RE: Adaptec AIC-7880 SCSI Adapter

["Christopher M. Terry" <cterry@cs.ua.edu>]

Toby,

Certainly.  The following is a listing of both commands that you requested.

Thanks for your time,

Christopher M. Terry
System Administrator
Computer Science Department
University of Alabama

# fdisk sd0
Disk: sd0	geometry: 274/255/63 [4401810 sectors]
Offset: 0	Signatures: 0xAA55,0x0
         Starting        Ending
 #: id  cyl  hd sec -  cyl  hd sec [     start -       size]
-------------------------------------------------------------------------
 0: 00    0   0   0 -    0   0   0 [         0 -          0] unused
 1: 00    0   0   0 -    0   0   0 [         0 -          0] unused
 2: 00    0   0   0 -    0   0   0 [         0 -          0] unused
*3: A6    0   1   1 -  273 254  63 [        63 -    4401747] OpenBSD
# disklabel sd0
# /dev/rsd0c:
type: SCSI
disk: SCSI disk
label: fictitious
flags:
bytes/sector: 512
sectors/track: 125
tracks/cylinder: 8
sectors/cylinder: 1000
cylinders: 4390
total sectors: 4404489
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0		# milliseconds
track-to-track seek: 0	# milliseconds
drivedata: 0

16 partitions:
#        size   offset    fstype   [fsize bsize   cpg]
  a:   614000       63    4.2BSD     1024  8192    16 	# (Cyl.    0*- 614)
  b:   131000   614063      swap                    		# (Cyl.  614*- 745)
  c:  4404489        0    unused        0     0       	# (Cyl.    0 - 4404*)
#


Incidentally, the same command from a working installation of Linux on the
same machine returns:

Disk /dev/sda: 255 heads, 63 sectors, 274 cylinders
Units = cylinders of 16065 * 512 bytes

   Device Boot   Begin    Start      End   Blocks   Id  System
/dev/sda1            1        1       39   313236   83  Linux native
/dev/sda2           40       40      274  1887637+   5  Extended
/dev/sda5           40       40       48    72261   82  Linux swap