[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
CAC_CMD_START_FIRMWARE Failed -- Compaq DL-360
I'm experiencing the problems described in bug #1869. I haven't seen
any activity regarding this issue and I was wondering when and if a fix
might be implemented. I've tried both 2.9 and --current boot images and
neither are able to find any disks attached to the controller. I'll try
and aquire different hardware if this issue isn't going to be addressed
any time soon. If someone could send me a boot image containing the
diff mentioned below I'll give it a try.
Thank you.
-jim
> The following reply was made to PR system/1869; it has been noted by GNATS.
>
> From: Michael Shalayeff <mickey@mail.lucifier.net>
> To: Vaclav Moucha <Vaclav.Moucha@oskarmobil.cz>
> Cc: "'gnats@openbsd.org'" <gnats@openbsd.org>
> Subject: Re: system/1869: Failed install on Compaq DL-360 server
> Date: Mon, 11 Jun 2001 13:59:59 -0400 (EDT)
>
> Making, drinking tea and reading an opus magnum from Vaclav Moucha:
> >
> > >Number: 1869
> > >Category: system
> > >Synopsis: Failed install on Compaq DL-360 server
> > >Confidential: no
> > >Severity: critical
> > >Priority: medium
> > >Responsible: bugs
> > >State: open
> > >Class: sw-bug
> > >Submitter-Id: net
> > >Arrival-Date: Mon Jun 11 09:30:01 MDT 2001
> > >Last-Modified:
> > >Originator: Charlie Root
> > >Organization:
> > net
> > >Release: 1869
> > >Environment:
> > System : OpenBSD 2.9
> > Architecture: OpenBSD.i386
> > Machine : i386 - Compaq ProLiant DL 360 server
> >
> > >Description:
> > Install on Compaq Proliant DL-360 has failed. No disks are found due to
> > error with Compaq
> > Integrated Array. Other operating systems (FreeBSD, Linux) have found disks
> > on the same machine.
> > Dmesg after boot from install floppy disk:
> >
> > OpenBSD 2.9 (RAMDISKB) #269: Sat Apr 28 14:25:31 MDT 2001
> > deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISKB
> > cpu0: Intel Pentium III (Coppermine) ("GenuineIntel" 686-class) 1 GHz
> > cpu0:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,
> > SIMD
> > real mem = 536440832 (523868K)
> > avail mem = 493584384 (482016K)
> > using 5689 buffers containing 26923008 bytes (26292K) of memory
> > mainbus0 (root)
> > bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000
> > pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x2000
> > pcibios0: PCI BIOS has 6 Interrupt Routing table entries
> > pcibios: no compatible PCI ICU found
> > pcibios0: Warning, unable to fix up PCI interrupt routing
> > pcibios0: PCI bus #0 is the last bus
> > bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000! 0xe8000/0x6000
> > 0xee000/0x2000!
> > pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> > pchb0 at pci0 dev 0 function 0 "Reliance Computer CNB20LE Host" rev 0x05
> > pchb1 at pci0 dev 0 function 1 "Reliance Computer CNB20LE Host" rev 0x05
> > pci1 at pchb1 bus 3
> > fxp0 at pci1 dev 4 function 0 "Intel 82557" rev 0x08: irq 5, address
> > 00:50:8b:e0:db:59
> > inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
> > fxp1 at pci1 dev 5 function 0 "Intel 82557" rev 0x08: irq 7, address
> > 00:50:8b:e0:db:58
> > inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 4
> > cac0 at pci0 dev 1 function 0 "Symbios Logic 53c1510" rev 0x02: irq 3 Compaq
> > Integrated Array
> > cac0: CAC_CMD_START_FIRMWARE failed
> > vga1 at pci0 dev 3 function 0 "ATI Mach64 GV" rev 0x7a
> > wsdisplay0 at vga1: console (80x25, vt100 emulation)
> > "Compaq Netelligent ASMC" rev 0x00 at pci0 dev 4 function 0 not configured
> > "Reliance Computer ROSB4 SouthBridge" rev 0x51 at pci0 dev 15 function 0 not
> > configured
> > pciide0 at pci0 dev 15 function 1 "Reliance Computer IDE" rev 0x00: DMA
> > (unsupported), channel 0 configured to
> > compatibility, channel 1 configured to compatibility
> > pciide0: channel 0 ignored (not responding; disabled or no drives?)
> > pciide0: channel 1 interrupting at irq 15
> > atapiscsi0 at pciide0 channel 1
> > scsibus0 at atapiscsi0: 2 targets
> > cd0 at scsibus0 targ 0 lun 0: <COMPAQ, CD-ROM CRN-8241B, 2.23> SCSI0 5/cdrom
> > removable
> > isa0 at mainbus0
> > isadma0 at isa0
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > npx0 at isa0 port 0xf0/16: using exception 16
> > pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> > fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> > biomask 8048 netmask 80e8 ttymask 80ea
> > rd0: fixed, 3560 blocks
> > rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
> >
> > >How-To-Repeat:
> > Boot floppyB29.fs on DL-360 and no disk are found in the setup.
> >
> > >Fix:
> > I don't know.
> >
> > >Audit-Trail:
> > >Unformatted:
>
> can you try it w/ this diff?
> if you need a new kernel built i can do that too.
and here is the diff:
Index: cac.c
===================================================================
RCS file: /cvs/src/sys/dev/ic/cac.c,v
retrieving revision 1.5
diff -u -r1.5 cac.c
--- cac.c 2001/04/23 10:47:56 1.5
+++ cac.c 2001/04/23 15:48:54
@@ -215,7 +215,7 @@
0, 0, CAC_CCB_DATA_IN, NULL)) {
printf("%s: CAC_CMD_START_FIRMWARE failed\n",
sc->sc_dv.dv_xname);
- return (-1);
+ /*return (-1); not fatal */
}
}
--
paranoic mickey (my employers have changed but, the name has
remained)