[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Problems w/ 3C562 and current



Hello all.

I'm having some problems with a 3C562 card and current.  When I boot
from floppyC29.fs and disable cbb, the card works like a champ.  After
the install tho, the card doesn't get detected, with or without a disable
cbb.

The machine itself is a Dell Latitude CPi.  

Anyone have any suggestions?  

Here's what it looks like using both floppyC29.fs and the default kernel 
after the install reboot:

------- floppy29C.fs -------

OpenBSD 2.9-current (RAMDISKC) #5: Mon May 14 03:45:45 MDT 2001
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISKC
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 234 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem  = 66699264 (65136K)
avail mem = 58437632 (57068K)
using 839 buffers containing 3436544 bytes (3356K) of memory
User Kernel Config
UKC> disable cbb
 36 cbb* disabled
UKC> exit
Continuing...
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 03/16/98, BIOS32 rev. 0 @ 0xffe90
apm0 at bios0: Power Management spec V1.2
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfb820/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371 PCI-ISA and IDE" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xc000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX" rev 0x02
vga1 at pci0 dev 2 function 0 "Neomagic Magicgraph NM2160" rev 0x01
wsdisplay0 at vga1: console (80x25, vt100 emulation)
"Texas Instruments PCI1131 PCI-CardBus" rev 0x01 at pci0 dev 3 function 0 not configured
"Texas Instruments PCI1131 PCI-CardBus" rev 0x01 at pci0 dev 3 function 1 not configured
"Intel 82371AB PIIX4 ISA" rev 0x01 at pci0 dev 7 function 0 not configured
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IBM-DBCA-206480>
wd0: 16-sector PIO, LBA, 6194MB, 13424 cyl, 15 head, 63 sec, 12685680 sectors
pciide0: channel 0 interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
"Intel 82371AB USB" rev 0x01 at pci0 dev 7 function 2 not configured
"Intel 82371AB Power Management" rev 0x01 at pci0 dev 7 function 3 not configured
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/16384
pcic0 controller 0: <Intel 82365SL rev 2> has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
ep1 at pcmcia1 function 0 "3Com Corporation, 3C562D/3C563D, EtherLink III" port 0x340/16 irq 3: address 00:60:97:85:36:b0, utp/aui/bnc (default utp)
pccom3 at pcmcia1 function 1 "3Com Corporation, 3C562D/3C563D, EtherLink III" port 0x2f8/8 irq 10<3>stray interrupt 3
<3>stray interrupt 3
: ns16550a, 16 byte fifo
pcic0: irq 3, polling enabled
biomask 4040 netmask 4040 ttymask 444a
rd0: fixed, 3560 blocks
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02

------- /bsd after install reboot -------

May 15 02:51:22 lab1 /bsd: OpenBSD 2.9-current (GENERIC) #681: Mon May 14 03:24:19 MDT 2001
May 15 02:51:22 lab1 /bsd:     deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
May 15 02:51:22 lab1 /bsd: cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 234 MHz
May 15 02:51:23 lab1 /bsd: cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
May 15 02:51:23 lab1 /bsd: real mem  = 66699264 (65136K)
May 15 02:51:23 lab1 /bsd: avail mem = 56864768 (55532K)
May 15 02:51:23 lab1 /bsd: using 839 buffers containing 3436544 bytes (3356K) of memory
May 15 02:51:23 lab1 /bsd: User Kernel Config
May 15 02:51:23 lab1 /bsd: UKC> disable cbb
May 15 02:51:23 lab1 /bsd:  94 cbb* disabled
May 15 02:51:24 lab1 /bsd: UKC> exit
May 15 02:51:24 lab1 /bsd: Continuing...
May 15 02:51:24 lab1 /bsd: mainbus0 (root)
May 15 02:51:24 lab1 /bsd: bios0 at mainbus0: AT/286+(00) BIOS, date 03/16/98, BIOS32 rev. 0 @ 0xffe90
May 15 02:51:24 lab1 /bsd: apm0 at bios0: Power Management spec V1.2
May 15 02:51:24 lab1 /bsd: apm0: battery life expectancy 100%
May 15 02:51:24 lab1 /bsd: apm0: AC on, battery charge high, estimated 3:34 hours
May 15 02:51:24 lab1 /bsd: pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
May 15 02:51:24 lab1 /bsd: pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfb820/160 (8 entries)
May 15 02:51:24 lab1 /bsd: pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371 PCI-ISA and IDE" rev 0x00)
May 15 02:51:24 lab1 /bsd: pcibios0: PCI bus #2 is the last bus
May 15 02:51:24 lab1 /bsd: bios0: ROM list: 0xc0000/0xc000
May 15 02:51:24 lab1 /bsd: pci0 at mainbus0 bus 0: configuration mode 1 (bios)
May 15 02:51:24 lab1 /bsd: pchb0 at pci0 dev 0 function 0 "Intel 82443BX" rev 0x02
May 15 02:51:25 lab1 /bsd: vga1 at pci0 dev 2 function 0 "Neomagic Magicgraph NM2160" rev 0x01
May 15 02:51:25 lab1 /bsd: wsdisplay0 at vga1: console (80x25, vt100 emulation)
May 15 02:51:25 lab1 /bsd: wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
May 15 02:51:25 lab1 /bsd: "Texas Instruments PCI1131 PCI-CardBus" rev 0x01 at pci0 dev 3 function 0 not configured
May 15 02:51:25 lab1 /bsd: "Texas Instruments PCI1131 PCI-CardBus" rev 0x01 at pci0 dev 3 function 1 not configured
May 15 02:51:25 lab1 /bsd: pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x01
May 15 02:51:25 lab1 /bsd: pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
May 15 02:51:25 lab1 /bsd: wd0 at pciide0 channel 0 drive 0: <IBM-DBCA-206480>
May 15 02:51:25 lab1 /bsd: wd0: 16-sector PIO, LBA, 6194MB, 13424 cyl, 15 head, 63 sec, 12685680 sectors
May 15 02:51:25 lab1 /bsd: pciide0: channel 0 interrupting at irq 14
May 15 02:51:25 lab1 /bsd: wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
May 15 02:51:25 lab1 /bsd: pciide0: channel 1 ignored (disabled)
May 15 02:51:25 lab1 /bsd: uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
May 15 02:51:25 lab1 /bsd: usb0 at uhci0: USB revision 1.0
May 15 02:51:25 lab1 /bsd: uhub0 at usb0
May 15 02:51:25 lab1 /bsd: uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
May 15 02:51:25 lab1 /bsd: uhub0: 2 ports with 2 removable, self powered
May 15 02:51:25 lab1 /bsd: "Intel 82371AB Power Management" rev 0x01 at pci0 dev 7 function 3 not configured
May 15 02:51:25 lab1 /bsd: isa0 at pcib0
May 15 02:51:25 lab1 /bsd: isadma0 at isa0
May 15 02:51:25 lab1 /bsd: pckbc0 at isa0 port 0x60/5
May 15 02:51:25 lab1 /bsd: pckbd0 at pckbc0 (kbd slot)
May 15 02:51:25 lab1 /bsd: pckbc0: using irq 1 for kbd slot
May 15 02:51:25 lab1 /bsd: wskbd0 at pckbd0: console keyboard, using wsdisplay0
May 15 02:51:25 lab1 /bsd: pms0 at pckbc0 (aux slot)
May 15 02:51:25 lab1 /bsd: pckbc0: using irq 12 for aux slot
May 15 02:51:25 lab1 /bsd: wsmouse0 at pms0 mux 0
May 15 02:51:25 lab1 /bsd: sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.02
May 15 02:51:25 lab1 /bsd: midi0 at sb0: <SB MIDI UART>
May 15 02:51:25 lab1 /bsd: audio0 at sb0
May 15 02:51:25 lab1 /bsd: opl0 at sb0: model OPL3
May 15 02:51:25 lab1 /bsd: midi1 at opl0: <SB Yamaha OPL3>
May 15 02:51:25 lab1 /bsd: pcppi0 at isa0 port 0x61
May 15 02:51:25 lab1 /bsd: midi2 at pcppi0: <PC speaker>
May 15 02:51:25 lab1 /bsd: sysbeep0 at pcppi0
May 15 02:51:25 lab1 /bsd: lpt0 at isa0 port 0x378/4 irq 7
May 15 02:51:25 lab1 /bsd: npx0 at isa0 port 0xf0/16: using exception 16
May 15 02:51:25 lab1 /bsd: pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
May 15 02:51:25 lab1 /bsd: pccom2: irq 5 already in use
May 15 02:51:25 lab1 /bsd: fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
May 15 02:51:25 lab1 /bsd: fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
May 15 02:51:25 lab1 /bsd: pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/65536
May 15 02:51:25 lab1 /bsd: pcic0 controller 0: <Intel 82365SL rev 2> has sockets A and B
May 15 02:51:25 lab1 /bsd: pcmcia0 at pcic0 controller 0 socket 0
May 15 02:51:25 lab1 /bsd: pcmcia1 at pcic0 controller 0 socket 1
May 15 02:51:25 lab1 /bsd: pcic0: irq 3, polling enabled
May 15 02:51:25 lab1 /bsd: biomask 4840 netmask 4840 ttymask 58ca
May 15 02:51:25 lab1 /bsd: pctr: 686-class user-level performance counters enabled
May 15 02:51:25 lab1 /bsd: mtrr: Pentium Pro MTRR support
May 15 02:51:25 lab1 /bsd: dkcsum: wd0 matched BIOS disk 80
May 15 02:51:25 lab1 /bsd: root on wd0a
May 15 02:51:25 lab1 /bsd: rootdev=0x0 rrootdev=0x300 rawdev=0x302

##
-----
Kirk M. Vogelsang <kirk@interliant.com>
Network Engineer
Interliant Consulting and Professional Services
http://www.interliant.com