured
ppb0 at pci0 dev 2 function 0 "Intel E7500 MCH HI_B vppb 1" rev 0x01
pci1 at ppb0 bus 1
"Intel P64H2 IOxAPIC" rev 0x04 at pci1 dev 28 function 0 not configured
ppb1 at pci1 dev 29 function 0 "Intel 82870P2 P64H2 PCI-PCI" rev 0x04
pci2 at ppb1 bus 2
"Intel P64H2 IOxAPIC" rev 0x04 at pci1 dev 30 function 0 not configured
ppb2 at pci1 dev 31 function 0 "Intel 82870P2 P64H2 PCI-PCI" rev 0x04
pci3 at ppb2 bus 3
"Intel E7500 MCH HI_B vppb 2" rev 0x01 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x02: apic 2 int 16 (irq 10)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801CA/CAM USB" rev 0x02: apic 2 int 19 (irq 5)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801CA/CAM USB" rev 0x02: apic 2 int 18 (irq 10)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ppb3 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x42
pci4 at ppb3 bus 4
ahc1 at pci4 dev 1 function 0 "Adaptec AHA-2940U" rev 0x01: apic 2 int 17 (irq 11)
scsibus0 at ahc1: 16 targets
sd0 at scsibus0 targ 1 lun 0: <SEAGATE, ST373453LW, 0003> SCSI3 0/direct fixed
sd0: 70007MB, 31310 cyl, 8 head, 572 sec, 512 bytes/sec, 143374744 sec total
sd1 at scsibus0 targ 2 lun 0: <SEAGATE, ST373453LW, 0003> SCSI3 0/direct fixed
sd1: 70007MB, 31310 cyl, 8 head, 572 sec, 512 bytes/sec, 143374744 sec total
vga1 at pci4 dev 3 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
fxp0 at pci4 dev 4 function 0 "Intel 82557" rev 0x0d: apic 2 int 20 (irq 11), address 00:02:b3:e9:3e:4b
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
em0 at pci4 dev 5 function 0 "Intel PRO/1000MT (82540EM)" rev 0x02: apic 2 int 23 (irq 10), address: 00:02:b3:e9:3e:98
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CA LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801CA IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <LITE-ON, LTR-52327S, QS06> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
"Intel 82801CA/CAM SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 0 netmask 0 ttymask 0
ioapic2: enabling
ioapic2: int0 0x10000 0x0
ioapic2: int1 0x10000 0x0
ioapic2: int2 0x10000 0x0
ioapic2: int3 0x10000 0x0
ioapic2: int4 0x10000 0x0
ioapic2: int5 0x10000 0x0
ioapic2: int6 0x10000 0x0
ioapic2: int7 0x10000 0x0
ioapic2: int8 0x10000 0x0
ioapic2: int9 0x10000 0x0
ioapic2: int10 0x10000 0x0
ioapic2: int11 0x10000 0x0
ioapic2: int12 0x10000 0x0
ioapic2: int13 0x10000 0x0
ioapic2: int14 0x10000 0x0
ioapic2: int15 0x10000 0x0
ioapic2: int16 0x10000 0x0
ioapic2: int17 0x10000 0x0
ioapic2: int18 0x10000 0x0
ioapic2: int19 0x10000 0x0
ioapic2: int20 0x10000 0x0
ioapic2: int21 0x10000 0x0
ioapic2: int22 0x10000 0x0
ioapic2: int23 0x10000 0x0
ioapic1: enabling
ioapic1: int0 0x10000 0x0
ioapic1: int1 0x10000 0x0
ioapic1: int2 0x10000 0x0
ioapic1: int3 0x10000 0x0
ioapic1: int4 0x10000 0x0
ioapic1: int5 0x10000 0x0
ioapic1: int6 0x10000 0x0
ioapic1: int7 0x10000 0x0
ioapic1: int8 0x10000 0x0
ioapic1: int9 0x10000 0x0
ioapic1: int10 0x10000 0x0
ioapic1: int11 0x10000 0x0
ioapic1: int12 0x10000 0x0
ioapic1: int13 0x10000 0x0
ioapic1: int14 0x10000 0x0
ioapic1: int15 0x10000 0x0
ioapic1: int16 0x10000 0x0
ioapic1: int17 0x10000 0x0
ioapic1: int18 0x10000 0x0
ioapic1: int19 0x10000 0x0
ioapic1: int20 0x10000 0x0
ioapic1: int21 0x10000 0x0
ioapic1: int22 0x10000 0x0
ioapic1: int23 0x10000 0x0
ioapic0: enabling
ioapic0: int0 0x10700 0x0
ioapic0: int1 0x170 0x0
ioapic0: int2 0x10100 0x0
ioapic0: int3 0x1b0 0x0
ioapic0: int4 0x1b1 0x0
ioapic0: int5 0x10000 0x0
ioapic0: int6 0x140 0x0
ioapic0: int7 0x171 0x0
ioapic0: int8 0x10100 0x0
ioapic0: int9 0x10100 0x0
ioapic0: int10 0x10000 0x0
ioapic0: int11 0x10000 0x0
ioapic0: int12 0x172 0x0
ioapic0: int13 0x10100 0x0
ioapic0: int14 0x141 0x0
ioapic0: int15 0x10100 0x0
ioapic0: int16 0xa142 0x0
ioapic0: int17 0xa143 0x0
ioapic0: int18 0xa144 0x0
ioapic0: int19 0xa145 0x0
ioapic0: int20 0xa150 0x0
ioapic0: int21 0x1a100 0x0
ioapic0: int22 0x10000 0x0
ioapic0: int23 0xa151 0x0
pctr: user-level cycle counter enabled
ahc1: target 1 using 16bit transfers
ahc1: target 1 synchronous at 20.0MHz, offset = 0x8
dkcsum: sd0 matched BIOS disk 80
ahc1: target 2 using 16bit transfers
ahc1: target 2 synchronous at 20.0MHz, offset = 0x8
dkcsum: sd1 matched BIOS disk 81
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
cpu1: starting, init idle stack ptr is 0xe8229fa0
cpu1: CPU at apic 6 running

-------------- bsd dmesg --------------
OpenBSD 3.5-current (GENERIC) #154: Wed Jun 16 16:11:22 MDT 2004
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem  = 1072717824 (1047576K)
avail mem = 987062272 (963928K)
using 4278 buffers containing 53739520 bytes (52480K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(42) BIOS, date 08/29/03, BIOS32 rev. 0 @ 0xfd6e0
pcibios0 at bios0: rev. 2.1 @ 0xfd6e0/0x920
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfde80/352 (20 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x8086 product 0x2480
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4800 0xe3000/0x1000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x254c rev 0x01
"Intel E7500 DRAM" rev 0x01 at pci0 dev 0 function 1 not configured
ppb0 at pci0 dev 2 function 0 "Intel E7500 MCH HI_B vppb 1" rev 0x01
pci1 at ppb0 bus 1
"Intel P64H2 IOxAPIC" rev 0x04 at pci1 dev 28 function 0 not configured
ppb1 at pci1 dev 29 function 0 "Intel 82870P2 P64H2 PCI-PCI" rev 0x04
pci2 at ppb1 bus 2
"Intel P64H2 IOxAPIC" rev 0x04 at pci1 dev 30 function 0 not configured
ppb2 at pci1 dev 31 function 0 "Intel 82870P2 P64H2 PCI-PCI" rev 0x04
pci3 at ppb2 bus 3
"Intel E7500 MCH HI_B vppb 2" rev 0x01 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x02: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801CA/CAM USB" rev 0x02: irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801CA/CAM USB" rev 0x02: irq 10
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ppb3 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x42
pci4 at ppb3 bus 4
ahc1 at pci4 dev 1 function 0 "Adaptec AHA-2940U" rev 0x01: irq 11
scsibus0 at ahc1: 16 targets
sd0 at scsibus0 targ 1 lun 0: <SEAGATE, ST373453LW, 0003> SCSI3 0/direct fixed
sd0: 70007MB, 31310 cyl, 8 head, 572 sec, 512 bytes/sec, 143374744 sec total
sd1 at scsibus0 targ 2 lun 0: <SEAGATE, ST373453LW, 0003> SCSI3 0/direct fixed
sd1: 70007MB, 31310 cyl, 8 head, 572 sec, 512 bytes/sec, 143374744 sec total
vga1 at pci4 dev 3 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
fxp0 at pci4 dev 4 function 0 "Intel 82557" rev 0x0d: irq 11, address 00:02:b3:e9:3e:4b
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
em0 at pci4 dev 5 function 0 "Intel PRO/1000MT (82540EM)" rev 0x02: irq 10, address: 00:02:b3:e9:3e:98
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CA LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801CA IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <LITE-ON, LTR-52327S, QS06> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
"Intel 82801CA/CAM SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ef65 netmask ef65 ttymask ffe7
pctr: user-level cycle counter enabled
ahc1: target 1 using 16bit transfers
ahc1: target 1 synchronous at 20.0MHz, offset = 0x8
dkcsum: sd0 matched BIOS disk 80
ahc1: target 2 using 16bit transfers
ahc1: target 2 synchronous at 20.0MHz, offset = 0x8
dkcsum: sd1 matched BIOS disk 81
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02

-- 
Gerardo Santana Gómez Garrido
http://www.openbsd.org.mx/~santana/
"Between people, as among nations, respect of each other's rights insures
the peace." -Don Benito Juárez