[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

SCSI disk problem


	I'm having troubles with a couple of SCSI disks. I'm receiving :

sd0: not queued, error 5
sd0: not queued, error 5
sd1: not queued, error 5
etc ...
and computer practically hangs

It's a hardware failure or can I do something ?

OpenBSD 2.4 (ISIL) #2: Wed Sep  8 19:28:44 ART 1999
cpu0: Intel Pentium II ("GenuineIntel" 686-class) 301 MHz
BIOS mem  = 654336 conventional, 66060288 extended
real mem  = 66715648
avail mem = 58933248
using 840 buffers containing 3440640 bytes of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(ff) BIOS, date 10/01/97
bios0: apminfo 0xf046a00c diskinfo 0xf046a034 cksumlen 1 memmap 0xf046a0b0
apm at bios0 function 0x15 not configured
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443LX PCI AGP Controller (PAC)" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443LX AGP Device (PAC)" rev 0x03
pci1 at ppb0 bus 1
"ATI Technologies Rage Pro" rev 0x5c at pci1 dev 0 function 0 not configured
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA Bridge" rev 0x02
"Intel 82371AB IDE controller (PIIX4)" rev 0x01 at pci0 dev 7 function 1 not configured
"Intel 82371AB USB Host Controller (PIIX4)" rev 0x01 at pci0 dev 7 function 2 not configured
"Intel 82371AB Power Management Controller (PIIX4)" rev 0x02 at pci0 dev 7 function 3 not configured
fxp0 at pci0 dev 12 function 0 "Intel 82557" rev 0x02: irq 5, address 00:a0:c9:72:9b:71
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0 at pci0 dev 19 function 0 "3Com 3c905B 100Base-TX" rev 0x30: irq 10 address 00:10:5a:ca:b8:fa
xl0: autoneg complete, link status good (half-duplex, 10Mbps)
isa0 at mainbus0
isadma0 at isa0
aha0 at isa0 port 0x330-0x333 irq 9 drq 5: model AHA-1542CP, firmware D.0
aha0: unlocking mailbox interface
aha0: async, parity
scsibus0 at aha0: 8 targets
sd0 at scsibus0 targ 1 lun 0: <QUANTUM, MAVERICK 540S, 0901> SCSI2 0/direct fixed
sd0: 516MB, 2853 cyl, 4 head, 92 sec, 512 bytes/sec, 1057758 sec total
sd1 at scsibus0 targ 2 lun 0: <QUANTUM, LPS540S, 5900> SCSI2 0/direct fixed
sd1: 516MB, 2740 cyl, 4 head, 96 sec, 512 bytes/sec, 1057616 sec total
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
atapibus0 at wdc0
wd0 at wdc0 drive 0: <ST34342A>
wd0: 4103MB, 8894 cyl, 15 head, 63 sec, 512 bytes/sec, 8404830 sec total
wd0: using 16-sector 16-bit pio transfers, lba addressing
wdc1 at isa0 port 0x170-0x177 irq 15
atapibus1 at wdc1
acd0 at atapibus1 drive 0: <ATAPI CD-ROM DRIVE 32X MAXIMUM, 326P> ATAPI 5/cdrom removable
acd0: 4687Kb/sec, 120Kb cache, audio play, 255 volume levels
npx0 at isa0 port 0xf0-0xff: using exception 16
pccom0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60-0x6f irq 1: generic VGA, 80 col, color, 8 scr, mf2-kbd
pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0-0x3f5 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
isapnp0 at isa0 port 0x279: read port 0x203
sb1 at isapnp0 <Creative ViBRA16X PnP, CTL0043, , Audio> port 0x220/16,0x300/2,0x388/4 irq 7 drq 0,0: dsp v4.16
audio0 at sb1
joy0 at isapnp0 <Creative ViBRA16X PnP, CTL7005, PNPB02F, Game> port 0x201/1
biomask c2c0 netmask c6e0 ttymask d6e2
root on wd0a
pctr: 686-class user-level performance counters enabled
dkcsum: sd0 had no matching BIOS disk
dkcsum: sd1 had no matching BIOS disk
dkcsum: wd0 matched BIOS disk 80
rootdev=0x0 rrootdev=0x300 rawdev=0x302
IP Filter: initialized.  Default = pass all, Logging = enabled

 Ministerio de Economia y Obras y Servicios Publicos
 Secretaria de Hacienda                    Tel    : +54 1 349-6110
 Pablo Luis Bucich                         Fax    : +54 1 349-6505
 Buenos Aires, Argentina                   e-mail : pbucic@mecon.ar
Never attribute to malice that which is adequately explained by stupidity.
                -- Hanlon's Razor