[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: mx -> dc still doesn't work
Sorry, I shouldn't have said "<ip addresses snipped>". No ip addresses get
assigned, except those from ifaliases. It's like it completely ignores the
hostname files.
Thierry Deval <TDeval@PrimeOBJ.COM> wrote
> Hi,
>
> I have the same problem (with a Cogent EM-110TX).
> It seems there may be something wrong in dcphy ...
Can i have some more info on your setup? Do you have the exact same
problems as me?
Luke
----- Original Message -----
From: Luke Renn <lrenn@etci.com>
To: Chris Cappuccio <chris@dqc.org>
Cc: <tech@openbsd.org>
Sent: Monday, January 17, 2000 12:17 PM
Subject: Re: mx -> dc still doesn't work
> sorry, i should have said more than, "tried that".
>
> First, a current ifconfig -a shows that we are completely 100baseT here:
> mx0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST>
> media: Ethernet 100baseTX half-duplex
> <ip addresses snipped>
> mx1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST>
> media: Ethernet 100baseTX half-duplex
> <ip addresses snipped>
>
> Also, even after the new build the ifconfig says that dc1 exists, but when
> dhcpd starts, it says it can't find that interface. Strange. Hope that
> helps. Wish i had an extra netgear card to donate...
>
> luke
>
> ----- Original Message -----
> From: Chris Cappuccio <chris@dqc.org>
> To: Luke Renn <lrenn@etci.com>
> Cc: <tech@openbsd.org>
> Sent: Monday, January 17, 2000 11:36 AM
> Subject: Re: mx -> dc still doesn't work
>
>
> > It appears as if the order of the cards has changed, e.g. mx0 became dc1
> and
> > mx1 became dc0, because you appear to have a 10bT connection on dc1 and
> > nothing on dc0, where your IPs are configured. So, switch the cables or
> > various /etc configuration.
> >
> > On Sun, 16 Jan 2000, Luke Renn wrote:
> >
> > | dc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST>
> > | media: Ethernet autoselect (none)
> > | status: no carrier
> > | inet 207.103.201.131 netmask 0xffffffff broadcast
> 207.103.201.131
> > | inet6 fe80::2a0:ccff:fe68:6453@dc0 prefixlen 64 scopeid 0x1
> > | inet 207.103.201.132 netmask 0xffffffff broadcast
> 207.103.201.132
> > | inet 207.103.201.133 netmask 0xffffffff broadcast
> 207.103.201.133
> > | inet 207.103.201.134 netmask 0xffffffff broadcast
> 207.103.201.134
> > | inet 207.103.201.135 netmask 0xffffffff broadcast
> 207.103.201.135
> > | inet 207.103.201.136 netmask 0xffffffff broadcast
> 207.103.201.136
> > | inet 207.103.201.137 netmask 0xffffffff broadcast
> 207.103.201.137
> > | inet 207.103.201.138 netmask 0xffffffff broadcast
> 207.103.201.138
> > | inet 207.103.201.139 netmask 0xffffffff broadcast
> 207.103.201.139
> > | inet 207.103.201.140 netmask 0xffffffff broadcast
> 207.103.201.140
> > | inet 207.103.201.141 netmask 0xffffffff broadcast
> 207.103.201.141
> > | inet 207.103.201.142 netmask 0xffffffff broadcast
> 207.103.201.142
> > | inet 207.103.201.143 netmask 0xffffffff broadcast
> 207.103.201.143
> > | inet 207.103.201.144 netmask 0xffffffff broadcast
> 207.103.201.144
> > | inet 207.103.201.145 netmask 0xffffffff broadcast
> 207.103.201.145
> > | inet 207.103.201.146 netmask 0xffffffff broadcast
> 207.103.201.146
> > | inet 207.103.201.147 netmask 0xffffffff broadcast
> 207.103.201.147
> > | inet 207.103.201.148 netmask 0xffffffff broadcast
> 207.103.201.148
> > | inet 207.103.201.149 netmask 0xffffffff broadcast
> 207.103.201.149
> > | inet 207.103.201.150 netmask 0xffffffff broadcast
> 207.103.201.150
> > | inet 207.103.201.151 netmask 0xffffffff broadcast
> 207.103.201.151
> > | inet 207.103.201.152 netmask 0xffffffff broadcast
> 207.103.201.152
> > | inet 207.103.201.153 netmask 0xffffffff broadcast
> 207.103.201.153
> > | inet 207.103.201.154 netmask 0xffffffff broadcast
> 207.103.201.154
> > | inet 207.103.201.155 netmask 0xffffffff broadcast
> 207.103.201.155
> > | inet 207.103.201.156 netmask 0xffffffff broadcast
> 207.103.201.156
> > | inet 207.103.201.157 netmask 0xffffffff broadcast
> 207.103.201.157
> > | inet 207.103.201.158 netmask 0xffffffff broadcast
> 207.103.201.158
> > | dc1: flags=8802<BROADCAST,SIMPLEX,MULTICAST>
> > | media: Ethernet autoselect (10baseT)
> > | status: active
> >
>