Compaq question (No not about RAID)

["Alan Jones" <RAJones@teklinks.com>]

Hey guys,

We have several Compaq 1850rs that we are using as a firewall solution.  They are working fine (absent their RAID controllers, but that's a different story).  So my question is, why the heck aren't the drive lights on?  The activity lights come on just fine when there is disk activity, but the "on" light never comes on.  This only happens with OpenBSD, and is not specific to one server.  It is fully patched.

The boss wants drive lights as his Christmas present.  Can you help me out? 

Here is the dmesg, if this helps:

OpenBSD 2.9 (GENERIC) #653: Sat Apr 28 13:57:59 MDT 2001
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 399 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem  = 133787648 (130652K)
avail mem = 119132160 (116340K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x2000
pcibios0: PCI BIOS has 7 Interrupt Routing table entries
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xe8000/0x6000 0xee000/0x2000!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX" rev 0x02
siop0 at pci0 dev 6 function 0 "Symbios Logic 53c875" rev 0x14: irq 5, has RAM
scsibus0 at siop0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST32155W, 0596> SCSI2 0/direct fixed
siop0: target 0 now using tagged 16 bit 20 MHz 15 REQ/ACK offset xfers
sd0: 2049MB, 4177 cyl, 8 head, 125 sec, 512 bytes/sec, 4197405 sec total
siop1 at pci0 dev 6 function 1 "Symbios Logic 53c875" rev 0x14: irq 10, has RAM
scsibus1 at siop1: 16 targets
tl0 at pci0 dev 7 function 0 "Compaq ProLiant Netelligent 10/100 TX" rev 0x10: irq 11 address 00:08:c7:09:de:fc
lxtphy0 at tl0 phy 1: LXT970 10/100 media interface, rev. 0
ukphy0 at tl0 phy 31: Generic IEEE 802.3u media interface
ukphy0: OUI 0x100014, model 0x0001, rev. 5
vga1 at pci0 dev 8 function 0 "ATI Mach64 GV" rev 0x3a
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Compaq Netelligent ASMC" rev 0x00 at pci0 dev 9 function 0 not configured
xl0 at pci0 dev 13 function 0 "3Com 3c905B 100Base-TX" rev 0x64: irq 15 address 00:50:04:49:c5:27
ukphy1 at xl0 phy 24: Generic IEEE 802.3u media interface
ukphy1: OUI 0x001018, model 0x0012, rev. 0
tl1 at pci0 dev 15 function 0 "Compaq Netelligent 10/100 TX" rev 0x10: irq 15 address 00:08:c7:cf:f2:65
nsphy0 at tl1 phy 1: DP83840 10/100 media interface, rev. 1
ukphy2 at tl1 phy 31: Generic IEEE 802.3u media interface
ukphy2: OUI 0x100014, model 0x0001, rev. 5
pcib0 at pci0 dev 20 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 20 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
pciide0: channel 1 ignored (disabled)
uhci0 at pci0 dev 20 function 2 "Intel 82371AB USB" rev 0x01pci_intr_map: no mapping for pin D
: couldn't map interrupt
"Intel 82371AB Power Management" rev 0x02 at pci0 dev 20 function 3 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 460 netmask 8c60 ttymask 9c62
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: sd0 matched BIOS disk 80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02


--
Alan Jones <rajones@teklinks.com>
Applications Developer, Teklinks Inc