Problems with media/mediaopt Called from /etc/netstart

[vxla@nxio.us]

I have recently been trying to set all my hosts to their maximum
speed. We have a few machines with a fxp0/sis0/bge0 connected to a 
Cisco 3570 switch. All switch ports for these interfaces are set to
100, full-duplex (1000/full-duplex for the interfaces connected to
the bge cards).

Using a hostname.if as listed here, things work fine...

$ cat hostname.fxp0
inet 10.10.10.10 netmask 255.255.128.0 NONE

However, if I try and force interfaces in the hostname.if files to
the following, I get errors...

$ cat hostname.sis0
inet 172.16.0.8 netmask 255.255.255.128 media 100baseTX media-opt full-duplex

Added 'set -x' to the /etc/netstart yields the following:

[snip]

+ route -q add -inet6 ::0.0.0.0 -prefixlen 96 ::1 -reject
+ > /dev/null
+ rtsolif=
+ if=fxp0
+ test fxp0 = *
+ ifstart fxp0
ifconfig: media: bad value

[snip]

I've looked around and the suggestion was to ensure that the remote
side of the connection was set to 100/full-duplex. It is, in this
case.

Note: I can also set fxp0/sis0/bge0 all to use the media/mediaopt
after the system has booted w/o problems; it just doesn't work at
startup being called from /etc/netstart.

I'm just curious to know if this is supposed to behave in this
manner :) If so, I'll run some little script to set the interfaces
appropriately after the interfaces are up.

Here's a dmesg....thanks for any assistance.

OpenBSD 3.5 (GENERIC) #34: Mon Mar 29 12:24:55 MST 2004
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 599 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,MMX,FXSR,SSE
real mem  = 133791744 (130656K)
avail mem = 117886976 (115124K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(8f) BIOS, date 09/27/99, BIOS32 rev. 0 @ 0xfd7a0
pcibios0 at bios0: rev. 2.1 @ 0xfd7a0/0x860
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdf30/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1800 0xe0000/0x4000! 0xe4000/0xc000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD84AA>
wd0: 16-sector PIO, LBA, 8063MB, 16514064 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1 at pciide0 channel 1 drive 0: <WDC WD84AA>
wd1: 16-sector PIO, LBA, 8063MB, 16514064 sectors
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Mgmt" rev 0x02 at pci0 dev 7 function 3 not configured
sis0 at pci0 dev 14 function 0 "NS DP83815 10/100" rev 0x00: DP83815D, irq 11, address 00:09:5b:07:YY:YY
nsphyter0 at sis0 phy 0: DP83815 10/100 integrated, rev. 1
fxp0 at pci0 dev 16 function 0 "Intel 82557" rev 0x0c: irq 9, address 00:02:b3:eb:XX:XX
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072
wsdisplay0 at vga0: console (80x25, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c240 netmask ca40 ttymask cac2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302