IBM x345 bsd.mp hangs hard

[Stefan Kaltenbrunner <mm-mailinglist@madness.at>]

using the latest snapshot I get the following

bsd works (dmesg follows), bsd.mp hangs hard right after detecting the 
SCSI-devices (mpt-fusion RAID1). machine in question is an IBM x345 2HE 
Server with a single 2,66Mhz XEON CPU(HT disabled), (this machine is 
Dual-CPU capable but no secondary CPU installed).


Stefan


OpenBSD 3.5-current (GENERIC) #140: Sun Jun 13 19:14:01 MDT 2004
     deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem  = 2683777024 (4293393868K)
avail mem = 2480164864 (2422036K)
using 4278 buffers containing 134291456 bytes (131144K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(ff) BIOS, date 04/08/04, BIOS32 rev. 0 @ 0xfd7a1
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xffff
pcibios0: PCI BIOS has 11 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 9 10 11 15
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1800 0xc9800/0x4000 0xcd800/0x200
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20-HE" rev 0x33
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20-HE" rev 0x00
pci1 at pchb1 bus 2
pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20-HE" rev 0x00
pci2 at pchb2 bus 6
isp0 at pci2 dev 1 function 0 vendor "QLogic", unknown product 0x2312 
rev 0x02: irq 10
isp0: Polled Mailbox Command (0x2) Timeout
isp0: Polled Mailbox Command (0x8) Timeout
em0 at pci2 dev 8 function 0 "Intel PRO/1000MT Dual Port (82546EB)" rev 
0x01: irq 11, address: 00:09:6b:89:40:64
em1 at pci2 dev 8 function 1 "Intel PRO/1000MT Dual Port (82546EB)" rev 
0x01: irq 3, address: 00:09:6b:89:40:65
vga1 at pci0 dev 6 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pchb3 at pci0 dev 15 function 0 "ServerWorks CSB5 SouthBridge" rev 0x93
pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 2.9B> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05: 
irq 11, version 1.0, legacy support
ohci0: SMM does not respond, resetting
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ServerWorks OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib0 at pci0 dev 15 function 3 "ServerWorks CSB5 PCI" rev 0x00
pchb4 at pci0 dev 16 function 0 "ServerWorks CIOBX2" rev 0x05
pchb5 at pci0 dev 16 function 2 "ServerWorks CIOBX2" rev 0x05
pci3 at pchb5 bus 4
isp1 at pci3 dev 4 function 0 vendor "QLogic", unknown product 0x2312 
rev 0x02: irq 3
isp1: Polled Mailbox Command (0x2) Timeout
isp1: Polled Mailbox Command (0x8) Timeout
pchb6 at pci0 dev 17 function 0 "ServerWorks CIOBX2" rev 0x05
pchb7 at pci0 dev 17 function 2 "ServerWorks CIOBX2" rev 0x05
pci4 at pchb7 bus 8
mpt0 at pci4 dev 7 function 0 "Symbios Logic 53c1030" rev 0x07: irq 9
mpt0: sending FW Upload request to IOC (size: 36, img size: 67560)
scsibus1 at mpt0: 16 targets
sd0 at scsibus1 targ 0 lun 0: <LSILOGIC, 1030 IM, 1000> SCSI2 0/direct fixed
sd0: 34678MB, 34679 cyl, 16 head, 127 sec, 512 bytes/sec, 71020545 sec total
mpt0: target 0 Synchronous at 80MHz width 16bit offset 127 QAS 0 DT 1 IU 0
mpt1 at pci4 dev 7 function 1 "Symbios Logic 53c1030" rev 0x07: irq 9
mpt1: sending FW Upload request to IOC (size: 36, img size: 67560)
scsibus2 at mpt1: 16 targets
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask efed netmask efed ttymask ffef
pctr: user-level cycle counter enabled
dkcsum: sd0 matched BIOS disk 80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02



OpenBSD 3.5-current (GENERIC.MP) #1: Sun Jun 13 19:33:11 MDT 2004
     deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(TM) CPU 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem  = 2683777024 (4293393868K)
avail mem = 2480111616 (2421984K)
using 4278 buffers containing 134291456 bytes (131144K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(ff) BIOS, date 04/08/04, BIOS32 rev. 0 @ 0xfd7a1
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xffff
pcibios0: PCI BIOS has 11 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 9 10 11 15
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1800 0xc9800/0x4000 0xcd800/0x200
mainbus0: scanning 0x9d800 to 0x9dbf0 for MP signature
mainbus0: MP floating pointer found in extended bios data area at 0x9d940
mainbus0: MP config table at 0x9e6a0, 320 bytes long
mainbus0: Intel MP Specification (Version 1.4) (IBM ENSW GEODE SMP   )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: calibrating local timer
cpu0: apic clock running at 133 MHz
cpu0: kstack at 0xea5bd000 for 8192 bytes
cpu0: idle pcb at 0xea5bd000, idle sp at 0xea5befa0
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type PCI
mainbus0: bus 5 is type PCI
mainbus0: bus 6 is type PCI
mainbus0: bus 7 is type PCI
mainbus0: bus 8 is type PCI
mainbus0: bus 9 is type ISA
ioapic0 at mainbus0 apid 14: pa 0xfec00000, virtual wire mode, version 
11, 16 pins
ioapic1 at mainbus0 apid 13: pa 0xfec01000, virtual wire mode, version 
11, 16 pins
ioapic2 at mainbus0 apid 12: pa 0xfec02000, virtual wire mode, version 
11, 16 pins
ioapic0: int1 attached to isa0 irq 1 (type 0x0 flags 0x0)
ioapic0: int2 attached to isa0 irq 0 (type 0x0 flags 0x0)
ioapic0: int4 attached to isa0 irq 4 (type 0x0 flags 0x0)
ioapic0: int6 attached to isa0 irq 6 (type 0x0 flags 0x0)
ioapic0: int8 attached to isa0 irq 8 (type 0x0 flags 0x0)
ioapic0: int12 attached to isa0 irq 12 (type 0x0 flags 0x0)
ioapic0: int13 attached to isa0 irq 13 (type 0x0 flags 0x0)
ioapic0: int14 attached to isa0 irq 14 (type 0x0 flags 0x0)
ioapic0: int15 attached to isa0 irq 15 (type 0x0 flags 0x0)
ioapic1: int10 attached to pci0 device 6 INT_A (type 0x0 flags 0x0)
ioapic0: int11 attached to pci0 device 15 INT_A (type 0x0 flags 0x0)
ioapic1: int6 attached to pci4 device 4 INT_A (type 0x0 flags 0x0)
ioapic1: int0 attached to pci6 device 1 INT_A (type 0x0 flags 0x0)
ioapic1: int13 attached to pci6 device 8 INT_A (type 0x0 flags 0x0)
ioapic1: int14 attached to pci6 device 8 INT_B (type 0x0 flags 0x0)
ioapic1: int11 attached to pci8 device 7 INT_A (type 0x0 flags 0x0)
ioapic1: int12 attached to pci8 device 7 INT_B (type 0x0 flags 0x0)
local apic: int1 attached to NMI (type 0x1 flags 0x0)
local apic: int0 attached to ExtINT (type 0x3 flags 0x0)
mainbus0: MP WARNING: 288 bytes of extended entries not examined
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20-HE" rev 0x33
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20-HE" rev 0x00
pci1 at pchb1 bus 2
pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20-HE" rev 0x00
pci2 at pchb2 bus 6
isp0 at pci2 dev 1 function 0 vendor "QLogic", unknown product 0x2312 
rev 0x02: apic 13 int 0 (irq 10)
isp0: Polled Mailbox Command (0x2) Timeout
isp0: Polled Mailbox Command (0x8) Timeout
em0 at pci2 dev 8 function 0 "Intel PRO/1000MT Dual Port (82546EB)" rev 
0x01: apic 13 int 13 (irq 11), address: 00:09:6b:89:40:64
em1 at pci2 dev 8 function 1 "Intel PRO/1000MT Dual Port (82546EB)" rev 
0x01: apic 13 int 14 (irq 3), address: 00:09:6b:89:40:65
vga1 at pci0 dev 6 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pchb3 at pci0 dev 15 function 0 "ServerWorks CSB5 SouthBridge" rev 0x93
pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 2.9B> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05: 
apic 14 int 11 (irq 11), version 1.0, legacy support
ohci0: SMM does not respond, resetting
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ServerWorks OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib0 at pci0 dev 15 function 3 "ServerWorks CSB5 PCI" rev 0x00
pchb4 at pci0 dev 16 function 0 "ServerWorks CIOBX2" rev 0x05
pchb5 at pci0 dev 16 function 2 "ServerWorks CIOBX2" rev 0x05
pci3 at pchb5 bus 4
isp1 at pci3 dev 4 function 0 vendor "QLogic", unknown product 0x2312 
rev 0x02: apic 13 int 6 (irq 3)
isp1: Polled Mailbox Command (0x2) Timeout
isp1: Polled Mailbox Command (0x8) Timeout
pchb6 at pci0 dev 17 function 0 "ServerWorks CIOBX2" rev 0x05
pchb7 at pci0 dev 17 function 2 "ServerWorks CIOBX2" rev 0x05
pci4 at pchb7 bus 8
mpt0 at pci4 dev 7 function 0 "Symbios Logic 53c1030" rev 0x07: apic 13 
int 11 (irq 9)
mpt0: sending FW Upload request to IOC (size: 36, img size: 67560)
scsibus1 at mpt0: 16 targets
sd0 at scsibus1 targ 0 lun 0: <LSILOGIC, 1030 IM, 1000> SCSI2 0/direct fixed
sd0: 34678MB, 34679 cyl, 16 head, 127 sec, 512 bytes/sec, 71020545 sec total