[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

My system halt when probe rd0 device.

I install OpenBSD on a Gateway2000 p50c Mechine. When booting from floppy,The system halt when probe the rd0 Device.But when I use >boot -c to the UKC mode,I can't find the rd device to disable.the dmesg is shown.

entry point at 0x100020 pciinfo 0xe04fb0e4
Copyright (c) 1982, 1986, 1989, 1991, 1993
 The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2000 OpenBSD. All rights reserved.  http://www.OpenBSD.org
OpenBSD 2.8 (RAMDISKC) #81: Mon Nov  6 11:29:16 MST 2000
cpu0: F00F bug workaround installed
cpu0: Intel Pentium (P54C) ("GenuineIntel" 586-class) 86 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8real mem  = 16363520 (15980K)
avail mem = 11321344 (11056K)
using 225 buffers containing 921600 bytes (900K) of memorymainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 04/23/94, BIOS32 rev. 0 @ 0xf0e1c
pcibios0 at bios0: rev. 2.0 found at 0xf0000[0x10000]
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
pci0 at mainbus0 bus 0: configuration mode 2 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82434LX/NX (Mercury/Neptune) PCI/Cache/DRAM" rev 0x10
"PC Technology RZ1000" rev 0x01 at pci0 dev 1 function 0 not configured
"Intel 82378IB PCI-ISA (System I/O)" rev 0x03 at pci0 dev 2 function 0 not configured
"ATI Mach64 GX" rev 0x01 at pci0 dev 6 function 0 not configuredisa0 at mainbus0
isadma0 at isa0aic0 at isa0 port 0x340/32 irq 11scsibus0 at aic0: 8 targets
aic0: unrecognized MESSAGE EXTENDED; sending REJECT
sd0 at scsibus0 targ 0 lun 0: <COMPAQ, DPES-31080, S70E> SCSI2 0/direct fixed
sd0: 1001MB, 4903 cyl, 4 head, 104 sec, 512 bytes/sec, 2051000 sec total
ne2 at isa0 port 0x280/32 irq 9ne2: NE2000 Ethernet
ne2: address 00:00:21:e1:e5:19npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifopccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60/16 irq 1: vga 80 col, color, 8 scr, mf2-kbd
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
isapnp0 at isa0 port 0x279: read port 0x203
ne3 at isapnp0 "D-Link DE-220P PnP ISA Card, DLK2201, PNP80D6, " port 0x240/32 irq 5
ne3: NE2000 Ethernetne3: address 00:80:c8:d5:d6:90
biomask 840 netmask a60 ttymask a62
rd0: fixed, 3560 blocks