[OpenBSD 2.9] HP NetRAID 4M (aac driver) Undetected

[Colin Cyr <ccyr@sycore.net>]

I am attempting to implement OpenBSD 2.9, from CD, on an HP NetServer
LC2000r, all hardware (RAM, HP NICs, Built-in IDE & SCSI channels) are all
recognized properly, with the exception of the NetRAID 4M (apparently
supported).

I've referenced the CVS repository for the GENERIC kernel configuration,
it seems to have always included compiled support for the 'aac' driver,
but the card is not being detected.  I haven't found any further
information on this subject.

DOS finds and is able to access both of the RAID containers, the OpenBSD
install initial boot detector finds and identifies hd0 (interim IDE until
RAID is operational), hd1*, and hd2* which are the raid containers.

This is proving to be a major issue that I need to resolve.  Does anyone
have any other information that would prove helpful in getting this
hardware operational?

Thanks,

Colin

P.S. dmesg output follows...
P.P.S. Sorry if this should really be in misc, but after years of hacking
through terrible hardware installs this one has me at the end of my leash.


OpenBSD 2.9 (GENERIC) #653: Sat Apr 28 13:57:59 MDT 2001
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
RTC BIOS diagnostic error
3f<config_unit,memory_size,fixed_disk,invalid_time>
cpu0: Intel Pentium III (Coppermine) ("GenuineIntel" 686-class) 921 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,MMX,FXSR,SIMD
real mem  = 536387584 (523816K)
avail mem = 492584960 (481040K)
using 5689 buffers containing 26923008 bytes (26292K) of memory
RTC BIOS diagnostic error 3f<config_unit,memory_size,fixed_disk,invalid_time>
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 11/01/00, BIOS32 rev. 0 @ 0xfd7d2
pcibios0 at bios0: rev. 2.1 @ 0xfd7d0/0x830
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdf00/224 (12 entries)
pcibios0: PCI Interrupt Router at 000:15:0
pcibios0: PCI Exclusive IRQs: 9
pcibios: no compatible PCI ICU found: ICU vendor 0x1166 product 0x0200
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x800 0xc8800/0x4000!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Reliance Computer CNB20LE Host" rev 0x05
pchb1 at pci0 dev 0 function 1 "Reliance Computer CNB20LE Host" rev 0x05
pci1 at pchb1 bus 3
fxp0 at pci1 dev 2 function 0 "Intel 82557" rev 0x08: irq 9, address 00:03:47:6b:05:3f
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
"DEC Compaq SMART RAID 42xx" rev 0x01 at pci1 dev 4 function 0 not configured
siop0 at pci1 dev 6 function 0 "Symbios Logic 53c896" rev 0x06: irq 5, has RAM
scsibus0 at siop0: 16 targets
siop1 at pci1 dev 6 function 1 "Symbios Logic 53c896" rev 0x06: irq 5, has RAM
scsibus1 at siop1: 16 targets
fxp1 at pci0 dev 4 function 0 "Intel 82557" rev 0x08: irq 9, address 00:30:6e:07:c1:32
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 4
vga1 at pci0 dev 5 function 0 "ATI Mach64 GY" rev 0x7a
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 15 function 0 "Reliance Computer ROSB4 SouthBridge" rev 0x4f
pciide0 at pci0 dev 15 function 1 "Reliance Computer IDE" rev 0x00: DMA
(unsupported), channel 0 configured to compatibility, channel 1 configured
to compatibility
pciide0: channel 0 interrupting at irq 14
atapiscsi0 at pciide0 channel 0
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 1 lun 0: <LITEON, CD-ROM LTN485S, JKF1> SCSI0 5/cdrom removable
wd0 at pciide0 channel 0 drive 0: <FUJITSU M1636TAU>
wd0: 16-sector PIO, LBA, 1226MB, 2490 cyl, 16 head, 63 sec, 2511840 sectors
pciide0: channel 1 ignored (not responding; disabled or no drives?)
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 4060 netmask 4260 ttymask 52e2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302