[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

today's snapshot - eth problem

I just installed today's snapshot on 2 machines, a PII/450 and a Cyrix
MII/200. Both boxes use Netgear FA310TX network cards, but on the MII, the
card isn't being detected at all. It works fine on the PII, and on the MII
with the 2.5 kernel. Any suggestions?

Here's the dmesg from the MII machine. The dmesg from the PII is attached:

OpenBSD 2.6-beta (GENERIC) #637: Sat Sep 25 07:44:25 MDT 1999
cpu0: Cyrix 6x86MX (M2) ("CyrixInstead" 686-class) 187 MHz
BIOS mem  = 654336 conventional, 66060288 extended
real mem  = 66715648
avail mem = 58007552
using 840 buffers containing 3440640 bytes of memory
mainbus0 (root)
bios at mainbus0 not configured
isa0 at mainbus0
isadma0 at isa0
wdc0 at isa0 port 0x1f0/8 irq 14
wd0 at wdc0 channel 0 drive 0: <ST33221A>
wd0: 32-sector PIO, LBA, 3077MB, 6253 cyl, 16 head, 63 sec, 6303024 sectors
wd0: supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wdc1 at isa0 port 0x170/8 irq 15
atapiscsi0 at wdc1 channel 0
atapiscsi0: supports PIO mode 4, DMA mode 2
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <COMPAQ, CRD-8322B, 1.03> SCSI0 5/cdrom
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60/16 irq 1: CL-GD5426, 80/132 col, color, 8 scr, mf2-kbd
pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
isapnp0 at isa0 port 0x279: read port 0x203
sb1 at isapnp0 "CMI8330. Audio Adapter, @@@0001, , " port 0x530/8,0x388/8
irq 11 drq 0: sbmatch failed
"CMI8330. Audio Adapter, @H@0001, , " at isapnp0 port 0x330/2 irq 9 not
joy0 at isapnp0 "CMI8330. Audio Adapter, @P@0001, , " port 0x200/8
sb2 at isapnp0 "CMI8330. Audio Adapter, @X@0001, , " port 0x220/16 irq 5 drq
1,5: dsp v4.13
midi1 at sb2: <SB MIDI UART>
audio0 at sb2
opl0 at sb2: model OPL3
midi2 at opl0: <SB Yamaha OPL3>
biomask c040 netmask c040 ttymask d042
pctr: user-level cycle counter enabled
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
IP Filter: initialized.  Default = pass all, Logging = enabled