[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Need some kernels tested
On Thu, Jun 10, 2004 at 06:03:42PM +0200, Alf Schlichting wrote:
> i386: OpenBSD 3.5-current (GENERIC) #33: Wed Jun 9 12:40:16 MDT 2004: Athlon XP 2600+; make build and build X, desktop stuff, setiathome, nfsd; looks ok
>
> i386: OpenBSD 3.5-current (GENERIC.MP) #18: Wed Jun 9 12:40:36 MDT 2004: Does not work, see dmesg
>
i386: OpenBSD 3.5-current (GENERIC.MP) #49: Fri Jun 11 09:07:28 MDT 2004: Does not work
Tested with pciide bus master disabled and enabled in the bios.
Disabling pciide at UKC> doesn't help.
(Some bytes missing due to serial console weirdos)
D. All rights reserved. http://www.OpenBSD.org
OpenBSD 3.5-current (GENERIC.MP) #49: Fri Jun 11 09:07:28 MDT 2004
deraadt@cvs.openbsd.org:/home/staff/deraadt/src/sys/arch/i386/compile/GENERIC.MP
cpu0: AMD Athlon(tm) XP 2600+ ("AuthenticAMD" 686-class) 1.93 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 536387584 (523816K)
avail mem = 488886272 (477428K)
using 4278 buffers containing 26923008 bytes (26292K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 10/07/03, BIOS32 rev. 0 @ 0xfdb10
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf7ed0/192 (10 entries)
pcibios0: PCI Interrupt Router at 000:02:0 ("SIS 85C503 System" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xfc00
mainbus0: scanning 0x9fc00 to 0x9fff0 for MP signature
mainbus0: scanning 0x9f800 to 0x9fbf0 for MP signature
mainbus0: scanning 0xf0000 to 0xffff0 for MP signature
mainbus0: MP floating pointer found in bios at 0xfbc70
mainbus0: MP config table at 0xf6610, 208 bytes long
mainbus0: Intel MP Specification (Version 1.4) (SiS 746 )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon XP Model 10 ("AuthenticAMD" 686-class) 1.93 GHz
cpu0: FPU,DE,TSC,PAE
cpu0: calibrating local timer
cpu0: apic clock running at 333 MHz
cpu0: kstack at 0xe774f000 for 8192 bytes
cpu0: idle pcb at 0xe774f000, idle sp at 0xe7750fa0
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type ISA
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, virtual wire mode, version 11, 24 pins
ioapic0: int0 attached to ExtINT (type 0x3 flags 0x0)
ioapic0: int1 attached to isa0 irq 1 (type 0x0 flags 0x0)
ioapic0: int2 attached to isa0 irq 0 (type 0x0 flags 0x0)
ioapic0: int16 attached to pci0 device 2 INT_A (type 0x0 flags 0xf)
ioapic0: int16 attached to pci1 device 0 INT_A (type 0x0 flags 0xf)
ioapic0: int16 attached to pci0 device 12 INT_A (type 0x0 flags 0xf)
ioapic0: int17 attached to pci0 device 13 INT_A (type 0x0 flags 0xf)
ioapic0: int19 attached to pci0 device 4 INT_A (type 0x0 flags 0xf)
ioapic0: int20 attached to pci0 device 3 INT_A (type 0x0 flags 0xf)
ioapic0: int21 attached to pci0 device 3 INT_B (type 0x0 flags 0xf)
ioapic0: int23 attached to pci0 device 3 INT_D (type 0x0 flags 0xf)
local apic: int0 attached to ExtINT (type 0x3 flags 0x0)
local apic: int1 attached to NMI (type 0x1 flags 0x0)
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "SIS 746 PCI" rev 0x10
ppb0 at pci0 dev 1 function 0 "SIS 86C202 VGA" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "Nvidia", unknown product 0x314 rev 0xa1
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "SIS 85C503 System" rev 0x25
pciide0 at pci0 dev 2 function 5 "SIS 5513 EIDE" rev 0x00: 746: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
isa_intr_establish: no MP mapping found
wd0 at pciide0 channel 0 drive 0: <WDC WD800LB-55DNA0>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
isa_intr_establish: no MP mapping found
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <ATAPI, CDRW 52X32, Y.DS> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ohci0 at pci0 dev 3 function 0 "SIS 5597/5598 USB" rev 0x0f: apic 2 int 20 (irq 3), version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: SIS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 3 function 1 "SIS 5597/5598 USB" rev 0x0f: apic 2 int 21 (irq 12), version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: SIS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0 at pci0 dev 3 function 2 "SIS 7002 USB" rev 0x00: apic 2 int 23 (irq 10)
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: SIS EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
sis0 at pci0 dev 4 function 0 "SIS 900 10/100BaseTX" rev 0x90: apic 2 int 19 (irq 10), address 00:0b:6a:35:f4:5f
ukphy0 at sis0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000020, model 0x0020, rev. 1
siop0 at pci0 dev 12 function 0 "Symbios Logic 53c810" rev 0x12: apic 2 int 16 (irq 11)
scsibus1 at siop0: 8 targets
emu0 at pci0 dev 13 function 0 "Creative Labs SoundBlaster Live" rev 0x0a: apic 2 int 17 (irq 11)
ac97: codec id 0x83847608 (SigmaTel STAC9708/11)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at emu0
"Creative Labs PCI Gameport Joystick" rev 0x0a at pci0 dev 13 function 1 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
isa_intr_establish: no MP mapping found
lm0 at isa0 port 0x290/8: W83697HF
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
isa_intr_establish: no MP mapping found
pccom0: console
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
isa_intr_establish: no MP mapping found
biomask ff6f netmask ff6f ttymask ffef
cpu0: prelint0 0x700 0x0
cpu0: prelint1 0x10400 0x0
cpu0: timer0 0x300a0 0x0
cpu0: pcint0 0x10000 0x0
cpu0: lint0 0x10700 0x0
cpu0: lint1 0x400 0x0
cpu0: err0 0x1000f 0x0
ioapic0: enabling
ioapic0: int0 0x10700 0x0
ioapic0: int1 0x170 0x0
ioapic0: int2 0x10100 0x0
ioapic0: int3 0x10000 0x0
ioapic0: int4 0x10000 0x0
ioapic0: int5 0x10000 0x0
ioapic0: int6 0x10000 0x0
ioapic0: int7 0x10000 0x0
ioapic0: int8 0x10000 0x0
ioapic0: int9 0x10000 0x0
ioapic0: int10 0x10000 0x0
ioapic0: int11 0x10000 0x0
ioapic0: int12 0x10000 0x0
ioapic0: int13 0x10000 0x0
ioapic0: int14 0x10000 0x0
ioapic0: int15 0x10000 0x0
ioapic0: int16 0xa140 0x0
ioapic0: int17 0xa190 0x0
ioapic0: int18 0x10000 0x0
ioapic0: int19 0xa150 0x0
ioapic0: int20 0xa141 0x0
ioapic0: int21 0xb142 0x0
ioapic0: int22 0x10000 0x0
ioapic0: int23 0xb143 0x0
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
wd0(pciide0:0:0): timeout
type: ata
c_bcount: 512
c_skip: 0
wd0(pciide0:0:0): timeout
type: ata
c_bcount: 512
c_skip: 0
disabling pciide at UKC> gives
wd0(wdc0:0:0): timeout
...
Alf