[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Need some kernels tested



Hello all,
Ok, It looks like that I jumped the gun on the report. It also happens with
the 3.5's own kernel. Most likely a bad memory chip. Sorry about that. Next
time I'll also include the bsd.i386 AND bsd.mp.i386 reports, as well as a
3.5 (in case of a failure)
cheers,
Masoud
----- Original Message ----- 
From: "Masoud Sharbiani" <masouds@masoud.ir>
To: "Theo de Raadt" <deraadt@cvs.openbsd.org>; <tech@openbsd.org>;
<hackers@openbsd.org>
Sent: Wednesday, June 09, 2004 5:07 AM
Subject: Re: Need some kernels tested


> On Tue, Jun 08, 2004 at 07:50:23PM -0600, Bob Beck wrote:
> > >     ftp://ftp.openbsd.org/pub/OpenBSD/smp/
> > >
> > > contains
> > >
> > >     bsd.alpha   bsd.cats    bsd.i386    bsd.mp.i386 bsd.sparc64
> > >     bsd.amd64   bsd.hppa    bsd.macppc  bsd.sparc   bsd.vax
> > >
> > > Please test all these kernels if you can, with your regularily running
> > > machine.  Please report any failures in as much details as possible.
> > >
> > > New kernels will be placed there about every 24 hours for the next
> > > few days.  You MUST give your kernel date when you mail in, and if
> > > there is a new one when you are about to mail, test it instead, and
> > > discard the results that you saw.
> > >
> >
> > When you test mail your successes to beck@openbsd.org as follows:
> >
> > arch;first line of dmesg;Machine Description;Stuff it's doing;any
comments
> >
> > For example, mail something like this for successes..
> > i386:OpenBSD 3.5-current (GENERIC) #18: Mon Jun  7 14:36:26 MDT
2004:Asus K7V with 1 1.0ghz athlon. + ahc SCSI;Make build in a loop,
mailserver, spamd pf/carp/pfsync; looks ok.
> > sparc64:OpenBSD 3.5-current (GENERIC) #18: Mon Jun  7 14:53:20 MDT
2004:sunblade 150; Ran 1 Make build and built X
> >
> > Failures require *details* to be mailed, and can be mailed to the list.
> > Please make sure it is a failure that happens only with the test kernel,
> > and not with the current snapshot kernel. If you get a kernel crash
> > Please ensure you get dmesg, trace and ps from DDB at a minimum.
> >
> > We would really like to see tests on as wide a spectrum of machines
> > (particularly for i386) as possible.
>
> OK, here it goes:
> i386;OpenBSD 3.5-current (GENERIC.MP) #16: Tue Jun  8 19:23:19 MDT 2004;
IBM IntelliStation M Pro w/2x300MHz P2 + ahc; doing make build; gcc fails in
middle of build with sig11 error
> And here is the dmesg:
> --
> OpenBSD 3.5-current (GENERIC.MP) #16: Tue Jun  8 19:23:19 MDT 2004
>
deraadt@cvs.openbsd.org:/home/staff/deraadt/src/sys/arch/i386/compile/GENERI
C.MP
> cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 300 MHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,MMX
> real mem  = 402223104 (392796K)
> avail mem = 364019712 (355488K)
> using 4278 buffers containing 20213760 bytes (19740K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(00) BIOS, date 04/06/01, BIOS32 rev. 0 @
0xfd831
> pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf2260/192 (10 entries)
> pcibios0: PCI Interrupt Router at 000:02:0 ("Intel 82371FB ISA" rev 0x00)
> pcibios0: PCI bus #1 is the last bus
> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4800
> mainbus0: Intel MP Specification (Version 1.1) (IBM-PCCO CrossFire MP)
> cpu0 at mainbus0: apid 1 (boot processor)
> cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 300 MHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV
> cpu0: calibrating local timer
> cpu0: apic clock running at 66 MHz
> cpu1 at mainbus0: apid 0 (application processor)
> cpu1: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 300 MHz
> cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV
> mpbios: bus 0 is type PCI
> mpbios: bus 1 is type PCI
> mpbios: bus 2 is type ISA
> ioapic0 at mainbus0 apid 2 (I/O APIC)
> ioapic0: pa 0xfec00000, version 11, 24 pins
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82443LX AGP" rev 0x03
> ppb0 at pci0 dev 1 function 0 "Intel 82443LX AGP" rev 0x03
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "3DFX Interactive Banshee" rev 0x03
> wsdisplay0 at vga1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> pcib0 at pci0 dev 2 function 0 "Intel 82371AB PIIX4 ISA" rev 0x01
> pciide0 at pci0 dev 2 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <SONY, CD-ROM CDU611-F, 2.0a> SCSI0 5/cdrom
removable
> cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
> pciide0: channel 1 ignored (disabled)
> uhci0 at pci0 dev 2 function 2 "Intel 82371AB USB" rev 0x01: apic 2 int 19
(irq 15)
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> "Intel 82371AB Power Mgmt" rev 0x01 at pci0 dev 2 function 3 not
configured
> fxp0 at pci0 dev 3 function 0 "Intel 82557" rev 0x02: apic 2 int 19 (irq
15), address 00:60:94:19:2d:23
> inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 0
> ukphy0 at fxp0 phy 2: Generic IEEE 802.3u media interface
> ukphy0: OUI 0x08cb40, model 0x000a, rev. 3
> ahc1 at pci0 dev 9 function 0 "Adaptec AIC-7895" rev 0x03: apic 2 int 17
(irq 11)
> scsibus1 at ahc1: 16 targets
> sd0 at scsibus1 targ 0 lun 0: <IBM, DCHS04U, 6363> SCSI2 0/direct fixed
> sd0: 4303MB, 6077 cyl, 9 head, 161 sec, 512 bytes/sec, 8813870 sec total
> ahc2 at pci0 dev 9 function 1 "Adaptec AIC-7895" rev 0x03: apic 2 int 17
(irq 11)
> scsibus2 at ahc2: 16 targets
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> sysbeep0 at pcppi0
> lpt2 at isa0 port 0x3bc/4: polled
> lm0 at isa0 port 0x290/8: LM78J
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> isapnp0 at isa0 port 0x279: read port 0x203
> wss1 at isapnp0 "CS4236  Audio, CSC0000, , WSS/SB" port
0x534/4,0x388/4,0x220/16 irq 5 drq 1,0: CS4236/CS4236B (vers 0)
> audio0 at wss1
> joy0 at isapnp0 "CS4236  Audio, CSC000F, , Disabled"
> "CS4236  Audio, CSC0010, , CTRL" at isapnp0 port 0x120/8 not configured
> biomask 0 netmask 0 ttymask 0
> ioapic0: enabling
> ioapic0: WARNING: sharing interrupt between different IPLs (currently
broken)
> ioapic0: pin 19, ipls 40..50
> pctr: 686-class user-level performance counters enabled
> mtrr: Pentium Pro MTRR support
> ahc1: target 0 using 16bit transfers
> ahc1: target 0 synchronous at 20.0MHz, offset = 0x8
> dkcsum: sd0 matched BIOS disk 80
> root on sd0a
> rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
> cpu1: starting
> cpu1: init idle stack ptr is 0xe74dbfa0
> cpu1: CPU 0 running
> pmap_page_remove: unmanaged page?
>
> --
> notice the very last line. I got that line twice from /bsd in the console.
> Please let me know if you need more details, or reruns of the test.
>
>
>
> > Thanks,
> > -Bob
> >
>
> cheers,
> Masoud