Re: mplayer (preview)

[Andrey Smagin <andrey@smagin.com>]

On Sun, 5 May 2002 10:31:32 +0200 (MET DST)
"Björn Sandell" <biorn@dce.chalmers.se> wrote:

> Here's a first cut at a mplayer port. The plan is to have it ready
> when 0.90 is released. 

Hello Björn, and thank you for the mplayer port.

Video output works fine here, x11 being the fastest.
I was rather pleased with the performance on my PII-233Mhz CPU - can
actually watch DivX movies now (Windows DivX codec was way too slow
to be usable on the same machine).

Using default 'mp3lib' as audio decoder did not work for some reason:

(...
Detected audio codec: [mp3] drv:1 (MPEG layer-2, layer-3)
Selecting Audio Decoder: [mp3lib] MPEG layer-2, layer-3
init layer2&3 finished, tables done
mp3lib: using Pentium optimized decore!

MPlayer interrupted by signal 11 in module: init_audio_codec 
- MPlayer crashed by bad usage of CPU/FPU/RAM.
...)


I installed mad libraries and recompiled mplayer with
CONFIGURE_ARGS+=--with-extraincdir=/usr/local/include \
		--with-extralibdir=/usr/local/lib

Using 'mad' codec for decoding audio streams and 'oss' as audio output
- this way it works fine on my machine.

Would be nice to have different flavors for mplayer (mad, sdl, gui, etc.)


This is how it looks here:

$ mplayer -vo x11 -ao oss -ac mad the_jackal.avi                                                                    

MPlayer 0.90pre3-2.95.3 (C) 2000-2002 Arpad Gereoffy (see DOCS!)

CPU vendor name: GenuineIntel  max cpuid level: 2
CPU: Intel Pentium II Klamath/Pentium II OverDrive (Type: 6, Stepping: 3)
MMX supported but disabled
CPUflags: Type: 6 MMX: 0 MMX2: 0 3DNow: 0 3DNow2: 0 SSE: 0 SSE2: 0
Compiled for x86 CPU with features:
Reading /home/andrey/.mplayer/codecs.conf: can't open '/home/andrey/.mplayer/codecs.conf': No such file or directory
Reading /usr/local/share/mplayer/codecs.conf: 34 audio & 91 video codecs
font: can't open file: /home/andrey/.mplayer/font/font.desc
font: can't open file: /usr/local/share/mplayer/font/font.desc
Using usleep() timing
Can't open input config file /home/andrey/.mplayer/input.conf : No such file or directory
Falling back on default (hardcoded) config
Playing the_jackal.avi
Detected AVI file format!
MainAVIHeader.dwFlags: (2064) HAS_INDEX TRUST_CKTYPE
VIDEO:  [DIV3]  720x368  24bpp  24.00 fps  147.4 kbps (18.0 kbyte/s)
[V] filefmt:3  fourcc:0x33564944  size:720x368  fps:24.00  ftime:=0.0417
Forcing audio codec: [mad] drv:12 (MAD MPEG layer-2, layer-3)
Selecting Audio Decoder: [libmad] libmad mpeg audio decoder
AUDIO: srate=48000  chans=2  bps=2  sfmt=0x10  ratio: 16000->192000
vo: X11 running at 1280x1024 with depth 24 and 32 bits/pixel (":0.0" => local display)
==========================================================================
Opening Video Decoder: [ffmpeg] FFmpeg's libavcodec codec family
Detected video codec: [ffdivx] drv:5 prio:0 (FFmpeg DivX ;-) (MS MPEG-4 v3))
==========================================================================
AO: [oss] 48000Hz Stereo Signed 16-bit (Little-Endian)
ao2: 48000 Hz  2 chans  Signed 16-bit (Little-Endian)
audio_setup: sample format: Signed 16-bit (Little-Endian) (requested: Signed 16-bit (Little-Endian))
audio_setup: using 2 channels (requested: 2)
audio_setup: using 44100 Hz samplerate (requested: 48000)
audio_setup: frags:   4/4  (16384 bytes/frag)  free:  65536
Start playing...
VDec: vo config request - 720 x 368, Planar YV12  
[PP] Sorry, postprocessing is not available
Movie-Aspect is undefined - no prescaling applied.
VO: [x11] 720x368 => 720x368 Planar YV12 
No accelerated colorspace conversion found
*** [vo] Exporting mp_image_t, 720x368x12bpp YUV planar, 397440 bytes
A:   8.8 V:   5.2 A-V:  3.623 ct:  0.203  125/125  40% 63% 31.7% 49 0 0%