Re: PCI card and current problem

[David Terrell <dbt@meat.net>]

I find it useful when maintaining my own kernel config to keep the 
GENERIC $OpenBSD$ tag in it so I can do a cvs diff against that revision
and see what's changed.  And, if you're going to track -current, watch
source-changes.

Several disparate network devices were unified under the dc* device
recently.

On Wed, Jan 12, 2000 at 01:16:19PM +0100, Marco Giardini wrote:
> I have the 2.6 installed and (since the uptime is 18 days) a "current"
> dated approx. 20 days ago.
> I have just updated the source to build the new current.
> Trying to configure the kernel (the old one, no changes at all on it) I
> get:
> OPEN_TECNOGI:244: pn*: unknown device `pn'
> 
> In the kernel the line is as follows:
> pn*     at pci? dev ? function ?    # RealTek 81[23]9 ethernet
> 
> and untill now I have always compiled the kernel.
> 
> The dmesg says:
> pn0 at pci0 dev 16 function 0 "Lite-On PNIC" rev 0x21: irq 10 address
> 00:a0:cc:3d:ab:8a
> pn0: autoneg complete, link status good (half-duplex, 10Mbps)
> 
> and the actual ifconfig:
> pn0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST>
>         media: Ethernet 10baseT half-duplex
>         inet xxx.xxx.xxx.xxx netmask 0xffffffc0 broadcast xxx.xxx.xxx.x
>         
> So ....the same configuration file that worked untill now, is no more
> working.
> Any suggestion?
> 
> Thanks
> 
> .oesse.
> 
> -- 
> ------------------------------------------------------------------
> +-+-+-+-+-+ +-+-+-+-+-+-+-+-+
> |m|a|r|c|o| |g|i|a|r|d|i|n|i|
> +-+-+-+-+-+ +-+-+-+-+-+-+-+-+
> TecnoGi spa                                   Tel. +39 0321 885422
> Strada per Gravellona                         Fax  +39 0321 885333
> Borgolavezzaro (NO)                         http://www.tecnogi.com
> Key fingerprint = B5 B4 AA 91 89 50 43 8F  B1 6B C6 8C 34 79 5A 7F

-- 
David Terrell                             | dbt@meat.net
Prime Minister, Nebcorp Inc               | http://wwn.nebcorp.com/