[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Need some kernels tested



amd64;OpenBSD 3.5-current (GENERIC) #25: Thu Jun 10 12:27:04 MDT 2004;Neo K8T with Athlon64 3000+, 512M RAM, single SATA disk;X11, watch movies via mplayer, make build, Web, editing and other low activity tasks;no major problems

Top is funky:

  PID USERNAME PRI NICE  SIZE   RES STATE WAIT     TIME    CPU COMMAND
20684 _dhcp      2    0 2764K  336K sleep poll     0:00  0.00% dhclient
22950 jaredy    28    0 2272K 1300K (null) -        0:00  0.00% top
[snip]

I also got this message, which happens every time I boot bsd.amd64, but
not my -current kernel from about a week ago.

Jun 10 17:48:02 indifference savecore: /dev/wd0a: Device busy

There are some other problems too, namely with systat(8), but if
kernel structures changed, I suppose that would explain some of
these problems.  However, the system works well.

OpenBSD 3.5-current (GENERIC) #25: Thu Jun 10 12:27:04 MDT 2004
    deraadt@amd64.openbsd.org:/home/staff/deraadt/src/sys/arch/amd64/compile/GENERIC
real mem = 536408064 (523836K)
avail mem = 447410176 (436924K)
using 13147 buffers containing 53850112 bytes (52588K) of memory
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 Processor 3000+, 2000.40 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "VIA K8HTB Host" rev 0x01
ppb0 at pci0 dev 1 function 0 "VIA K8HTB AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon 9200" rev 0x01
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"ATI Radeon 9200 2nd" rev 0x01 at pci1 dev 0 function 1 not configured
dc0 at pci0 dev 6 function 0 "ADMtek AN983" rev 0x11: irq 10, address 00:0c:41:20:2b:f1
ukphy0 at dc0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000749, model 0x0001, rev. 1
dc1 at pci0 dev 7 function 0 "DEC 21142/3" rev 0x30: irq 12, address 00:00:f8:10:33:05
dcphy0 at dc1 phy 31: internal PHY
re0 at pci0 dev 11 function 0 "Realtek 8169" rev 0x10: irq 11, address 00:0c:76:99:20:b2
rgephy0 at re0 phy 7: RTL8169S/8110S media interface, rev. 0 PHY
pciide0 at pci0 dev 15 function 0 "VIA VT8237 SATA" rev 0x80: DMA
pciide0: using irq 10 for native-PCI interrupt
wd0 at pciide0 channel 1 drive 0: <ST3120026AS>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SONY, DVD-ROM DDU1612, DYS3> SCSI0 5/cdrom removable
cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide1: channel 1 disabled (no drives)
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 10
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 10
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB 2.0" rev 0x86: irq 12
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
"VIA VT8237 ISA" rev 0x00 at pci0 dev 17 function 0 not configured
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97 Audio" rev 0x60: irq 12
ac97: codec id 0x414c4760 (Avance Logic <60>)
audio0 at auvia0
pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
lm0 at isa0 port 0x290/8: W83697HF
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
uhub0: port error, restarting port 1
uhub0: port error, giving up port 1
uhub0: port error, restarting port 2
uhub0: port error, giving up port 2
uhub1: port error, restarting port 2
uhub1: port error, giving up port 2
uhub2: port error, restarting port 1
uhub3: port error, restarting port 2
uhub3: port error, giving up port 2
ehci0: handing over low speed device on port 4 to uhci1
uhub4: port 4, device disappeared after reset
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0